36 Assembly Line Worker jobs in Willoughby

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.

Location: Euclid - Automation  
Employment Status: Hourly Full-Time  
Function: Engineering  
Pay Range: ($9,624.00  - $ 7,408.00 )
Target Bonus: %
Req ID: 27048  

Purpose

The Automation Assembly Technician is responsible for all phases of robotic cell integration, configuration, and some programming. The role works closely with Engineering, Service, and Applications.

Job Duties Responsibilities

• Responsible for the Electrical and Mechanical assembly, set up, testing, and pack for shipping of all Automation Products. Reports to the Build Floor Supervisor.
• Provides technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development.
• Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems.
• Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.

Basic Requirements

• Vocational Training and 3+ years experience required; or GED with 5+ years in related field. (but does not require a university degree).
• Must be able to perform good mechanical and electrical assembly. Must understand the use of all production equipment.
• Must have a general understanding of the operation and use of key Automation products.
• Must be familiar with and understand all procedures and specifications relating to assembly, testing, packing, and shipping of Automation products, including but not limited to: Process Control, Inspection and Testing, Inspection and Test Status.
• Must have the ability to lift up to 60 pounds; bend and lift containers.
• Must have the ability to operate cranes and towmotors safely and responsibly.
• Must have the ability to properly adjust Volts/WFS, and weld with a MIG welder.

Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

RightWorks is hiring Mechanical / Assembly Technician for long-term work. We would ideally like someone who lives in the Cleveland region that is willing to travel to Kennesaw GA for the first couple months.-We are looking for experienced technicians to serve a major manufacturing company that builds tanks for major beverage companies like Coca Cola, Pepsi, & Dr Pepper.-You will be helping to start a new Cleveland-based technician group & will train at the company's existing manufacturing plant in Kennesaw GA for the first couple of months.-Per diem (hotels & meals) provided while you are traveling.-These positions could offer significant career growth into leadership or field service, top pay, & excellent benefits.-Project kickoff expected to be in Kennesaw from early August to September or October, and then helping to lead the new technicians once you return home to the Cleveland plant.

The Automation Assembly Technician is responsible for all phases of robotic cell integration, configuration, and some programming. The role works closely with Engineering, Service, and Applications. Job Duties Responsibilities Responsible for the Ele Assembly Technician, Technician, Automation, Assembly, Technical Support, Mechanical, Manufacturing

Eaton's AER FMC Fuel Motion Control Systems division is currently seeking an Assembly Technician- Overhaul & Repair for the 1st shift. This role is in our Maintenance, Repair and Overhaul (MRO) group. This position is based in Euclid, OH. The Euclid facility is a leader in the design, development, manufacture and delivery of Aerospace Fuel Pumping components, systems and services to the global aftermarket and OEM markets. The MRO Technician is responsible for the repair and overhaul of main engine fuel pumps, boost pumps, and other commercial pumping devices. 1st Shift Hours: 7:00AM -3:30PM. The expected annual salary range for this role is $45749.97 - $67099.96 a year. This position is also eligible for overtime earnings and also a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

What you'll do:

• Disassemble, inspect, disposition and reassemble customer field returns of high-volume units in accordance with component overhaul manuals and/or other approved technical documents. Perform all tasks to the FAA, EASA, and CAAC approved procedures.
• Prepare a concise and accurate documentation package for every repaired or overhauled unit.
• Develop a clear understanding of all FAA, EASA, and CAAC approved procedures. Maintain a current knowledge of all requirements.
• Effectively communicate with coworkers to ensure the efficient processing of repairs through the MRO facility and with internal departments such as quality, customer service, stock room, etc. and external customers and auditors as required.
• Ensure that your required training/re-training requirements are achieved and properly documented for FAA record keeping. Participate in departmental continuous improvement projects.
• Perform other duties as directed by your supervisor, which could include receiving/shipping, final test, pump testing, and non-destructive testing.

Qualifications:

• Basic (Required) Qualifications:
• Minimum High School diploma/GED equivalent from an accredited institution.
• Minimum of 2 years experience in mechanical assembly AND/OR experience in the maintenance of mechanical devices such as pumps, motors, etc.
• This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, the applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
• No relocation is offered for this position. Only candidates that reside within a 50-mile radius of the Euclid, OH facility will be considered. (Active Duty Military Service member candidates are exempt from the geographical area limitation).
• Preferred Qualifications:
• Experience in an Aerospace environment.
• Associates degree.
• Understands CMM's, S/B's, engineering drawings, and repair sketches.
• 3 years' experience in aircraft/engine accessory maintenance.
• MFG-Pro or other ERP experience.
• Experienced in multiple pump models is efficient and achieves high five metrics.
• Knowledgeable in administrative tasks such as Contract review, RTS, etc.
• Customer Service/UI Experience.
• Skills:
• Participate in CI events and help problem solve issues.
• Effective trainer ability to cross admin and direct repair and overhaul tasks.
• Possess problem solving skills.
• Ability to properly disposition hardware.
• Possess sufficient computer skills to perform data entry within our MRP system (MFG-Pro).
• Good communication and organizational skills.
• Proficient in Microsoft Office programs.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1- to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's AER FMC Fuel Motion Control Systems division is currently seeking an Assembly Technician- Overhaul & Repair 2nd Shift. This role will sit within Eaton's Maintenance, Repair and Overhaul (MRO) group at our Euclid, OH manufacturing plant. The Euclid facility has approximately 330 employees and is a leader in the design, development, manufacture and delivery of Aerospace Fuel Pumping components, systems and services to the global aftermarket and OEM markets. The MRO Technician is responsible for the repair and overhaul of main engine fuel pumps, boost pumps and other commercial pumping devices. 2nd Shift Hours: 3:30PM-12AM. The expected annual salary range for this role is $45749.97 - $67099.96 a year. This position is also eligible for overtime earnings and also a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

• Disassemble, inspect, disposition and reassemble customer field returns of high-volume units in accordance with component overhaul manuals and/or other approved technical documents. Perform all tasks to the FAA, EASA and CAAC approved procedures.
• Prepare a concise and accurate documentation package for every repaired or overhauled unit.
• Develop a clear understanding of all FAA, EASA, and CAAC approved procedures. Maintain a current knowledge of all requirements.
• Effectively communicate with coworkers to ensure the efficient processing of repairs through the MRO facility and with internal departments such as quality, customer service, stock room, etc. and external customers and auditors as required.
• Ensure that your required training/re-training requirements are achieved and properly documented for FAA record keeping. Participate in departmental continuous improvement projects.
• Perform other duties as directed by your supervisor, which could include receiving/shipping, final test, pump testing and non-destructive testing.

Basic (Required) Qualifications:

• Minimum High School diploma/GED equivalent from an accredited institution.
• Minimum of 2 years experience in mechanical assembly AND/OR experience in the maintenance of mechanical devices such as pumps, motors, etc.
• This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee.
• Must be authorized to work in the United States without company sponsorship now or in the future.
• No relocation is offered for this position. Only candidates that reside within a 50-mile radius of the Euclid, OH facility will be considered. (Active Duty Military Service member candidates are exempt from the geographical area limitation).

Preferred Qualifications:

• Experience in an Aerospace environment.
• Associates degree
• Understands CMM's, S/B's, engineering drawings and repair sketches.
• 3 years' experience in aircraft/engine accessory maintenance
• MFG-Pro or other ERP experience.
• Experienced in multiple pump models is efficient and achieves high five metrics.
• Knowledgeable in administrative tasks such as Contract review, RTS, etc.
• Customer Service/UI Experience

• Participate in CI events and help problem solve issues.
• Effective trainer ability to cross admin and direct repair and overhaul tasks.
• Possess problem solving skills.
• Ability to properly disposition hardware.
• Possess sufficient computer skills to perform data entry within our MRP system (MFG-Pro).
• Good communication and organizational skills.
• Proficient in Microsoft Office programs.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1- to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Disassemble, inspect, disposition and reassemble customer field returns of high-volume units in accordance with component overhaul manuals and/or other approved technical documents. Perform all tasks to the FAA, EASA and CAAC approved procedures. Prepare a concise and accurate documentation package for every repaired or overhauled unit. Develop a clear understanding of all FAA, EASA, and CAAC approved procedures. Maintain a current knowledge of all requirements. Effectively communicate with coworkers to ensure the efficient processing of repairs through the MRO facility and with internal departments such as quality, customer service, stock room, etc. and external customers and auditors as required. Ensure that your required training/re-training requirements are achieved and properly documented for FAA record keeping. Participate in departmental continuous improvement projects. Perform other duties as directed by your supervisor, which could include receiving/shipping, final test, pump testing and non-destructive testing. Minimum High School diploma/GED equivalent from an accredited institution. Minimum of 2 years experience in mechanical assembly AND/OR experience in the maintenance of mechanical devices such as pumps, motors, etc. This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158. No relocation is offered for this position. Only candidates that reside within a 50-mile radius of the Euclid, OH facility will be considered. (Active Duty Military Service member candidates are exempt from the geographical area limitation). Experience in an Aerospace environment. Associates degree Understands CMM's, S/B's, engineering drawings and repair sketches 3 years' experience in aircraft/engine accessory maintenance MFG-Pro or other ERP experience Experienced in multiple pump models - is efficient and achieves high five metrics. Knowledgeable in administrative tasks such as - Contract review, RTS, etc. Customer Service/UI Experience Participate in CI events and help problem solve issues. Effective trainer - ability to cross admin and direct repair and overhaul tasks. Possess problem solving skills. Ability to properly disposition hardware. Possess sufficient computer skills to perform data entry within our MRP system (MFG-Pro). Good communication and organizational skills. Proficient in Microsoft Office programs.

Eaton's AER FMC Fuel Motion Control Systems division is currently seeking a Assembly Technician- Overhaul & Repair 2nd Shift . This role will sit within Eaton's Maintenance, Repair and Overhaul (MRO) group at our Euclid, OH manufacturing plant. The Euclid facility has approximately 330 employees and is a leader in the design, development, manufacture and delivery of Aerospace Fuel Pumping components, systems and services to the global aftermarket and OEM markets. The MRO Technician is responsible for the repair and overhaul of main engine fuel pumps, boost pumps and other commercial pumping devices. 2nd Shift Hours: 3:30PM-12AM The expected annual salary range for this role is $45749.97 - $67099.96 a year. This position is also eligible for overtime earnings and also a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do:Disassemble, inspect, disposition and reassemble customer field returns of high-volume units in accordance with component overhaul manuals and/or other approved technical documents. Perform all tasks to the FAA, EASA and CAAC approved procedures.Prepare a concise and accurate documentation package for every repaired or overhauled unit.Develop a clear understanding of all FAA, EASA, and CAAC approved procedures. Maintain a current knowledge of all requirements.Effectively communicate with coworkers to ensure the efficient processing of repairs through the MRO facility and with internal departments such as quality, customer service, stock room, etc. and external customers and auditors as required.Ensure that your required training/re-training requirements are achieved and properly documented for FAA record keeping. Participate in departmental continuous improvement projects.Perform other duties as directed by your supervisor, which could include receiving/shipping, final test, pump testing and non-destructive testing.Qualifications:Basic (Required) Qualifications:Minimum High School diploma/GED equivalent from an accredited institution.Minimum of 2 years experience in mechanical assembly AND/OR experience in the maintenance of mechanical devices such as pumps, motors, etc.This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee.Must be authorized to work in the United States without company sponsorship now or in the future.No relocation is offered for this position. Only candidates that reside within a 50-mile radius of the Euclid, OH facility will be considered. (Active Duty Military Service member candidates are exempt from the geographical area limitation). Preferred Qualifications:Experience in an Aerospace environment.Associates degreeUnderstands CMM's, S/B's, engineering drawings and repair sketches.3 years' experience in aircraft/engine accessory maintenance MFG-Pro or other ERP experience.Experienced in multiple pump models - is efficient and achieves high five metrics.Knowledgeable in administrative tasks such as - Contract review, RTS, etc.Customer Service/UI ExperienceSkills:Participate in CI events and help problem solve issues.Effective trainer - ability to cross admin and direct repair and overhaul tasks.Possess problem solving skills.Ability to properly disposition hardware.Possess sufficient computer skills to perform data entry within our MRP system (MFG-Pro).Good communication and organizational skills. Proficient in Microsoft Office programs.#LI-RR2We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1- to discuss your specific need. Only accommodation requests will be accepted by this phone number.We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.