113 Schneider Electric jobs in North Andover
Senior Electrical Engineer - Control Systems
Posted today
Job Viewed
Job Description
2025-05-13
**Country:**
United States of America
**Location:**
MA131: Tewksbury, MA Bldg
1 Assabet 50 Apple Hill Drive Assabet - Building 1, Tewksbury, MA, 01876 USA
**Position Role Type:**
Onsite
**U.S. Citizen, U.S. Person, or Immigration Status Requirements:**
The ability to obtain and maintain a U.S. government issued security clearance is required?
U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
**Security Clearance:**
DoD Clearance: Secret
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Control Systems section within the Sensor Power and Analog Department (SPAD) has an exciting employment opportunity for a Senior Engineer with control system and power conversion experience.
SPAD is responsible for design engineering including the following areas:
+ Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators
+ Power Conversion - AC/DC, DC/DC and DC/AC, Linear and Switching Supplies, Power Factor Correction (PFC), Zero Voltage Switching (ZVS), Resonant Circuits, Synchronization, Noise Controls
+ Power Distribution - Ground, Air, Shipboard, and Space, Power Generation, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems
+ Power Sub-System Design - Filters, Harmonic Control, EMI, Circuit Simulation, Magnetics, Protective Relay Systems, Short Circuit and Stress Analyses
+ Control Systems - Servo Control Systems, Motor/Power/Process Control, Digital Feedback Systems, Command Generation, Inertial Stabilization, Navigation Algorithms
This position is an onsite role. Regular travel to Tewksbury, MA; Marlborough, MA; Andover, MA; Woburn, MA; and/or Pelham, NH may be required depending on the assignment. Travel to supplier or customer sites may also be required (up to 10%).
**What you will do:**
In this role you will select power conversion equipment (rectifiers, inverters, filters, etc.) and tune control loops (current, velocity, position, etc.) for integrated electromechanical solutions. The applications range from cooling subsystems (fans, pumps, flow control valves, etc.) to actuators for motion control of radar elements. You will also be responsible for creating and validating simulation models to evaluate system performance and troubleshoot real-system problems.
You will also be responsible for supporting and driving the execution of product development projects. You will be working with a Team/Technical Lead and under the guidance of an Integrated Product Team (IPT) Lead. Work is performed in a multidisciplinary team environment focused on execution and engineering excellence, using established business, and engineering tools and processes. You will interact with internal and external customers and leadership team members.
**Qualifications you must have:**
+ B.S. degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major.
+ 5+ years of experience in power conversion and/or control system design
+ Experience with at least one of the following: traction systems, servo systems, fan / pump applications, or grid-tied bidirectional converters
+ Experience with high voltage systems at kW power levels
+ Experience in system modeling or design using MATLAB/Simulink or equivalent
**Qualifications we prefer:**
+ M.S. degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major.
+ Understanding of classic control theory and vector control of electric motors
+ Hands-on experience with power electronics inverters used as motor drives
+ Familiarity with induction and permanent magnet electric machines.
+ Prior experience as engineering Team Lead (hardware, electrical or integration)
+ Ability to create system models capturing implementation-specific characteristics such as propagation delays, quantization, sensor non-linearities, etc.
+ Existing US DoD security clearance
**What We Offer**
+ Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
+ Relocation Eligibility
**Learn More & Apply Now!**
+ Please consider the following role type definition as you apply for this role.
+ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
_RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._
**Privacy Policy and Terms:**
Click on this link ( to read the Policy and Terms
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Senior FPGA Control Systems Engineer
Posted today
Job Viewed
Job Description
General Atomics Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS' expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide.
We have an exciting opportunity for an Electrical Engineer (EE) or Computer Engineer (CE) to join our Optical Sensors Systems team located in Acton, Massachusetts. We are looking for someone with drive, talent, and experience in Embedded Firmware Design, Hardware Description Language, and Embedded Image Processing who also thrives in a fast-paced, environment. The successful candidate will report to the Optical Sensors Systems Engineering Manager and, alongside high-caliber staff, will be engaged in the engineering support and new development of embedded space-based image processing and a variety of other technologies in the expanding product portfolio of GA-EMS.
**DUTIES AND RESPONSIBILITIES:**
+ Work with GA-EMS Engineering staff and chief engineers in the concept development and prototype design, integration, and test of space-based imaging systems for all product lines and technology areas. These encompass advanced imaging sensors and detectors, real-time image processing, target detection and tracking, signal/image processing, test equipment development, and instrumentation.
+ With limited direction, exercise considerable latitude for initiating and developing designs, techniques, and solutions to resolving advanced technical engineering problems.
+ Demonstrate prior experience in the improvement of legacy systems and development of new systems.
+ Lead firmware development projects, guiding less experienced staff and ensuring technical milestones are met, give technical presentations, and manage technical effort schedules.
+ May function in a leadership role for a project and provide direction and guidance to less experienced professional staff or team of professional staff in technical efforts involving development projects in any product area.
+ Formulate plans and coordinate solutions development and deployment including documentation, reporting, publishing, and making technical and other presentations to ensure viability of the solutions in an evolving environment.
+ Communicate with colleagues and management throughout solution development and deployment cycles.
+ Act as the primary technical contact for firmware-related aspects of imaging projects.
+ Ability to support advanced IRAD and proposal efforts
+ May represent the organization as a prime technical contact on projects.
+ Perform other duties as assigned or required.
We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.
49742
**Job Qualifications:**
+ Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent engineering experience in lieu of education
+ Ability to obtain and maintain a DoD Security Clearance is required.
+ Required experience designing and implementing real-time imaging algorithms on FPGAs for optical systems including interfacing with detectors, image processers, and high-speed data transfers.
+ Required experience performing simulation, validation, and hardware-in-the-loop testing of FPGA-based control systems.
+ Develop HDL (VHDL or Verilog) and embedded C/C++ firmware using tools such as Xilinx Vivado and Vitis.
+ Perform simulation, validation, and hardware-in-the-loop testing of FPGA-based control systems.
+ Integrate systems with sensors, actuators, and optical components.
+ Optimize signal processing pipelines for low-latency, high-precision performance.
+ Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving project environment.
+ Strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals.
+ Capable of representing the organization as a prime technical contact.
+ Customer-focused and able to formulate plans based on the development of innovative new designs in resolving complex technical engineering problems.
+ Must be able to work on a self-initiated basis or in a team environment.
+ Must be able to prepare and conduct detailed technical presentations and reviews.
+ Some travel and extended work schedules may be required.
+ The submission of a cover letter with resume is desired.
**Salary:** $128,130 - $229,358 **Travel Percentage Required** 0 - 25 **Relocation Assistance Provided** Provided **US Citizenship Required?** Yes **Clearance Required?** Desired **Clearance Level** Senior (8+ years) **Workstyle** Onsite
General Atomics is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and will consider all qualified applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. To learn more visit Notices.pdf. U.S. Citizenship is required for certain positions.
Cyber Security & Control Systems Storage & Virtual Engineer
Posted today
Job Viewed
Job Description
Please note that this position is contingent upon the successful award of a contract currently under bid.
Nisga'a CIOPS provides hands-on experienced services to civilian and DoD programs worldwide. Delivering highly skilled, cleared personnel who provide services on five continents for a portfolio of customers.
Summary:
The Cyber Security & Control Systems (CSCS) Storage & Virtual (S&V) Program Engineer is an on-site position located at Hanscom AFB, MA. The CSCS S&V Program supports the Server Consolidation Environment (SCE) and Air Force Provisional Enterprise Data Center (AFPEDC) programs. This role includes the testing, implementation and sustainment of solutions, ensuring system performance, and applying industry-standard concepts, practices, and procedures. This position will work closely with appropriate teams and will act as a liaison for AFLCMC/HNI.
The primary role for this position is to support the AFPEDC system located in the Hanscom Integration and Test Facility (ITF). The equipment in ITF is similar to the production environment and is primarily used for development and verification of Time Compliance Technical Orders (TCTO) and other changes necessary to incorporate into AFPEDC production. The CSCS S&V architect will provide on-site and remote engineering and integration services for the architecture and integration of products to include system architecture, solution design, performance audits, system reviews, documentation and data migration. Other duties include performing site audits and technical account management such as managing third parties, providing technical assistance and mentoring as directed by the PMO, as well as providing cybersecurity recommendations in support of ATO within the RMF system.
Responsibilities
Essential Job Functions:
- Core Tasks
- Provide integration of new applications to include coordinating design reviews, providing List of Materials for expansion requirements and coordinating integration activities with the application team or application integration contractor
- Provide documentation of as-built drawing changes to the system
- Perform system expansion or contraction planning activities
- Support the PMO in on-boarding of new applications as required
- Support the PMO by migrating existing SCE/ AFPEDC applications to other platforms as required
- Provide VMware engineering design and architecture support for Data Center Consolidation of existing virtual data center locations
- Provide Cisco UCS engineering design and architectural support
- Provide SAN engineering design and architecture support
- Provide Commvault engineering design and architecture support
- Provide IA assessment and remediation
- Perform daily/ weekly monitoring of system performance
- Determine resolution of deployment problems in the production environment
- Provide reviews of contractor submittals of System Design and Architecture Reports and Tech Order
- Evaluate existing SCE/ AFPEDC architecture and site-specific data center services to determine change requirements at each location
- Support PMO in all aspects of the creation and incorporation of SCE/ AFPEDC architecture and design best practices
- Generate and test TCTOs to implement changes at all SCE/ AFPEDC sites
- Travel to other locations estimated at two (2) Continental United States trips per year - other travel requirements may be necessary
- Provide troubleshooting, configuration, and management support for systems and technical environments as necessary
- Risk & Compliance Management
- Ensure compliance with DoD, Air Force, and industry security standards.
- Maintain operational readiness in accordance with procedures and policies.
- Assist in conducting risk assessments and applying mitigation strategies.
Necessary Skills and Knowledge:
- Excellent leader with experience in managing staff of different disciplines to produce results in a timely manner.
- Excellent communication skills.
- Excellent problem-solving skills.
- Strong technical knowledge of network and systems infrastructure.
- Ability to work both independently and collaboratively in a mission-critical environment.
- Experience managing subcontractors, vendors, and technical personnel.
- Familiarity with U.S. DoD & U.S. Air Force procedures and the Air Force Information Network (AFIN).
- A degree in a related field and a minimum of seven (7) years of relevant experience or a total of at least ten (10) years of relevant experience
- Enterprise storage experience in integration and migration of SAN and NAS technologies.
- Experience supporting DoD Information Network, AFIN or equivalent.
- Information Assurance (IA) Technician (IAT) Level II Certification
- A valid and current SECRET (or higher) security clearance.
- Must have two or more of the following:
- Dell/EMC Storage Area Networks and Backup storage and VMware virtualization
- Commvault Simpana and EMC Data Domain software
- Experience with Brocade Fabric switching
- NCIE NetApp Certified Implementation Engineer-SAN Specialist or equivalent
- Eight (8) years of experience with Microsoft Server
- CyberArk Level 2: Defender Certification
- Cisco Certified Design Associate (CCDA) with experience in Routers, Switches and Network Fabric or equivalent
- Cisco UCS Compute and Networking experience in a virtual environment
- Cisco Certified Technician (CCT) Data Center
- Network+
Pay and Benefits
At Goldbelt, we value and reward our team's dedication and hard work. We provide a competitive base salary commensurate with your qualifications and experience. As an employee, you'll enjoy a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k) plan with company matching, tax-deferred savings options, supplementary benefits, paid time off, and professional development opportunities.
Cyber Security & Control Systems Storage & Virtual Engineer
Posted 10 days ago
Job Viewed
Job Description
Overview
Please note that this position is contingent upon the successful award of a contract currently under bid.
Nisga'a CIOPS provides hands-on experienced services to civilian and DoD programs worldwide. Delivering highly skilled, cleared personnel who provide services on five continents for a portfolio of customers.
Summary:
The Cyber Security & Control Systems (CSCS) Storage & Virtual (S&V) Program Engineer is an on-site position located at Hanscom AFB, MA. The CSCS S&V Program supports the Server Consolidation Environment (SCE) and Air Force Provisional Enterprise Data Center (AFPEDC) programs. This role includes the testing, implementation and sustainment of solutions, ensuring system performance, and applying industry-standard concepts, practices, and procedures. This position will work closely with appropriate teams and will act as a liaison for AFLCMC/HNI.
The primary role for this position is to support the AFPEDC system located in the Hanscom Integration and Test Facility (ITF). The equipment in ITF is similar to the production environment and is primarily used for development and verification of Time Compliance Technical Orders (TCTO) and other changes necessary to incorporate into AFPEDC production. The CSCS S&V architect will provide on-site and remote engineering and integration services for the architecture and integration of products to include system architecture, solution design, performance audits, system reviews, documentation and data migration. Other duties include performing site audits and technical account management such as managing third parties, providing technical assistance and mentoring as directed by the PMO, as well as providing cybersecurity recommendations in support of ATO within the RMF system.
Responsibilities
Essential Job Functions:
- Core Tasks
- Provide integration of new applications to include coordinating design reviews, providing List of Materials for expansion requirements and coordinating integration activities with the application team or application integration contractor
- Provide documentation of as-built drawing changes to the system
- Perform system expansion or contraction planning activities
- Support the PMO in on-boarding of new applications as required
- Support the PMO by migrating existing SCE/ AFPEDC applications to other platforms as required
- Provide VMware engineering design and architecture support for Data Center Consolidation of existing virtual data center locations
- Provide Cisco UCS engineering design and architectural support
- Provide SAN engineering design and architecture support
- Provide Commvault engineering design and architecture support
- Provide IA assessment and remediation
- Perform daily/ weekly monitoring of system performance
- Determine resolution of deployment problems in the production environment
- Provide reviews of contractor submittals of System Design and Architecture Reports and Tech Order
- Evaluate existing SCE/ AFPEDC architecture and site-specific data center services to determine change requirements at each location
- Support PMO in all aspects of the creation and incorporation of SCE/ AFPEDC architecture and design best practices
- Generate and test TCTOs to implement changes at all SCE/ AFPEDC sites
- Travel to other locations estimated at two (2) Continental United States trips per year - other travel requirements may be necessary
- Provide troubleshooting, configuration, and management support for systems and technical environments as necessary
- Risk & Compliance Management
- Ensure compliance with DoD, Air Force, and industry security standards.
- Maintain operational readiness in accordance with procedures and policies.
- Assist in conducting risk assessments and applying mitigation strategies.
Necessary Skills and Knowledge:
- Excellent leader with experience in managing staff of different disciplines to produce results in a timely manner.
- Excellent communication skills.
- Excellent problem-solving skills.
- Strong technical knowledge of network and systems infrastructure.
- Ability to work both independently and collaboratively in a mission-critical environment.
- Experience managing subcontractors, vendors, and technical personnel.
- Familiarity with U.S. DoD & U.S. Air Force procedures and the Air Force Information Network (AFIN).
- A degree in a related field and a minimum of seven (7) years of relevant experience or a total of at least ten (10) years of relevant experience
- Enterprise storage experience in integration and migration of SAN and NAS technologies.
- Experience supporting DoD Information Network, AFIN or equivalent.
- Information Assurance (IA) Technician (IAT) Level II Certification
- A valid and current SECRET (or higher) security clearance.
- Must have two or more of the following:
- Dell/EMC Storage Area Networks and Backup storage and VMware virtualization
- Commvault Simpana and EMC Data Domain software
- Experience with Brocade Fabric switching
- NCIE NetApp Certified Implementation Engineer-SAN Specialist or equivalent
- Eight (8) years of experience with Microsoft Server
- CyberArk Level 2: Defender Certification
- Cisco Certified Design Associate (CCDA) with experience in Routers, Switches and Network Fabric or equivalent
- Cisco UCS Compute and Networking experience in a virtual environment
- Cisco Certified Technician (CCT) Data Center
- Network+
Pay and Benefits
At Goldbelt, we value and reward our team's dedication and hard work. We provide a competitive base salary commensurate with your qualifications and experience. As an employee, you'll enjoy a comprehensive benefits package, including medical, dental, and vision insurance, a 401(k) plan with company matching, tax-deferred savings options, supplementary benefits, paid time off, and professional development opportunities.
Quality Systems Document Control Specialist
Posted 14 days ago
Job Viewed
Job Description
A growing pharmaceutical company with an exciting pipeline of therapies for neurological disorders is seeking a add a Quality Systems Document Control Specialist (contract to hire). Our client is in the process of building the Quality function to support late-stage clinical development programs is and preparing for commercialization. This position will be a key contributor to managing and improving the Document Management and Records Management Systems. This is a contract to hire position out of Boston, MA.
QUALIFICATIONS:
- Bachelor's degree with at least 5 years of experience in a quality role, preferably within a broader quality organization supporting both development and commercial programs.
- Previous experience with implementing and maintaining electronic systems (e.g., Veeva, Compliance Wire, Master Control etc.)
- Previous experience with analytics for use in managing quality issues enabling a risk-based approach.
- Must be able to demonstrate strategic thinking, excellent organizational skills and be able to drive project teams forward while having a willingness to do hands on work to achieve goals.
- Proven ability to work independently and collaboratively as part of a multidisciplinary team.
- Proficient negotiation and conflict resolution skills.
- Ability to travel if needed (less than 10%)
RESPONSIBILITIES:
- Manages initiation, processing, routing distribution and achieving controlled documentation.
- Serve as the subject matter expert for the electronic document management system (eDMS) ensuring Controlled Documents are processed in accordance with SOPs including creation, revision, approval, and obsolescence.
- Collaborates closely with FALs within Development to determine document needs, establish, and improve necessary document templates, and provide guidance on project needs and maintain compliance with good documentation practices and GxP data integrity requirements.
- Partners with functional areas to conduct periodic review of existing GxP procedures.
- Manage delivery, maintenance, and continuous improvement of GxP processes in eDMS
- Oversees Document Control and GxP records management. Ensures adequate systems are in place to achieve and maintain records retention compliance pursuant to policies and regulatory requirements.
- Report data related to the health of the DMS to Senior Executive Team via the Quality Management Review.
- Own and facilitate the SOP Review Committee
- Manage the development and implementation of controlled documents including, but not limited to: SOPs, Work Instructions, training materials, protocols, reports, templates, and reference guides
- Ensure internal formatting standards are maintained
- Champion the execution of QS activities within document control within the QA department as well as cross functionally.
- Support computer systems validation and assist with the management of electronic document management systems.
- Provide high levels of support for the enterprise as it relates to achieving documentation deliverables
- Participate in regulatory inspections and/or internal audits.
- Establish and manage effective cross-functional team communications and advise on strategy and implementation of quality principles as well as regulatory requirements while remaining independent.
- Build and maintain relationships with other departments and establish a culture of engagement and transparency with Quality
Equal Opportunity Employer: We are proud to be an equal opportunity employer. We welcome and encourage applications from all qualified candidates regardless of race, sex, gender identity or expression, disability, age, religion or belief, sexual orientation, or any other characteristic protected by applicable laws and regulations. It is our policy not to discriminate against any applicant or employee, and we are committed to fostering a diverse, inclusive, and respectful work environment across all locations in which we operate. We believe that diversity, equity, and inclusion are fundamental to our mission and enhance our ability to serve clients globally. If you have a disability or require any reasonable accommodations during the application or interview process, please inform your recruiter or contact us directly so that we can explore the appropriate arrangements.
Fraud Alert: Candidate safety is a top priority at Planet Pharma. The industry has seen an increase in people falsely representing themselves as recruiters to gather personal information from job seekers. For your safety, do not provide sensitive data to anyone you have not spoken with thoroughly, never provide banking information during the application process and always double check the email address of the Recruiter to ensure it's from an official Planet Pharma domain (@planet-pharma.com, @planet-pharma.co.uk, and @ppgadvisorypartners.com) and not a domain with an alternative extension like .net, .org or .jobs.
Automation Engineer
Posted today
Job Viewed
Job Description
Automation Engineer
**Job Description Summary**
**Job Description**
**Our Purpose:**
At C&W Services, we live by the belief that "Better Never Settles." We're dedicated to creating a positive impact globally and we're looking for talented individuals to join our team.
**C&W Services provides compelling benefits, including:**
+ Weekly pay
+ Comprehensive benefits starting on your first day
+ Training, development, and advancement opportunities
+ A clean and cutting-edge facility
+ A safety-first culture
**About the Role:**
As an Automation Engineer (AE), you will support the site maintenance team to ensure operational performance and efficiency of Material Handling Equipment (MHE) control systems. You will partner with the maintenance team to troubleshoot and maintain equipment such as conveyors, sortation systems, scanners, cameras, print-and-apply labeling systems, scales, HMI systems, control cabinets, and more. The AE provides support to the operations and maintenance teams by implementing solutions for complex problems and tracking related projects. You may lead and/or assist other technicians with their development through continuity of knowledge, all while working in a clean, climate-controlled, modern facility.
**Responsibilities include, but are not limited to:**
+ Promoting a safe working environment by following all safety procedures
+ Providing guidance on maintaining material handling control systems, industrial motor control systems, servo and frequency drives, and electrical distribution systems
+ Using your technical expertise to provide support with troubleshooting and modifying software projects for material handling control systems, including PLC/PC controllers, Allen Bradley ControlLogix and CompactLogix PLC platform utilizing Rockwell's software package, industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.
+ Acting as the first level of escalation support for equipment automation issues and appropriately escalating downtime situations to vendors and/or network support teams to restore equipment operation.
+ Applying subject matter expertise in material handling and electronic control systems to maximize building utilization of systems
+ Monitoring MHE metrics and partnering with mechatronics technicians to resolve equipment electrical problems that create performance deficiencies, and performing control systems assessments to maintain and improve equipment reliability
+ Partnering with facility Operations leadership, equipment vendors, and parts suppliers to plan and coordinate new technology installations, acting as the technical consultant for capital projects inside the building
+ Communicating technical issues and project timelines with building leadership, operations, and the maintenance team, explaining production impacts and working closely with operations and engineering to ensure a thorough understanding of impact to systems
**Basic Qualifications:**
+ 3+ years of cumulative work experience in the following areas, or a relevant 2-year degree plus 1 year of work experience in the following areas:
+ Programming/commissioning of HMIs, PLCs, and VFDs
+ SCADA systems and KPIs
+ Interpreting and modifying mechanical and electrical drawings
+ Supporting a range of different conveyors and sortation systems
+ Equipment control components such as relays, motor starters, VFDs, HMIs, etc.
+ High school or equivalent diploma
+ Positive attitude and ability to effectively problem-solve
**Preferred Qualifications:**
+ Associate's degree with a focus in Electronic Technology (or similar)
+ Bachelor's degree in a STEM-related field
+ 4+ years of experience in the electrical field, or in control systems development, troubleshooting, and programming
+ 4+ years of experience supporting advanced automation controls systems maintenance and development
+ 3+ years of experience supporting a wide range of conveyors and sortation systems
+ Leadership and project management experience
**Physical Demands:**
+ Ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment
+ Ability to perform tasks while wearing required Personal Protective Equipment (PPE), which may include but is not limited to hard hat, face mask, face shield, and composite-toe shoes
+ Regularly required to crouch or bend and reach to install/move equipment
+ Movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day
+ Work in a warehouse environment with fluctuating temperatures
+ Regularly required to type on a computer for 1-2 hours per day
**Why C&W Services?**
We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect.
**What's Next?**
Ready to take the next steps in your career? Apply today and be part of a team that is making a difference!
C&W Services is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at **1- ** or email ** ** . Please refer to the job title and job location when you contact us.
INCO: "C&W Services"
CI Automation Engineer
Posted 5 days ago
Job Viewed
Job Description
Apply now: CI Automation, location is Hybrid. The start date is Jun 2, 2025 for this 12-month contract position.
Job Title: CI Automation
Location-Type: Hybrid, 3 days On-site (Boston, MA)
Start Date Is: Jun 2, 2025
Duration: 12-month contract
Compensation Range: $70-80/hr
Job Description:
Support the client's network automation initiatives through the design, development, and implementation of CI pipelines and automation solutions.
Day-to-Day Responsibilities:
- Design and implement CI automation workflows
- Write and maintain scripts using Python, Perl, Shell, and SQL
- Integrate APIs and manage data exchange using REST, XML, or NETCONF
- Utilize automation tools like Ansible, Chef, or Puppet
- Support and enhance network automation tools like Netmiko, Napalm, or Nornir
- Work with DCIM tools such as Netbox or Nautobot
- Collaborate with DevOps and infrastructure teams
- Maintain documentation and ensure compliance with best practices
Requirements:
Must-Haves:
- Proficiency in Python, Perl, Shell, and SQL
- Experience with automation frameworks (Ansible, Chef, Puppet)
- Familiarity with network automation tools (Netmiko, Napalm, Nornir)
- Strong communication, analytical, and problem-solving skills
- Ability to prioritize tasks in a fast-paced environment
- Certification in Automation
- Experience with DevOps methodologies
- Knowledge of REST APIs, XML, NETCONF
- Experience with DCIM tools like Netbox or Nautobot
- Strong project planning and implementation skills
Be The First To Know
About the latest Schneider electric Jobs in North Andover !
Test Automation Engineer
Posted 6 days ago
Job Viewed
Job Description
Immediate need for a talented Test Automation Engineer. This is a 12+ months contract opportunity with long-term potential and is located in Merrimack NH (Hybrid). Please review the job description below and contact me ASAP if you are interested.
Job ID: 25-78153
Pay Range: $67 - $70/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).
Key Responsibilities:
- Ability to communicate and drive business requirements and solutions
- Ability to handle multiple simultaneous tasks, showing experienced skills in Analytical &Problem-solving skills
- You have a Strong Automation background and passionate about Quality Engineering in general.
- Ability to handle complex applications and break down complex problems into simpler patterns.
- You are a strong contributor and proactive with a reciprocal work style
- You have an ability to establish and maintain trusted relationships with business partners and technology
- You have a desire and aptitude for learning new technologies
Key Requirements and Technology Experience:
- Key skills; API Testing
- Cucumber
- SQL
- Expert (8+ years' experience) working on API testing preferably cucumber based or equivalent test automation frameworks
- Bachelor's degree (or above) in either Computer Science, Management Information Systems, Business Information Systems, Mathematics or Finance related field
- Expert (5+ years' experience) in writing DB Sqls
- Experience testing Financial Services products or components
- Understanding and experience in Asset Management
- Experience in SQL, Restful Web services
- Experience in Continuous Integration and Continuous delivery (CI/CD) patterns using cloud infrastructure.
- Experience with Agile and Continuous Integration & Continuous Delivery (CI/CD) practices.
- Any Agile scrum master experience will be considered as a plus.
Our client is a leading Financial Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.
Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
#cha
QA Automation Engineer
Posted 7 days ago
Job Viewed
Job Description
Your Future Evolves Here
Evolent partners with health plans and providers to achieve better outcomes for people with most complex and costly health conditions. Working across specialties and primary care, we seek to connect the pieces of fragmented health care system and ensure people get the same level of care and compassion we would want for our loved ones.
Evolent employees enjoy work/life balance, the flexibility to suit their work to their lives, and autonomy they need to get things done. We believe that people do their best work when they're supported to live their best lives, and when they feel welcome to bring their whole selves to work. That's one reason why diversity and inclusion are core to our business.
Join Evolent for the mission. Stay for the culture.
What You'll Be Doing:
Key Responsibilities:
-
Design, develop, and maintain automated test scripts using Karate DSL , JavaScript, and other relevant tools.
-
Build robust data validation frameworks using SQL , Python and other relevant tools.
-
Collaborate with developers, business analysts, and stakeholders to understand requirements and translate them into test cases.
-
Perform functional , integration , and regression testing for APIs, databases, and UI components.
-
Configure and customize test environments to align with client-specific needs.
-
Integrate automated tests into CI/CD pipelines to support continuous testing.
-
Document test plans, test cases, and test results clearly and comprehensively.
-
Provide post-deployment support and contribute to continuous improvement of QA processes and tools.
Required Qualifications:
-
Bachelor's degree in Computer Science, Software Engineering, or related field.
-
5+ years of experience in QA automation, system integration, or software implementation.
-
Proficiency in Karate Framework , Cucumber , Robot framework or similar automation tools.
-
Experience with test management tools like JIRA , TestRail , or relevant tool.
-
Strong understanding of data mapping , data pipelines , and ETL processes .
-
Experience with scripting/programming languages such as Python , JavaScript , or C# .
-
Familiarity with cloud platforms (Azure preferred), Azure Data Factory , and API testing .
-
Experience with CI/CD pipelines and test automation in DevOps environments .
-
Knowledge of version control tool like Github, TFS.etc
-
Excellent communication, collaboration, and problem-solving skills.
-
Strong organizational skills with the ability to manage multiple priorities.
Preferred Skills:
-
Knowledge of performance testing and security testing tools.
-
Familiarity with Agile/Scrum methodologies .
-
Exposure to data visualization and reporting tools for test metrics and dashboards.
To comply with HIPAA security standards (45 C.F.R. sec. 164.308 (a) (3)), identity verification may be required as part of the application process. This is collected for compliance and security purposes and only reviewed if an applicant advances to the final interview state. Reasonable accommodations are available upon request.
Technical Requirements:
We require that all employees have the following technical capability at their home: High speed internet over 10 Mbps and, specifically for all call center employees, the ability to plug in directly to the home internet router. These at-home technical requirements are subject to change with any scheduled re-opening of our office locations.
Evolent is an equal opportunity employer and considers all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status. If you need reasonable accommodation to access the information provided on this website, please contact for further assistance.
The expected base salary/wage range for this position is $110,000-150,000. This position is also eligible for a bonus component that would be dependent on pre-defined performance factors. As part of our total compensation package, Evolent is proud to offer comprehensive benefits (including health insurance benefits) to qualifying employees. All compensation determinations are based on the skills and experience required for the position and commensurate with experience of selected individuals, which may vary above and below the stated amounts.
Don't see the dream job you are looking for? Drop off your contact information and resume and we will reach out to you if we find the perfect fit!
CI Automation Engineer
Posted 23 days ago
Job Viewed
Job Description
Job DescriptionJob Description
Apply now: CI Automation, location is Hybrid. The start date is Jun 2, 2025 for this 12-month contract position.
Job Title: CI Automation
Location-Type: Hybrid, 3 days On-site (Boston, MA)
Start Date Is: Jun 2, 2025
Duration: 12-month contract
Compensation Range: $70-80/hr
Job Description:
Support the client's network automation initiatives through the design, development, and implementation of CI pipelines and automation solutions.
Day-to-Day Responsibilities:
-
Design and implement CI automation workflows
-
Write and maintain scripts using Python, Perl, Shell, and SQL
-
Integrate APIs and manage data exchange using REST, XML, or NETCONF
-
Utilize automation tools like Ansible, Chef, or Puppet
-
Support and enhance network automation tools like Netmiko, Napalm, or Nornir
-
Work with DCIM tools such as Netbox or Nautobot
-
Collaborate with DevOps and infrastructure teams
-
Maintain documentation and ensure compliance with best practices
Requirements:
Must-Haves:
- Proficiency in Python, Perl, Shell, and SQL
- Experience with automation frameworks (Ansible, Chef, Puppet)
- Familiarity with network automation tools (Netmiko, Napalm, Nornir)
- Strong communication, analytical, and problem-solving skills
- Ability to prioritize tasks in a fast-paced environment
- Certification in Automation
- Experience with DevOps methodologies
- Knowledge of REST APIs, XML, NETCONF
- Experience with DCIM tools like Netbox or Nautobot
- Strong project planning and implementation skills