24 Food Industry jobs in Fremont
Food Safety and Quality Assurance Senior Supervisor
Posted today
Job Viewed
Job Description
Work is Sweet! 'Quality without Compromise' is not just a motto at See's Candies. It is the most important ingredient in our recipe for success. See's Candies has been in business since 1921 and maintains a reputation for producing the highest quality candy and providing superior customer service. See's is a leader in the confectionary industry with over 250 retail shops across the USA. We are seeking friendly, enthusiastic individuals who are passionate about providing great customer service. Job Description Summary: The Food Safety & Quality Assurance (FSQA) Senior Supervisor is responsible for ensuring See’s Food Safety and Quality programs are fully implemented and documented at each facility to achieve compliance with all applicable federal and state food regulations, Food Safety Modernization Act (FSMA) regulations and the Safe Quality Foods (SQF) code. This position involves direct leadership and management of employees on the facility floor; mastering and applying all See’s Food Safety and Quality policies and procedures in daily interactions with plant and quality employees; utilizing statistical process control (SPC) and other quality improvement tools to meet and continuously improve safety, sustainability, food safety and food quality KPIs. In the absence of FSQA Manager, assumes duties and serve as the sites’ backup SQF Practitioner. The pay range for this position at commencement of employment is expected to be between $75,200K - $101,600K per year; however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience.Job Description: Key Responsibilities: Direct Reports Management Supervise the activities of the QA Inspectors by scheduling coverage, assigning work, providing appropriate training in site-specific standard operating procedures (SOP) and One Point Lessons (OPL). Responsible for all other supervisory activities including, but not limited to, labor budget management, performance evaluation, hiring, discipline, coaching, training and development and termination recommendation. Maintain a safe work environment at all times by having safe work instructions, practices, and procedures in place for QA Inspectors; ensure that employees are trained to understand and comply with those procedures. Apply corrective action consistently when required. Report all unsafe working conditions immediately to management. Operational & Systematic Tasks Demonstrate ownership and practical knowledge of all applicable See’s Food Safety and Quality Program and apply them throughout daily responsibilities to make sound decisions and execute food safety & quality oversight. Able to quickly and thoroughly investigate a product/process failure, determine the root cause and take prompt corrective actions while minimizing product exposure and production down time. Takes initiative to identifying opportunities to enhance technology and innovation that will enhance department effectiveness. Manage relationships with intra- and inter- departmental colleagues and suppliers to ensure achievement of departmental and company-wide targets. Administer all facilities’ hold, release and traceability program. Serves as the primary liaison among Technical Services, Merchandising, Procurement and Regional Packing Teams on Packing Recipe compliance to Technical Service's guidance. Ensure QA Inspectors collaborate with the laboratory staff and coordinators to manage timely release of equipment, ingredients and finished products. Ensure internal records are saved or submitted and reviewed on a timely basis. Report and create corrective actions for deficiencies and missing data. Review all preventative control and quality check records in both paper and electronic formats. Facilitate transitions between shifts for seamless handoffs; communicate key information to peers, team members and Management. Participate in the review, verification and update of hazard analysis critical control point/hazard analysis & risk-based preventive controls (HACCP/HARPC) plans, OPLs, SOPs, registers and forms as needed to protect product safety and quality. Participate in routine facility audit and Corporate audit to ensure site is in compliance to the latest edition of the SQF code. Lead the training of associates at all levels on quality programs, as directed. Support implementation and the execution of the company’s ERP system. Completes special projects as assigned. Serves as a backup for the FSQA Manager and performs FSQA Manager duties and responsibilities in their absence. All See’s staff must be committed to the company’s core principles and workplace values, including a demonstrated commitment to diversity and inclusion. Attendance Regular, punctual, physical attendance is an essential function of this position. Ability to flex hours and work 2nd shift on a weekly basis during in-season, and on a routine basis during off-season to observe and audit QA, operational and sanitation activities. Ability to function as FSQA Manager on 2nd shift and Saturdays during peak seasons. Minimum Qualifications: Bachelor's degree in food science or related science field. 3 years of Quality Assurance experience in the food industry (on-the-job experience maybe substituted with a completed advance degree in Food Science or related science field). Demonstrated self-starter with a high-level of initiative. Demonstrated ability to navigate through ambiguity. Strong communication skills, proven ability to supervise and motivate employees. Ability to work well with others under pressure, in a fast-paced, changing environment. Strong decision making and problem-solving skills. Ability to make intra-day travel to other local See’s facilities within short notice. Experience in supervising teams at multiple locations in person and remotely. PC Proficiency: Windows, MS Office - Word, Excel, Power Point (or equivalent software). Holds SQF Practitioner Certification or has SQF working knowledge. Holds HAPRC/HACCP Certification. Holds PCQI Certification. Conversational Cantonese or Spanish a plus. The total compensation package for this position may also include other elements, in addition to a full range of generous medical, financial, and/or other benefits (including 401(k) eligibility and various paid time off benefits, such as vacation, sick time, and parental leave), dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. If hired, employee will be in an “at-will position” and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors. See's is an EOE See’s will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable local, state or federal law (including San Francisco Ordinance #131192 and Los Angeles Municipal Code 189.00).
Food Safety and Quality Assurance Senior Supervisor
Posted today
Job Viewed
Job Description
'Quality without Compromise' is not just a motto at See's Candies. It is the most important ingredient in our recipe for success. See's Candies has been in business since 1921 and maintains a reputation for producing the highest quality candy and providing superior customer service. See's is a leader in the confectionary industry with over 250 retail shops across the USA. We are seeking friendly, enthusiastic individuals who are passionate about providing great customer service.
The Food Safety & Quality Assurance (FSQA) Senior Supervisor is responsible for ensuring See's Food Safety and Quality programs are fully implemented and documented at each facility to achieve compliance with all applicable federal and state food regulations, Food Safety Modernization Act (FSMA) regulations and the Safe Quality Foods (SQF) code. This position involves direct leadership and management of employees on the facility floor; mastering and applying all See's Food Safety and Quality policies and procedures in daily interactions with plant and quality employees; utilizing statistical process control (SPC) and other quality improvement tools to meet and continuously improve safety, sustainability, food safety and food quality KPIs. In the absence of FSQA Manager, assumes duties and serve as the sites' backup SQF Practitioner. The pay range for this position at commencement of employment is expected to be between $75,200K - $101,600K per year; however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience.
Key ResponsibilitiesDirect Reports Management
- Supervise the activities of the QA Inspectors by scheduling coverage, assigning work, providing appropriate training in site-specific standard operating procedures (SOP) and One Point Lessons (OPL).
- Responsible for all other supervisory activities including, but not limited to, labor budget management, performance evaluation, hiring, discipline, coaching, training and development and termination recommendation.
- Maintain a safe work environment at all times by having safe work instructions, practices, and procedures in place for QA Inspectors; ensure that employees are trained to understand and comply with those procedures. Apply corrective action consistently when required. Report all unsafe working conditions immediately to management.
Operational & Systematic Tasks
- Demonstrate ownership and practical knowledge of all applicable See's Food Safety and Quality Program and apply them throughout daily responsibilities to make sound decisions and execute food safety & quality oversight.
- Able to quickly and thoroughly investigate a product/process failure, determine the root cause and take prompt corrective actions while minimizing product exposure and production down time.
- Takes initiative to identifying opportunities to enhance technology and innovation that will enhance department effectiveness.
- Manage relationships with intra- and inter- departmental colleagues and suppliers to ensure achievement of departmental and company-wide targets.
- Administer all facilities' hold, release and traceability program.
- Serves as the primary liaison among Technical Services, Merchandising, Procurement and Regional Packing Teams on Packing Recipe compliance to Technical Service's guidance.
- Ensure QA Inspectors collaborate with the laboratory staff and coordinators to manage timely release of equipment, ingredients and finished products.
- Ensure internal records are saved or submitted and reviewed on a timely basis. Report and create corrective actions for deficiencies and missing data.
- Review all preventative control and quality check records in both paper and electronic formats.
- Facilitate transitions between shifts for seamless handoffs; communicate key information to peers, team members and Management.
- Participate in the review, verification and update of hazard analysis critical control point/hazard analysis & risk-based preventive controls (HACCP/HARPC) plans, OPLs, SOPs, registers and forms as needed to protect product safety and quality.
- Participate in routine facility audit and Corporate audit to ensure site is in compliance to the latest edition of the SQF code.
- Lead the training of associates at all levels on quality programs, as directed.
- Support implementation and the execution of the company's ERP system.
- Completes special projects as assigned.
- Serves as a backup for the FSQA Manager and performs FSQA Manager duties and responsibilities in their absence.
- All See's staff must be committed to the company's core principles and workplace values, including a demonstrated commitment to diversity and inclusion.
- Regular, punctual, physical attendance is an essential function of this position.
- Ability to flex hours and work 2nd shift on a weekly basis during in-season, and on a routine basis during off-season to observe and audit QA, operational and sanitation activities.
- Ability to function as FSQA Manager on 2nd shift and Saturdays during peak seasons.
- Bachelor's degree in food science or related science field.
- 3 years of Quality Assurance experience in the food industry (on-the-job experience maybe substituted with a completed advance degree in Food Science or related science field).
- Demonstrated self-starter with a high-level of initiative.
- Demonstrated ability to navigate through ambiguity.
- Strong communication skills, proven ability to supervise and motivate employees.
- Ability to work well with others under pressure, in a fast-paced, changing environment.
- Strong decision making and problem-solving skills.
- Ability to make intra-day travel to other local See's facilities within short notice. Experience in supervising teams at multiple locations in person and remotely. PC Proficiency: Windows, MS Office - Word, Excel, Power Point (or equivalent software).
- Holds SQF Practitioner Certification or has SQF working knowledge.
- Holds HAPRC/HACCP Certification.
- Holds PCQI Certification.
- Conversational Cantonese or Spanish a plus.
The total compensation package for this position may also include other elements, in addition to a full range of generous medical, financial, and/or other benefits (including 401(k) eligibility and various paid time off benefits, such as vacation, sick time, and parental leave), dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. If hired, employee will be in an "at-will position" and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors.
See's is an EOE. See's will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of applicable local, state or federal law (including San Francisco Ordinance #131192 and Los Angeles Municipal Code 189.00).
Director, Quality Control
Posted today
Job Viewed
Job Description
Revolution Medicines is a clinical-stage precision oncology company focused on developing novel targeted therapies to inhibit frontier targets in RAS-addicted cancers. The company's R&D pipeline comprises RAS(ON) Inhibitors designed to suppress diverse oncogenic variants of RAS proteins, and RAS Companion Inhibitors for use in combination treatment strategies. As a new member of the Revolution Medicines team, you will join other outstanding scientists in a tireless commitment to patients with cancers harboring mutations in the RAS signaling pathway.
The Opportunity:
Playing a project leading role and Subject Matter Expert (SME) of late phase and commercial Quality Control within in Quality Control within the CMC function, this position will be responsible for overseeing a team and individually contributing to the management of QC activities from process validation to commercial launch readiness supports of drug substance (DS), drug product (DP) and final product (FP) manufacturing. The candidate will also be responsible for post-approval QC related activities including lifecycle management regulatory submissions such as CBE, PAS, etc.
- Provide strategic and tactical ownership for QC activities of late phase and commercial programs, including but not limited to commercial launch readiness including establishment of CDMO and/or CTL.
- End to end process management for analytical purposes in support of manufacturing operations for release of commercial product.
- Oversee and manage outsourced commercial QC activities at CDMOs and/or contract testing labs (CTLs) for release and stability purposes.
- Manage quality events related to commercial QC testing such as lab investigation (e.g., OOS/OOT), deviations, change controls (e.g., CBE 30/CBE 0) and CAPAs.
- Support regulatory submissions and commercial life cycle management to maintain operational uniformity.
- Collaborate with cross functional teams including CMC RA, DS, DP, Supply Chain and Quality Assurance to achieve project goals per timelines.
- BS or MS in Chemistry, Pharmaceutical Science or related discipline.
- 10+ years of relevant industrial experience in analytical development/QC.
- Solid understanding of relevant compliance and regulatory requirements as applicable to data integrity, process validation, manufacture sampling and testing, stability study, method validation and transfer, etc.
- Effective written and verbal communication skills and interpersonal skills.
- Extensive knowledge and understanding of cGMP guidelines and practices, as well as related / best industry practices.
- Strong problem-solving skills with sound technically driven decision-making ability
- Excellent communication skills (verbal, written and technical), strong interpersonal/collaboration skills and planning skills.
- Ability to think critically and creatively and be able to work independently to determine appropriate resources for resolution of problems.
- Ability to multi-task and thrive in a fast-paced innovative environment.
- Experience in solid oral dosage including dissolution testing.
- Work experience and knowledge of global regulatory submissions (IND, IMPD, NDA and MAA, etc.) is preferred.
- Commercial QC experience.
- Chromatographic experience in development, optimization, and troubleshooting.
The base salary range for this full-time position is $204,000 to $255,000 for candidates working onsite at our headquarters in Redwood City, CA. The range displayed on each job posting is intended to be the salary for an individual working onsite in Redwood City and will be adjusted for the local market a candidate is based in. Our salary ranges are determined by role, level, and location. Individual pay is determined by multiple factors, including job-related skills, experience, market dynamics, and relevant education or training.
Please note that base salary is one part of the overall total rewards program at RevMed, which includes competitive cash compensation, robust equity awards, strong benefits, and significant learning and development opportunities.
Revolution Medicines is an equal opportunity employer and prohibits unlawful discrimination based on race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, disability, marital status, medical condition, and veteran status.
Revolution Medicines takes protection and security of personal data very seriously and respects your right to privacy while using our website and when contacting us by email or phone. We will only collect, process and use any personal data that you provide to us in accordance with our CCPA Notice and Privacy Policy. For additional information, please contact
#LI-Hybrid #LI-CT1
Quality Control Inspector
Posted today
Job Viewed
Job Description
Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.
Job Purpose :
Performs product inspection and/or audits of quality control programs. Performs packaging line and manufacturing inspections, and sampling and testing of incoming components and raw materials. Ensures raw materials, in-process and finished products meet company standards. May apply approval or rejection labels to bulk raw materials once analytical data is evaluated.
Nature of Duties/Responsibilities:
- Responsible for providing immediate quality feedback to SMT operators while running the line.
- Responsible for scanning findings in quality tool
- Responsible to perform FA (First Articles)
- Responsible to read and interpret work instructions, Deviations, BOM's, Travelers etc.
- Able to help other areas such as TLA inspection, Final QC, Final Kit Audit Verification.
- Minimum of 2-4 years of experience in SMT Quality Assurance Control/Inspection process per IPC-610 class 2,3 (PCBA and Mechanical components)
- Experience in feeder verification on and off line
- Minimum knowledge in component ID, polarity verification, workmanship inspection, part value verification using digital meter.
- Experience using microscopes, Ohm meters, manual and stationary magnifying glass
- Good written and verbal communication
- Computer literate
Sanmina is an Equal Opportunity Employer
Salary Range(annual): $42,000 - $3,000 ( 20 - 25 / hourly)
Actual base pay within this range (determined at the offer stage) will be based on a candidate's years of relevant work experience, education, certifications, and skills, and is just one element of our total rewards package. The total rewards package also includes a variety of benefits, including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business and, depending on the role, may include eligibility for restricted stock unit awards and participation in a discretionary bonus program.
Quality Control Supervisor
Posted today
Job Viewed
Job Description
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Provide day-to-day supervision of all inspection and metrology activities, including incoming, in-process, final, and CMM inspection.
- Manage and develop a team of Quality Control Inspectors (QCIs), CMM Programmers, and metrology personnel through coaching, performance feedback, and skills cross-training to ensure a flexible and capable inspection function.
- Prioritize and coordinate daily inspection workload to support production flow, meet delivery commitments, and minimize delays or bottlenecks.
- Lead the implementation and continuous improvement of a modern, risk-based inspection strategy that aligns inspection methods with part criticality and manufacturing capabilities.
- Partner cross-functionally with CNC programming, engineering, and production to proactively identify quality risks, drive manufacturability improvements, and integrate inspection into upstream processes.
- Support new product introduction (NPI) and design-for-manufacturing (DFM) initiatives by developing right-sized inspection plans and ensuring readiness of inspection processes and resources.
- Maintain working knowledge of CMM programming (Calypso preferred) to provide technical oversight, while delegating routine programming tasks to support personnel where applicable.
- Monitor and improve inspection efficiency, accuracy, and data integrity; support metric tracking and corrective action efforts tied to internal and customer quality performance.
- Champion a culture of quality, accountability, and problem-solving within the inspection team.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following:
- Deep knowledge of aerospace/defense industry quality standards (AS9100, GD&T, NADCAP experience is a plus).
- Strong understanding of risk-based quality inspection principles and PFMEA/Control Plan elements.
- Proficient in CMM programming (Calypso preferred), but capable of leading others rather than owning all programming responsibilities.
- Experience working in fast-paced, high-mix machining or manufacturing environments.
- Comfortable leading cross-functional efforts and influencing without direct authority.
- Strong communication, coaching, and problem-solving skills.
- Bachelor of Science in related field which can be substituted with commensurate experience.
- 7+ years in quality inspection or metrology, with 3+ years in a leadership or supervisory role.
- QCIs are cross-trained, agile, and engaged with production.
- Reduce overreliance on CMM as a default inspection solution-inspection methods should suit application-specific requirements.
- You are present and involved in daily operations, not isolated to a desk or programming booth.
- Inspection strategy is visibly improving throughput and quality performance.
MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's.
REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
CERTIFICATES, LICENSES, REGISTRATIONS : Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to a hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration and/or other occupational hazards; personal protective equipment may be required.
NOTE: This job description identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this job description and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company.
Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who:
- Is not a United States citizen
- Is not lawfully admitted for permanent residence in the U.S.
- Does not have politically protected status (embassy, refugee, or asylum)
- Has dual U.S. / foreign citizenship
Vitesse Systems, LLC is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer
Quality Control Inspector
Posted 4 days ago
Job Viewed
Job Description
Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.
Job Purpose :
Performs product inspection and/or audits of quality control programs. Performs packaging line and manufacturing inspections, and sampling and testing of incoming components and raw materials. Ensures raw materials, in-process and finished products meet company standards. May apply approval or rejection labels to bulk raw materials once analytical data is evaluated.
Nature of Duties/Responsibilities:
- Responsible for providing immediate quality feedback to SMT operators while running the line.
- Responsible for scanning findings in quality tool
- Responsible to perform FA (First Articles)
- Responsible to read and interpret work instructions, Deviations, BOM's, Travelers etc.
- Able to help other areas such as TLA inspection, Final QC, Final Kit Audit Verification.
Education and Experience:
- Minimum of 2-4years of experience in SMT Quality Assurance Control/Inspection process per IPC-610 class 2,3 (PCBA and Mechanical components)
- Experience in feeder verification on and off line
- Minimum knowledge in component ID, polarity verification, workmanship inspection, part value verification using digital meter.
- Experience using microscopes, Ohm meters, manual and stationary magnifying glass
- Good written and verbal communication
- Computer literate
Sanmina is an Equal Opportunity Employer
Salary Range(annual):$42,000 - $3,000 ( 20 - 25 / hourly)
Actual base pay within this range (determined at the offer stage) will be based on a candidate's years of relevant work experience, education, certifications, and skills, and is just one element of our total rewards package. The total rewards package also includes a variety of benefits, including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business and, depending on the role, may include eligibility for restricted stock unit awards and participation in a discretionary bonus program.
Quality Control Supervisor-Machining
Posted 8 days ago
Job Viewed
Job Description
22 hours ago Be among the first 25 applicants Get AI-powered advice on this job and more exclusive features. This range is provided by FM Industries. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. Base pay range $80,000.00/yr - $0,000.00/yr Salary Range: 80,000.00 To 90,000.00 Annually FM Industries is recognized as a premier manufacturing solutions provider of manufacturing services for the semiconductor capital equipment market. We specialize in build to print, precision machined components, anodization and engineered thermal spray coatings. FM Industries promotes an environment that not only encourages your best, but also rewards it with plenty of room to grow. FM industries is a premier manufacturing solutions provider. We have locations in Northern California and Phoenix, Arizona. Since 2002, the business has been part of NGK Insulators , based in Nagoya, Japan. Our partnership with NGK is highly collaborative and complimentary. SUMMARY OF POSITION: The primary responsibility of this position is to plan, analyze, administer, and coordinate the Quality Assurance functions of Quality Control. Supervise and program CMM’s and inspect parts as needed to maintain the production schedule and on-time deliveries. ESSENTIAL DUTIES: Plan and administer the Quality Control function of the department. Create and execute inspection methods and techniques that will assure quality is achieved and maintained. Coordinate quality activity with entire quality control staff to enhance teamwork and continuous improvement throughout the plant. Analyze the performance of our quality control system and work with people at all levels to meet customer’s requirements for Total Quality performance. Supervise inspectors to accomplish first piece/first article inspections, in-process inspection, final inspections, Certificate of Conformance (CoC) and outside process receiving inspection tasks as required. Manage all assigned labor (time and attendance) and fixed cost for the inspection department. Maintain a calibration system which includes employee owned measuring tools as well as company owned measuring equipment. Assure current print revisions and current process instructions are readily available for inspection of assigned parts. Inspection records shall be maintained which show pertinent information for each production run of assigned parts. Measure and analyze key quality performance data. Make recommendations to management on specific opportunities to improve quality. Develop training and procedures to support and audit operator in-process inspections and required documentation. Develop and implement quality plans on an ongoing basis. The quality plan should specify the requirements for people, equipment and systems to be used for continuous improvement of quality. Recommend changes to documentation which supports quality improvement, (i.e., Engineering Change Requests, process instructions, raw material requirements). Leads and applies the principles of “Total Quality” to the workplace, to include 5S and safety standards. Participate and maintain assigned responsibility for ISO 9001:2008 documented quality systems. Be responsible for insuring that inspectors know and comply with all ISO 9001:2008 requirements within their area of responsibility. Provide quality inspection support of a value stream in a back-up support role as needed. Monitor all tooling / inspection equipment inventory, purchase new equipment and supervise the repair of inspection equipment. Supervise 6-10 hourly inspectors Executes necessary precautions to ensure safety and compliance with Company, OSHA, and other standards and regulations Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices. EDUCATION AND/OR EXPERIENCE REQUIRED: High school graduate or equivalent. Degree in Business Administration, Quality Management, Logistics, Supply Chain Management. 3 to 5 years experience of quality control and machining in manufacturing environment. Experience in supervising and leading a manufacturing team. This position will supervise 6-10 hourly inspectors. Experience and knowledge reading drawings (prints) is required. Experience and knowledge working with GD&T Experience supervising and working on shop floor environment Inspection lab and processing experience Experience in semi-conductor, medical device, automotive, aerospace or precision machining manufacturing Thorough understanding and utilization of the root cause/corrective action process onsite and within supply base Detail orientated and organized, with ability to work at a high level of accuracy Ability to interact with fellow employees in a professional manner Strong problem-solving and analytical abilities Independent, can work with limited supervision and direction CULTURE: At FM Industries our success is powered by people and technology. Our culture is what makes FM a fun and rewarding place to work. We champion diversity and we are always seeking new ways to amaze our customers. Success is celebrated and integrity is the core of who we are at FM Industries. WHAT CAN BE OFFER YOU FOR ALL YOUR HARD WORK? PTO Program Medical, Dental, Vision and Life Insurance Short and Long-Term Disability Coverage Tuition Assistance Pet Insurance Flexible Spending Plans Health Spending Plans 401(k) Retirement Savings - with a generous company match! Give us your best and we'll give you ours! Seniority level Seniority level Associate Employment type Employment type Full-time Job function Job function Engineering and Quality Assurance Industries Semiconductors Referrals increase your chances of interviewing at FM Industries by 2x Inferred from the description for this job Medical insurance Vision insurance Disability insurance Tuition assistance Get notified about new Quality Control Supervisor jobs in Fremont, CA . Newark, CA $82,000. 0- 114,000.00 1 month ago Union City, CA 66,129.00- 120,817.00 3 weeks ago Newark, CA 80,000.00- 95,000.00 6 days ago Fremont, CA 72,000.00- 120,000.00 2 weeks ago Hayward, CA 65,000.00- 75,000.00 2 months ago Newark, CA 80,000.00- 90,000.00 1 week ago Hayward, CA 95,000.00- 120,000.00 22 hours ago San Jose, CA 77,000.00- 91,000.00 2 months ago San Jose, CA 77,000.00- 91,000.00 1 week ago Assembly Solutions Production Supervisor Santa Clara, CA 80,300.00- 100,400.00 1 month ago Assembly Solutions Production Supervisor Food Safety and Quality Assurance Senior Supervisor South San Francisco, CA 75,200.00- 101,600.00 2 weeks ago SBC Clinical Laboratory Scientist I - Night Shift (10 or 11pm start) SBC Clinical Laboratory Scientist I - Technical Services - Evening Shift (2pm Start) SBC Clinical Laboratory Scientist I - Night Shift (10 or 11pm start) SBC Clinical Laboratory Scientist I - Technical Services - Evening Shift (2pm Start) Clinical Lab Scientist - Histocompatibility & Immunogenetics /HLA Lab - Overnight Shift Social Science Research Professional 1, General Surgery (Hybrid Opportunity) We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI. #J-18808-Ljbffr
Be The First To Know
About the latest Food industry Jobs in Fremont !
Lead Quality Control Engineer
Posted 1 day ago
Job Viewed
Job Description
**Compensation Range (Northern California Only) Depending on project location**
+ Salary: $87,000 - $1,350
+ COLA: 4,800 (Sacramento ) 33,000 (Bay Area)
+ Total Compensation: 91,800 - 124,350
**Employment Offer Contingent Upon Successful Completion of the Following:**
+ Verification of Work Authorization and Employment Eligibility
+ Substance Abuse Screening
+ Physical Exam (if applicable)
+ Background Checks for Badging/Security Clearances (if applicable)
**About Hensel Phelps:**
Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property.
The Hensel Phelps Way is built on four pillars: People, Process, Partnership and Technology.
**Position Description:**
The Lead Quality Control Engineer (LQCE) will be experienced in managing the QC process on Hensel Phelps projects and in exercising judgment and discretion in making quality control-related recommendations, implementing quality control policies and procedures, and handling a wide variety of quality control matters in the field and office. They may be tasked with assisting and mentoring less-experienced QC engineers when multiple QC resources are deployed on a single large project. Alternatively, they may be tasked with performing QC activities on multiple smaller projects. This is a safety sensitive position
**Position Qualifications:**
+ A 4-year degree in civil or structural engineering, architecture or construction management.
+ Minimum of 3-5 years' experience on large commercial construction projects.
+ Strong communication skills.
+ Technically experienced and capable of comprehending the specifications, standards, and code requirements for all disciplines (i.e., architectural, civil, structural, mechanical, and electrical).
+ Computer software - Microsoft Office Suite, specifically Excel-based templates, Prolog, Primavera and AutoCAD.
**Essential Duties:**
+ Review and update the project quality process log (QPL) and provide comments to the QC manager.
+ Under the oversight of the PS, direct the removal and replacement of non-conforming work and stop work not in compliance with the contract.
+ Be fully aware of the contract, plans, specifications and applicable codes. Submit and review RFIs to ensure changes are implemented in the field.
+ Receive trade partner test and inspection requests and produce a coordinated daily test and inspection schedule.
+ Actively participate in the work completion tagging process, in-house punch list process and the pre-final punch list process to document deficient items in the field.
+ Audit trade partner quality control procedures and participate in the quality recognition program.
+ Actively participate in the continuous improvement process (CIP) and lessons learned and be a leading advocate for these programs.
+ Perform safety and housekeeping inspections through the SAFE program.
**Physical Work Classification & Demands:**
Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects.
- The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity.
- Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc.
- Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer.
- The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration.
- Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas.
- The person in this position regularly sits in a stationary position in front of a computer screen.
- Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements.
- Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights.
- Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch.
- Stooping - Bending the body downward and forward by the spine at the waist.
- Visual acuity and ability to operate a vehicle as certified and appropriate.
- Occasionally exposed to high and low temperatures
- Frequently exposed to noisy environments and outdoor elements such as precipitation and wind.
**Benefits:**
Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps' policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment).
**Equal Opportunity and Affirmative Action Employer:**
Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law.
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)
#LI-KF1
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights ( notice from the Department of Labor.
Environmental Health & Safety Specialist - Food Manufacturing
Posted 1 day ago
Job Viewed
Job Description
This operating company (OpCo) based position will assist with the implementation of prevention-focused health, safety, and environmental (HSE) and security programs. The position will assist and promote OpCo-specific project implementation and training to support Sysco's overall HSE objectives, including security and crisis preparedness objectives.
**RESPONSIBILITIES**
+ Complete new hire orientation training programs as assigned by the safety director.
+ Maintain records for safety programs (ie training logs, reports, inspections).
+ Implement and train new or existing training programs, provided by safety director, to employees and supervision as needed.
+ Inspect facilities to detect existing or potentially unsafe conditions.
+ Participates in investigations on vehicle accidents and injuries.
+ Assist with the identification of root causes and helps supervision develop corrective actions when needed.
+ Engages associates to properly follow work methods in their daily job functions.
+ Completes observations and coaching of high-risk associates as needed
+ Monitors inspection of equipment to detect existing or potential failures and recommends corrective/preventative measures where indicated.
+ Support site management in the implementation of health, safety, and environmental (HSE) plans.
+ Promotes a workplace that is a proactive safety culture.
+ Provide supervisor and management training on root cause analysis.
+ Interface with regulatory bodies (OSHA, DOT, EPA, and State/Local Regulators) in the safety director's absence.
+ Assists with the completion of a company-wide annual HSE training plan.
+ Promote zero-incident HSE culture throughout the company.
+ Support execution of Sysco's emergency preparedness plan procedures and policies.
+ Maintains associate relations through regular interactions and communication, monitors associate morale and provides feedback to leadership when needed.
**QUALIFICATIONS**
**Education**
+ Associate's degree and/or a minimum of 2 years of safety experience with OSHA certifications.
**Experience**
+ 2+ years with direct hands-on safety experience in a warehousing, manufacturing or transportation operation.
+ 2+ years of experience with occupational safety preferred.
**Certificates, Licenses, and Registrations**
+ Has attained or is working toward certification in safety as a recognized safety professional.
+ Must possess a valid Driver's License.
**Professional Skills**
+ Strong interest in safety with a proven record of results.
+ The ability to drive a strong safety philosophy and implement constructive behavior changes in operations safety.
+ Excellent analytical skills.
+ Ability to interact effectively with all levels of management, supervision, and employees.
+ Demonstrate excellent verbal communication, written communication, and presentation skills.
+ Leadership and team-building skills.
+ Able to influence decision-makers.
+ Demonstrated knowledge of spreadsheet and word processing software, and the ability to learn Sysco technology software and programs.
+ Effectively using time and resources to accomplish overall initiatives and program goals.
+ Analyze and independently solve a variety of difficult situations and problems.
+ Successfully demonstrate leadership framework competencies.
+ Develop effective interdepartmental relationships.
+ Demonstrate professional maturity and ability to act as a change member.
**Physical Demand**
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of this job.
+ Regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear.
+ The employee is frequently required to sit and reach with hands and arms.
+ The employee must occasionally lift and/or move up to 20 pounds.
**Work Environment**
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of this job.
+ This position will be performed at the assigned operating company facilities.
+ Must be able to do limited travel to Sysco facilities or operating companies.
+ The noise level in the work environment is usually moderate.
NOTICE: The above statements are intended to describe the general nature of the environment and the level of work being performed by this job. This job description in no way states or implies that these are the only tasks to be performed by the employee in this job. He or she will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor.
**#LI-GR1**
**#LI-ONSITE**
AFFIRMATIVE ACTION STATEMENT:
Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.
Quality Control Inspector - Graveyard Shift
Posted 5 days ago
Job Viewed
Job Description
***
Job Summary:
Performs a variety of inspection procedures to ensure quality levels at various stages of manufacturing at or above the standard. Support the organization goals in achieving total customer satisfaction.
Key Responsibilities:
- Inspect in-process or finished production assemblies and sub-assemblies for conformance to quality assurance standards
- Working from blueprint, engineering change notices, or established operating procedures determine acceptance or rejection or rework requirements of a part
- May evaluate new procedures for non-standard rest and perform special set-up on new equipment
- Assist others in correcting or preventing deficiencies in quality or workmanship
- Give work direction to other inspectors
- Know your customers' expectations and drive action to meet them
- Perform first article process
- Identify component
- Perform related work as assigned
Education: Secondary/High School, Certificate Diploma
Experience: 6+ Years preferably in Quality a plus
Required skill:
- PCBA Experienced
- Able to use measurement equipment.
- Must be able to read ECO/Dev instruction/build drawer and BOM.
- Familiar with SMT and identify component, IPC 610 Knowledge and preferred IPC Cert. Familiar w/ First Piece and First Article process.
- Attention to detail
- Communication skills - verbal and written
- Organized and good critical thinking skills
- Data collection, management and analysis
- Team work
- Ability to interpret complex customer rules and regulations
- Demonstrated skills in project management and ability to train others to lead projects
- Works well independently
- Excellent interpersonal and communication skills
- Ability to manage time and prioritize multiple task in a fast paced environment
- Proficient in use of MS Office applications
- Knowledge of Lean manufacturing fundamentals
FabrinetWest including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identify, age, disability, genetic