807 Operating Engineer jobs in the United States

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Perform all plumbing, electrical, or HVAC requirements of the building(s)

Maintain heating equipment, chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.

Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings

Verify field conditions and perform any necessary repairs or adjustments

Monitor Energy Management

Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property

Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)

Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.

Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris

Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management

Document and report activities to supervisor

Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns

Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits

Complete all required C&W Safety Training as scheduled annually

Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

Key Competencies:

Technical Proficiency

Initiative

Flexibility

Multi-tasking

Sense of Urgency

Important Education:

High School Diploma or GED Equivalent

Graduate of apprentice program or trade school preferred

Important Experience:

5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

Additional Eligibility Qualifications:

Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)

May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements

Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)

Basic Computing Skills in Outlook, Excel & Word

Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.

Knowledgeable in energy management systems, techniques and operations.

Thorough knowledge in all building systems operations, maintenance and repair.

May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties.

Work Environment:

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices

Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine

Involves movement between departments, floors, and properties to facilitate work

Ability to speak clearly so others can understand you

Ability to read and understand information presented orally and in writing

Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

AAP/EEO Statement:

C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Essential Functions and Responsibilities:

• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

Key Competencies:

• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency

Important Education:

• High School Diploma or GED Equivalent
• Graduate of apprentice program or trade school preferred

Important Experience:

• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

Additional Eligibility Qualifications:

• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.
• May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

Work Environment:

• This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.
• Regularly required to travel outside between properties in varying weather conditions.

Physical Demands:

• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
• Involves movement between departments, floors, and properties to facilitate work
• Ability to speak clearly so others can understand you
• Ability to read and understand information presented orally and in writing
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

AAP/EEO Statement:

Cushman & Wakefield provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

Other Duties:

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties

Perform all plumbing, electrical, or HVAC requirements of the building(s)
Maintain heating equipment, chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
Verify field conditions and perform any necessary repairs or adjustments
Monitor Energy Management
Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
Document and report activities to supervisor
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
Complete all required C&W Safety Training as scheduled annually
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

KEY COMPETENCIES Technical Proficiency Initiative Flexibility Multi-Tasking Sense of Urgency

IMPORTANT EDUCATION High School Diploma of GED Equivalent Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

ADDITIONAL ELIGIBILITY QUALIFICATIONS Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable) Basic Computing Skills in Outlook, Excel & Word Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. Knowledgeable in energy management systems, techniques and operations. Thorough knowledge in all building systems operations, maintenance and repair.

May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
Involves movement between departments, floors, and properties to facilitate work
Ability to speak clearly so others can understand you
Ability to read and understand information presented orally and in writing
Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

AAP/EEO STATEMENT C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

OTHER DUTIES This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Operating Engineer is responsible for the operation, maintenance, and repair of a variety of physical plant systems. In conjunction with the Venue Operations team, the Engineer shall be responsible for the planning, assigning, and performance of physical plant operations. Initiative and independent judgment are expected in the performance of all routine operations, but unusual operating problems or matters involving departmental policy are subject to administrative oversight and review. This is a full-time position with a regular work shift of 3:00pm-11:00pm. If not already a member, the Operating Engineer will be required to apply for membership in I.U.O.E. Local 95.

Education: High school or technical school diploma preferred. Engineers are required to comply with the minimum educational requirements listed in the collective bargaining agreement between I.U.O.E. Local 95 and the Pittsburgh Cultural Trust.

Work Experience: Minimum 3 years' experience as a building/operating engineer. Experience in at least one specialty (HVAC, Carpentry, Plumbing, Electrical) highly preferred. For this position, a strong plumbing background is particularly helpful.

Supervisory Experience: No supervisory experience required.

Technical Skills: Strong skills in budgeting, scheduling and competitive purchasing required. Must have a thorough working knowledge of all applicable codes and regulations governing facilities in the City of Pittsburgh. Outstanding working knowledge of all major building systems including, but not limited to, electrical, plumbing, HVAC, hydraulics, pneumatics, and elevators. Working knowledge of life safety systems including alarms, sensing and detecting devices, emergency egress components, and suppression systems required.

Intangibles: Effective written and verbal communication, computer proficiency, and the ability to track project timelines and expenditures with strong attention to detail is a must. The ideal candidate will also possess effective leadership skills while maintaining a calm demeanor and true sense of diplomacy.

Main job responsibilities:

• Plan and conduct and/or assign and supervise the work of other engineers, apprentices, and skilled and semi-skilled workers in the repair and maintenance of all mechanical and related equipment in facilities to which assigned.
• Develop and institute standard operating procedures, working schedules, preventive maintenance programs, recordkeeping, and reporting systems for facilities assigned.
• Participate in the on-going evaluation, development, and implementation of building safety guidelines and procedures, and enforce the building's policies and procedures for the control of hazardous energy sources.
• Participate in the planning and supervision of on-going renovation and construction projects.
• Conduct or assign regular inspections of physical plant and pre-performance and building shutdown checks.
• Demonstrate a commitment to diversity, equity, accessibility, and inclusion through continuous development, modeling inclusive behaviors, and proactively managing bias.
• Perform other responsibilities as assigned.

Supervisory responsibility: The Operating Engineer does not supervise other Trust employees. However, this individual will often supervise work performed by outside contractors and vendors.

Decision-making responsibility: This position has discretion regarding day-to-day maintenance and repair decisions within Trust venues.

Budgetary responsibility: This position works in conjunction with the Director of Facilities and Grounds to manage maintenance and repair budgets on a project basis.

Strategic responsibility: The Operating Engineer does not have significant strategic responsibility.

Reporting requirements: This individual reports to the Operations team regarding regular and project-based maintenance and upgrade work.

Travel requirements: This position requires limited (less than 5%) travel.

Physical demands: This position frequently requires walking and/or standing for extended periods of time as well as frequently climbing stairs/ladders. This position involves some office work, but also requires physical strength to lift up to 50 lbs. This individual must be comfortable working at heights in excess of one hundred feet and in confined spaces.

Starting Salary Rate: $41.59/hour

The Pittsburgh Cultural Trust is an equal opportunity employer. All applicants are considered for employment without attention to race, color, age, religion, sex, sexual orientation, gender identity, national origin, ethnicity, veteran, or disability status. Employees are expected to be able to perform the essential duties and responsibilities of this position, with or without job modification/reasonable accommodation. If an employee believes a job modification/reasonable accommodation is needed, please contact Human Resources so that a review can be conducted. The Pittsburgh Cultural Trust strives to comply with the accommodation provisions of the Americans with Disabilities Act, Title VII of the Civil Rights Act, the Pregnant Workers Fairness Act, and other related federal, state, and local laws.

Responsible to ensure the efficient operation and maintenance of mechanical, electrical, and plumbing equipment and systems for the assigned property. Responsibilities include maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Essential Functions and Responsibilities:

• Perform all plumbing, electrical, or HVAC requirements of the building.
• Maintain heating equipment, chillers, DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings.
• Verify field conditions and perform any necessary repairs or adjustments.
• Monitor Energy Management.
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments, and installations about the property.
• Perform repairs to plumbing fixtures.
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations, and industry best practices.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps.
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits.
• Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management.
• Document and report activities to supervisor.
• Respond immediately to emergency situations and customer concerns.
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits.
• Complete all required C&W Safety Training as scheduled annually.
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours.

Key Competencies:

• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency

Important Education:

• High School Diploma or GED Equivalent
• Graduate of apprentice program or trade school preferred

Important Experience:

• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

Additional Eligibility Qualifications:

• Appropriate license/permit for trade as may be required
• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
• Possess and maintain a valid driver's license and good driving record with periodic checks
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance, and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques, and operations.
• Thorough knowledge in all building systems operations, maintenance, and repair.

Work Environment:

• This job operates in a professional office environment.
• This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines.
• Regularly required to travel outside between properties in varying weather conditions.

Physical Demands:

• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices.
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine.
• Involves movement between departments, floors, and properties to facilitate work.
• Ability to speak clearly so others can understand you.
• Ability to read and understand information presented orally and in writing.
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics.

AAP/EEO Statement:

C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

Other Duties:

This job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

Under general direction of the Director/Manager of Plant Operations, or their liaison, shift operator, who is responsible for operation, maintenance, installation and replacement of utility production and distribution systems. Items such as chillers, HVAC, boilers, electrical distribution, medical gas, fire protection, pneumatic/DDC controls, Energy Management, water chemical treatment, etc., in a safe, effective, and efficient manner in response to or in support of customer needs. Responsible for installing and maintaining dust barrier when performing job duties. Must fill out completed work orders and/or daily time sheets and turn them in daily. Monitors and maintains required supplies and tools in a neat and orderly fashion insuring that proper inventory is maintained, tools are functioning properly and readily accessible and that the work/production areas are in a clean and neat manner as evidenced by management or regulatory observation. Notify management of needed supplies in a timely manner by filling out material request forms.

• Responsible for responding to house calls in a timely manner.

• Responsible for completion of operational logs, reports, corrective and preventative work orders

• Responsible for handling off-hours shift and weekend calls by contacting necessary hospital staff, coordinating with hospital personnel or by contacting outside service companies.

• Monitoring hospital equipmentmaking and logging necessary adjustments.

• Assist/supervise contractors as necessary when making repairs or working in building.

• Pay starting at $27.96 per hour.

Required

• High School Diploma or equivalent

• 5 years of relevant experience 5 to 7 years of documented work experience in the operation, maintenance and repair of chillers and boilers in a 400,000 sq ft commercial, industrial, institutional facility where the chiller plant capacity is 2,000 tons or greater and with a boiler plant of 40,000 lbs./hr. steam capacity

OR

• Meet the requirement set forth by City of Dearborn (High Pressure Boiler Code of Ordinance for the 1st class Stationary Engineer.)

As a team member at Corewell Health, you will play an essential role in delivering personalized health care to our patients, members and our communities. We are committed to cultivating and investing in YOU. Our top-notch teams are comprised of collaborators, leaders and innovators that continue to build on one shared mission statement - to improve health, instill humanity and inspire hope. Join a nationally recognized health system with an ambitious vision of continued advancement and excellence.

• Comprehensive benefits package to meet your financial, health, and work/life balance goals.

• On-demand pay program powered by Payactiv

• Discounts directory with deals on the things that matter to you, like restaurants, phone plans, spas, and more!

• Optional identity theft protection, home and auto insurance, pet insurance

• Traditional and Roth retirement options with service contribution and match savings

Primary Location

SITE - Dearborn Hospital - 18101 Oakwood Blvd - Dearborn

Department Name

Facilities Management - Facilities - Dearborn

Employment Type

Full time

Shift

Night (United States of America)

Weekly Scheduled Hours

40

Hours of Work

12 a.m. to 8 a.m.

Days Worked

Monday to Friday

Weekend Frequency

N/A

CURRENT COREWELL HEALTH TEAM MEMBERS Please apply through Find Jobs from your Workday team member account. This career site is for Non-Corewell Health team members only.

Corewell Health is committed to providing a safe environment for our team members, patients, visitors, and community. We require a drug-free workplace and require team members to comply with the MMR, Varicella, Tdap, and Influenza vaccine requirement if in an on-site or hybrid workplace category. We are committed to supporting prospective team members who require reasonable accommodations to participate in the job application process, to perform the essential functions of a job, or to enjoy equal benefits and privileges of employment due to a disability, pregnancy, or sincerely held religious belief.

Corewell Health grants equal employment opportunity to all qualified persons without regard to race, color, national origin, sex, disability, age, religion, genetic information, marital status, height, weight, gender, pregnancy, sexual orientation, gender identity or expression, veteran status, or any other legally protected category.

An interconnected, collaborative culture where all are encouraged to bring their whole selves to work, is vital to the health of our organization. As a health system, we advocate for equity as we care for our patients, our communities, and each other. From workshops that develop cultural intelligence, to our inclusion resource groups for people to find community and empowerment at work, we are dedicated to ongoing resources that advance our values of diversity, equity, and inclusion in all that we do. We invite those that share in our commitment to join our team.

You may request assistance in completing the application process by calling .

Responsible to ensure the efficient operation and maintenance of mechanical, electrical, and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Perform all plumbing, electrical, or HVAC requirements of the building(s) Maintain heating equipment, chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings Verify field conditions and perform any necessary repairs or adjustments Monitor Energy Management Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management Document and report activities to supervisor Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits Complete all required C&W Safety Training as scheduled annually Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

KEY COMPETENCIES Technical Proficiency Initiative Flexibility Multi-Tasking Sense of Urgency

IMPORTANT EDUCATION High School Diploma or GED Equivalent Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

ADDITIONAL ELIGIBILITY QUALIFICATIONS Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable) Basic Computing Skills in Outlook, Excel & Word Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc. Knowledgeable in energy management systems, techniques and operations. Thorough knowledge in all building systems operations, maintenance and repair.

May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties

WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and properties to facilitate work Ability to speak clearly so others can understand you Ability to read and understand information presented orally and in writing Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

AAP/EEO STATEMENT C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

OTHER DUTIES This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.

Essential Functions and Responsibilities:

• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

Key Competencies:

• Technical Proficiency
• Initiative
• Flexibility
• Multi-Tasking
• Sense of Urgency

Important Education:

• High School Diploma or GED Equivalent
• Graduate of apprentice program or trade school preferred

Important Experience:

• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting

Additional Eligibility Qualifications:

• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
• Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations.
• Thorough knowledge in all building systems operations, maintenance and repair.

Work Environment:

This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.

Physical Demands:

• Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
• Involves movement between departments, floors, and properties to facilitate work
• Ability to speak clearly so others can understand you
• Ability to read and understand information presented orally and in writing
• Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics

AAP/EEO Statement:

C&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.

Other Duties:

This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.