6 Manufacturing jobs in Elko
Manufacturing Supervisor
29803 Aiken, South Carolina
Shaw Industries Inc
Posted 18 days ago
Job Viewed
Job Description
Job Title
Manufacturing Supervisor
Position Overview
Shaw Industries is looking for a Night Shift Supervisor(7pm-7am) to support and oversee the associates and production efforts within the Extrusion Department at our Aiken, SC facility.
Essential Duties:
+ Communicate and enforce standards and expectations for all shift employees.
+ Work effectively to achieve consistency in daily work related activities utilizing Support Team.
+ Hold daily Pre-Shift meetings with associates to cover important Safety, Quality and Productivity information. Maintain a safe working environment throughout the shift.
+ Communicate with existing supervisor regarding any safety incidents, quality issues, changes, problems, or concerns about which knowledge may be needed to run shift.
+ Verify staffing meets current needs. Correspond with employees and communicate assignments as required.
+ Review previous production and quality performance. Ensure current lots are running per specifications, procedures are being followed, and quality markers are correct.
+ Maintain standard work procedures for Supervisors and perform accordingly
+ Help to maintain lab checks are completed and verified on a timely basis. Proactively utilize SPC charts to upkeep 1st quality yarn.
+ Build trusting relationships with employees, through team recognition, coaching, guiding, and acting as a resource on their behalf.
+ Thoroughly communicate with incoming supervisor on any changes made, upcoming changes, special sampling, problem lines, call ins, etc. This includes finalizing the shift report and holding a shift handoff meeting with the incoming supervisor.
+ Understand the department's standard operating procedures and work instructions and assess for compliance.
+ Review and approve associates time in Workforce as well as being knowledgeable of other functions.
+ Troubleshoot process as needed. To include: Buhler system, Process Control System, finish system, maestros and floor pressure monitoring.
+ Hold one-on-ones with each associate on a regular basis to coach and counsel.
+ Conduct a Positive Discipline Program
+ Promote morale throughout the department
Other Duties:
+ Comply with department Work Instruction and Standard Operating Procedures found in SMS manual.
+ Perform all job duties using safe work methods.
+ Comply with corporate absenteeism and tardiness policy.
+ Complies with SAFE System and Shaw Environmental System (SES) procedures.
+ Work normally scheduled days adhering to starting and stopping times. Work overtime as needed.
+ Communicate and enforce standards and expectations for all shift associates.
+ Perform other duties as assigned by Department Manager.
Requirements:
+ High School Diploma/GED required
+ 1+ years of experience in a supervisor role in a supervisory/leadership role in a manufacturing facility
+ Prior leadership experience preferred, especially as a Supervisor or similar role
+ Previous manufacturing experience preferred
+ Strong communication, interpersonal, and problem-solving skills
+ Preferred proficiency in computer programs (Microsoft office, Outlook, CMMS/Work-order systems, etc.)
Competencies:
+ Build trusting relationships
+ Build a successful team
+ Drive results
+ Facilitate Change
+ Demonstrate Good Judgement
Shaw benefits include:
+ Medical, dental, vision insurance and Pet insurance
+ Life insurance and disability coverage
+ Tuition reimbursement
+ Employee assistance program
+ Health savings account
+ Paid Time Off
+ Parental Leave
+ 401K and Retirement Plans
+ Product discounts for employees
+ Gym membership discounts
+ Adoption assistance
+ Shaw Family Health Center (Dalton, GA, and Cartersville, GA, locations)
+ And much more.
Click here to watch a video job profile for this position. (0:46) ( Shift
12 Hr rotating shift, Hrs fall to in punch day, Act Calendar, shift starts AM, days change only
Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.
Manufacturing Supervisor
Position Overview
Shaw Industries is looking for a Night Shift Supervisor(7pm-7am) to support and oversee the associates and production efforts within the Extrusion Department at our Aiken, SC facility.
Essential Duties:
+ Communicate and enforce standards and expectations for all shift employees.
+ Work effectively to achieve consistency in daily work related activities utilizing Support Team.
+ Hold daily Pre-Shift meetings with associates to cover important Safety, Quality and Productivity information. Maintain a safe working environment throughout the shift.
+ Communicate with existing supervisor regarding any safety incidents, quality issues, changes, problems, or concerns about which knowledge may be needed to run shift.
+ Verify staffing meets current needs. Correspond with employees and communicate assignments as required.
+ Review previous production and quality performance. Ensure current lots are running per specifications, procedures are being followed, and quality markers are correct.
+ Maintain standard work procedures for Supervisors and perform accordingly
+ Help to maintain lab checks are completed and verified on a timely basis. Proactively utilize SPC charts to upkeep 1st quality yarn.
+ Build trusting relationships with employees, through team recognition, coaching, guiding, and acting as a resource on their behalf.
+ Thoroughly communicate with incoming supervisor on any changes made, upcoming changes, special sampling, problem lines, call ins, etc. This includes finalizing the shift report and holding a shift handoff meeting with the incoming supervisor.
+ Understand the department's standard operating procedures and work instructions and assess for compliance.
+ Review and approve associates time in Workforce as well as being knowledgeable of other functions.
+ Troubleshoot process as needed. To include: Buhler system, Process Control System, finish system, maestros and floor pressure monitoring.
+ Hold one-on-ones with each associate on a regular basis to coach and counsel.
+ Conduct a Positive Discipline Program
+ Promote morale throughout the department
Other Duties:
+ Comply with department Work Instruction and Standard Operating Procedures found in SMS manual.
+ Perform all job duties using safe work methods.
+ Comply with corporate absenteeism and tardiness policy.
+ Complies with SAFE System and Shaw Environmental System (SES) procedures.
+ Work normally scheduled days adhering to starting and stopping times. Work overtime as needed.
+ Communicate and enforce standards and expectations for all shift associates.
+ Perform other duties as assigned by Department Manager.
Requirements:
+ High School Diploma/GED required
+ 1+ years of experience in a supervisor role in a supervisory/leadership role in a manufacturing facility
+ Prior leadership experience preferred, especially as a Supervisor or similar role
+ Previous manufacturing experience preferred
+ Strong communication, interpersonal, and problem-solving skills
+ Preferred proficiency in computer programs (Microsoft office, Outlook, CMMS/Work-order systems, etc.)
Competencies:
+ Build trusting relationships
+ Build a successful team
+ Drive results
+ Facilitate Change
+ Demonstrate Good Judgement
Shaw benefits include:
+ Medical, dental, vision insurance and Pet insurance
+ Life insurance and disability coverage
+ Tuition reimbursement
+ Employee assistance program
+ Health savings account
+ Paid Time Off
+ Parental Leave
+ 401K and Retirement Plans
+ Product discounts for employees
+ Gym membership discounts
+ Adoption assistance
+ Shaw Family Health Center (Dalton, GA, and Cartersville, GA, locations)
+ And much more.
Click here to watch a video job profile for this position. (0:46) ( Shift
12 Hr rotating shift, Hrs fall to in punch day, Act Calendar, shift starts AM, days change only
Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.
View Now
0
Manufacturing Supervisor II
29803 Aiken, South Carolina
Shaw Industries Inc
Posted 18 days ago
Job Viewed
Job Description
Job Title
Manufacturing Supervisor II
Position Overview
Shaw's facility in Aiken, SC is currently undergoing a $400 million expansion effort which will create more than 300 new jobs in the region, and will support increased production output of both polymer and fiber for Shaw Industries. The facility currently employs over 600 in the greater Augusta region.
Overview:
The Heatset Manufacturing Supervisor (Night Shift) is responsible for overseeing the associates and production efforts within the Heatset Department.
Shaw Industries Group, Inc. is a wholly owned subsidiary of Berkshire Hathaway, and is a global leader in delivering carpet, hardwood, tile & stone, laminate, synthetic turf, and other specialty products to residential and commercial markets worldwide. We are committed to creating a better future for our customers, our people, our company, and our communities.
Essential Duties:
+ Coordinate with outgoing supervisors on ongoing issues that need to be addressed, and work with shift associates and other supervisors to resolve them
+ Coordinate all Line Changes (Setup, Startup, Walk down & EOL according to procedures)
+ Perform special instructions left by Department Manager to be carried out on the shift if needed. This also includes communicating any information concerning Supervisor or shift employees? Check email daily and periodically during the shift.
+ Coordinate with Twisting Department to ensure proper flow of yarn through Heatset Department.
+ Meet with employees during daily pre-shift to cover safety, quality, and other information concerning Heatset Department? Ensure all employee sign off sheets are completed and turned in to Department Manager.
+ Ensure all training is completed following SMS training procedures? Evaluate training with trainers and trainees and document on training check sheets.
+ Complete any necessary change forms to transfer an employee from an assigned shift to another, to move an employee from one job to another. Inform affected employees of any changes in job assignments
+ Attempt to cover open jobs, vacations, or absences on assigned shift through use of call-ins or operators willing to cover from other shifts? Use Voluntary Assignment Form for operators covering each other's job as needed.
+ Complete Workforce timekeeping and address exceptions daily.
+ Ensure the use of first quality yarn by collaborating with Supervisors, Department Managers, or Q.E. personnel.
+ If a yarn mix is found, ensure it is handled according to procedure for mixes.
+ If nonconforming yarn is found, handle according to procedure? Have technicians repair any mechanical problems causing yarn defects.
+ Prepare to work any additional hours on other shifts as needed to work on special assignments as required by Department Manager.
+ Collect all forms from technicians daily and forward to Senior Process Engineer (Heatset).
+ Follow up on Weekly Heatset P.M. Work Orders? Ensure that all forms are completed.
+ Update Heatset Daily Production Report Spreadsheet
Other Duties:
+ Comply with department Work Instruction and Standard Operating Procedures found in SMS manual.
+ Perform all job duties using safe work methods.
+ Comply with corporate absenteeism and tardiness policy.
+ Complies with SAFE System and Shaw Environmental System (SES) procedures.
+ Work normally scheduled days adhering to starting and stopping times? Work overtime as needed.
+ Communicate and enforce standards and expectations for all shift associates.
+ Perform other duties as assigned by Department Manager.
Requirements:
Must possess good interpersonal, communication and organizational skills.
Actively participate in the PRIDE and FIBER Processes (internal).
Must be able to work holidays, weekends, and overtime as needed.
Plant 78 is a tobacco-free facility.
Competencies:
+ Plan & Organize
+ Deliver Compelling Communication
+ Drive Results
+ Build Trusting Relationships
Position overview - Vimeo ( Shift hours are 6:45pm - 7:00am
Shaw benefits include:
+ Medical, dental, and vision insurance
+ Life insurance and disability coverage
+ Tuition reimbursement
+ Employee assistance program
+ Health savings account
+ Paid Time Off
+ Parental Leave
+ 401K and Retirement Plans
+ Product discounts for employees
+ Adoption assistance
+ Shaw Family Health Center (Dalton, GA, and Cartersville, GA, locations)
+ And much more.
Work Shift
12 Hr rotating shift, Hrs fall to in punch day, Act Calendar, shift starts PM, days change only
Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.
Manufacturing Supervisor II
Position Overview
Shaw's facility in Aiken, SC is currently undergoing a $400 million expansion effort which will create more than 300 new jobs in the region, and will support increased production output of both polymer and fiber for Shaw Industries. The facility currently employs over 600 in the greater Augusta region.
Overview:
The Heatset Manufacturing Supervisor (Night Shift) is responsible for overseeing the associates and production efforts within the Heatset Department.
Shaw Industries Group, Inc. is a wholly owned subsidiary of Berkshire Hathaway, and is a global leader in delivering carpet, hardwood, tile & stone, laminate, synthetic turf, and other specialty products to residential and commercial markets worldwide. We are committed to creating a better future for our customers, our people, our company, and our communities.
Essential Duties:
+ Coordinate with outgoing supervisors on ongoing issues that need to be addressed, and work with shift associates and other supervisors to resolve them
+ Coordinate all Line Changes (Setup, Startup, Walk down & EOL according to procedures)
+ Perform special instructions left by Department Manager to be carried out on the shift if needed. This also includes communicating any information concerning Supervisor or shift employees? Check email daily and periodically during the shift.
+ Coordinate with Twisting Department to ensure proper flow of yarn through Heatset Department.
+ Meet with employees during daily pre-shift to cover safety, quality, and other information concerning Heatset Department? Ensure all employee sign off sheets are completed and turned in to Department Manager.
+ Ensure all training is completed following SMS training procedures? Evaluate training with trainers and trainees and document on training check sheets.
+ Complete any necessary change forms to transfer an employee from an assigned shift to another, to move an employee from one job to another. Inform affected employees of any changes in job assignments
+ Attempt to cover open jobs, vacations, or absences on assigned shift through use of call-ins or operators willing to cover from other shifts? Use Voluntary Assignment Form for operators covering each other's job as needed.
+ Complete Workforce timekeeping and address exceptions daily.
+ Ensure the use of first quality yarn by collaborating with Supervisors, Department Managers, or Q.E. personnel.
+ If a yarn mix is found, ensure it is handled according to procedure for mixes.
+ If nonconforming yarn is found, handle according to procedure? Have technicians repair any mechanical problems causing yarn defects.
+ Prepare to work any additional hours on other shifts as needed to work on special assignments as required by Department Manager.
+ Collect all forms from technicians daily and forward to Senior Process Engineer (Heatset).
+ Follow up on Weekly Heatset P.M. Work Orders? Ensure that all forms are completed.
+ Update Heatset Daily Production Report Spreadsheet
Other Duties:
+ Comply with department Work Instruction and Standard Operating Procedures found in SMS manual.
+ Perform all job duties using safe work methods.
+ Comply with corporate absenteeism and tardiness policy.
+ Complies with SAFE System and Shaw Environmental System (SES) procedures.
+ Work normally scheduled days adhering to starting and stopping times? Work overtime as needed.
+ Communicate and enforce standards and expectations for all shift associates.
+ Perform other duties as assigned by Department Manager.
Requirements:
Must possess good interpersonal, communication and organizational skills.
Actively participate in the PRIDE and FIBER Processes (internal).
Must be able to work holidays, weekends, and overtime as needed.
Plant 78 is a tobacco-free facility.
Competencies:
+ Plan & Organize
+ Deliver Compelling Communication
+ Drive Results
+ Build Trusting Relationships
Position overview - Vimeo ( Shift hours are 6:45pm - 7:00am
Shaw benefits include:
+ Medical, dental, and vision insurance
+ Life insurance and disability coverage
+ Tuition reimbursement
+ Employee assistance program
+ Health savings account
+ Paid Time Off
+ Parental Leave
+ 401K and Retirement Plans
+ Product discounts for employees
+ Adoption assistance
+ Shaw Family Health Center (Dalton, GA, and Cartersville, GA, locations)
+ And much more.
Work Shift
12 Hr rotating shift, Hrs fall to in punch day, Act Calendar, shift starts PM, days change only
Shaw Industries is an equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.
View Now
1
Senior Manufacturing Engineer
29853 Williston, South Carolina
Crane Payment Innovations
Posted 18 days ago
Job Viewed
Job Description
**Senior Manufacturing Engineer**
Location **SC, Williston**
Department **Manufacturing**
Employment Type **Full Time**
Have you ever used the self-checkout? Played the slots at a casino? Maybe you grabbled a drink for a vending machine or paid to park your car? If you answered with a resounding "YES", then you have done so with the aid of one of the 10 million devices installed by Crane Payment Innovations (CPI).
We make the technology that powers your everyday life, enabling more than 4 billion transactions every week in more than 143 currencies worldwide. From cash and coins to cards and mobile, we keep the world of payments moving with smart validation devices and business management software.
Headquartered in Malvern, PA, CPI is supported by more than 2500 global associates, 7 manufacturing sites, and 12 corporate offices.
If you want to have a hands-on global impact on payment solutions, we want you to join our team as a **Senior** **Manufacturing Engineer in our CPI Williston, South Carolina facility.**
**WHAT YOU WILL BE DOING**
As our Manufacturing Engineer you will coordinate and provide support to the Site including second-level Manufacturing Engineers and new product introductions. Support the continuous improvement activities, driving best practices, and innovation initiatives. This role is critical in providing support to the Site.
**As a Senior Manufacturing Engineer, you will be responsible for supporting the Value Stream:**
+ Lead and facilitate Kaizens
+ Establish Kanban where required
+ Develop layouts (workplace/plant/line/functional areas) to increase efficiency
+ Provide technical assistance in the building of all assemblies and components used in the product
+ Perform time and motion studies
+ Create a process and routing procedure to document the best procedure to do a job
+ Provide information to cost accounting
+ Conceptualize tooling to enhance efficiency. Work with Tool Room personnel and outside sources, as required, to accomplish the task
+ Coordinate the activities of contractors during projects
+ Act as a liaison with design engineering on new or modified designs
+ Create process routings and coordinate tooling construction
+ Write capital expenditure requests
+ Maintain inventory and ordering procedures for consumable shops supplies in the tool crib. Acquire supplies as needed
+ Maintain focus on continuous improvement through researching innovative, cost-efficient business solutions
+ Implementation and maintenance of digital modelling in all levels including work centers, departments, value streams, and site
+ Conduct and maintain capacity vs demand analysis
+ Provide engineering support for major projects including capital expenditures
+ Routing generation and maintenance
+ Provide Ergonomic analysis for product line work cells or cell layouts
**WHO WE ARE LOOKING FOR**
**Qualifications** **and** **Requirements**
+ Bachelor's degree in Engineering
+ 3-5 years of experience in production processes in a manufacturing plant
+ 2-3 years of experience in manufacturing troubleshooting tools (change implementation)
+ Budget management exposure
+ personnel management experience preferred
+ Desirable knowledge: industrial processes of electro-mechanical assembly. APQP, ISO9001. AutoCAD drawing, Solid Works, Basic electronics knowledge, circuit operation, and experiment design
+ Ability to travel nationally and internationally
+ Ability to attend out-of-hours meetings
+ **Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time**
**Personal Attributes**
+ **Customer Service Orientation:** You are driven by the desire to serve the customer and focused on their needs
+ **Decision Making and Results:** Display a sense of urgency and a timely decision maker. A reputation for making quality decisions and sticking to them
+ **Team Player:** You are approachable, and willing to follow, or lead based on the team's need and ability to interface with personnel from various departments and levels
+ **Ethics and Transparency:** Always honest and can be trusted with sensitive information
+ **Intellectual Capacity:** Your writing is concise and descriptive and believe that it is necessary to overcommunicate project status/updates. You assemble all necessary materials and information before starting a task
+ **Job Knowledge/ Technical Skills** : Have the knowledge of a manufacturing process. Able to apply process controls to correct abnormalities
+ **Leadership:** You are good at negotiating win-win solutions. You allow others to express themselves and try to understand others before expressing self
+ **Lean Sigma:** You have passion for continuous improvement and are always seeking a better way to do things. You have good insight and enjoy solving problems. You are innovative and resourceful
**WHAT WE ARE OFFERING**
+ Flexible work environments
+ Defined career growth plans with opportunities to go outside of your "comfort zone"
+ Team building activities that support innovation
+ Generous paid time off plus sick and Holiday pay
+ Medical, dental & vision insurance plans
+ 401K with company contribution
+ Flexible spending accounts
+ Life insurance and disability benefits
+ Discounts for childcare
+ Tuition assistance
+ Community involvement and volunteering events
+ Opportunities to travel and work at global sites
Sound interesting? Come see why we are OneCPI!
CPI is a part of Crane NXT
Crane NXT is a premier industrial technology company that provides proprietary and trusted technology solutions to secure, detect, and authenticate what matters most to its customers. The company is a pioneer in advanced, proprietary micro-optics technology for securing physical products, and its sophisticated electronic equipment and associated software leverages proprietary core capabilities with detection and sensing technologies. Crane NXT has approximately 4000 employees with global operations and manufacturing facilities in the United States, the United Kingdom, Mexico, Japan, Switzerland, Germany, Sweden, and Malta. For more information, visit Payment Innovations is committed to hiring a diverse workforce. Applicants will receive consideration without regard to race, color, religion, sex, gender identity, sexual orientation, age, disability, military status, or national origin or any other characteristic protected under federal, state, or applicable local law._
#CPI
**#LI CG1**
**#LI-onsite**
Location **SC, Williston**
Department **Manufacturing**
Employment Type **Full Time**
Have you ever used the self-checkout? Played the slots at a casino? Maybe you grabbled a drink for a vending machine or paid to park your car? If you answered with a resounding "YES", then you have done so with the aid of one of the 10 million devices installed by Crane Payment Innovations (CPI).
We make the technology that powers your everyday life, enabling more than 4 billion transactions every week in more than 143 currencies worldwide. From cash and coins to cards and mobile, we keep the world of payments moving with smart validation devices and business management software.
Headquartered in Malvern, PA, CPI is supported by more than 2500 global associates, 7 manufacturing sites, and 12 corporate offices.
If you want to have a hands-on global impact on payment solutions, we want you to join our team as a **Senior** **Manufacturing Engineer in our CPI Williston, South Carolina facility.**
**WHAT YOU WILL BE DOING**
As our Manufacturing Engineer you will coordinate and provide support to the Site including second-level Manufacturing Engineers and new product introductions. Support the continuous improvement activities, driving best practices, and innovation initiatives. This role is critical in providing support to the Site.
**As a Senior Manufacturing Engineer, you will be responsible for supporting the Value Stream:**
+ Lead and facilitate Kaizens
+ Establish Kanban where required
+ Develop layouts (workplace/plant/line/functional areas) to increase efficiency
+ Provide technical assistance in the building of all assemblies and components used in the product
+ Perform time and motion studies
+ Create a process and routing procedure to document the best procedure to do a job
+ Provide information to cost accounting
+ Conceptualize tooling to enhance efficiency. Work with Tool Room personnel and outside sources, as required, to accomplish the task
+ Coordinate the activities of contractors during projects
+ Act as a liaison with design engineering on new or modified designs
+ Create process routings and coordinate tooling construction
+ Write capital expenditure requests
+ Maintain inventory and ordering procedures for consumable shops supplies in the tool crib. Acquire supplies as needed
+ Maintain focus on continuous improvement through researching innovative, cost-efficient business solutions
+ Implementation and maintenance of digital modelling in all levels including work centers, departments, value streams, and site
+ Conduct and maintain capacity vs demand analysis
+ Provide engineering support for major projects including capital expenditures
+ Routing generation and maintenance
+ Provide Ergonomic analysis for product line work cells or cell layouts
**WHO WE ARE LOOKING FOR**
**Qualifications** **and** **Requirements**
+ Bachelor's degree in Engineering
+ 3-5 years of experience in production processes in a manufacturing plant
+ 2-3 years of experience in manufacturing troubleshooting tools (change implementation)
+ Budget management exposure
+ personnel management experience preferred
+ Desirable knowledge: industrial processes of electro-mechanical assembly. APQP, ISO9001. AutoCAD drawing, Solid Works, Basic electronics knowledge, circuit operation, and experiment design
+ Ability to travel nationally and internationally
+ Ability to attend out-of-hours meetings
+ **Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time**
**Personal Attributes**
+ **Customer Service Orientation:** You are driven by the desire to serve the customer and focused on their needs
+ **Decision Making and Results:** Display a sense of urgency and a timely decision maker. A reputation for making quality decisions and sticking to them
+ **Team Player:** You are approachable, and willing to follow, or lead based on the team's need and ability to interface with personnel from various departments and levels
+ **Ethics and Transparency:** Always honest and can be trusted with sensitive information
+ **Intellectual Capacity:** Your writing is concise and descriptive and believe that it is necessary to overcommunicate project status/updates. You assemble all necessary materials and information before starting a task
+ **Job Knowledge/ Technical Skills** : Have the knowledge of a manufacturing process. Able to apply process controls to correct abnormalities
+ **Leadership:** You are good at negotiating win-win solutions. You allow others to express themselves and try to understand others before expressing self
+ **Lean Sigma:** You have passion for continuous improvement and are always seeking a better way to do things. You have good insight and enjoy solving problems. You are innovative and resourceful
**WHAT WE ARE OFFERING**
+ Flexible work environments
+ Defined career growth plans with opportunities to go outside of your "comfort zone"
+ Team building activities that support innovation
+ Generous paid time off plus sick and Holiday pay
+ Medical, dental & vision insurance plans
+ 401K with company contribution
+ Flexible spending accounts
+ Life insurance and disability benefits
+ Discounts for childcare
+ Tuition assistance
+ Community involvement and volunteering events
+ Opportunities to travel and work at global sites
Sound interesting? Come see why we are OneCPI!
CPI is a part of Crane NXT
Crane NXT is a premier industrial technology company that provides proprietary and trusted technology solutions to secure, detect, and authenticate what matters most to its customers. The company is a pioneer in advanced, proprietary micro-optics technology for securing physical products, and its sophisticated electronic equipment and associated software leverages proprietary core capabilities with detection and sensing technologies. Crane NXT has approximately 4000 employees with global operations and manufacturing facilities in the United States, the United Kingdom, Mexico, Japan, Switzerland, Germany, Sweden, and Malta. For more information, visit Payment Innovations is committed to hiring a diverse workforce. Applicants will receive consideration without regard to race, color, religion, sex, gender identity, sexual orientation, age, disability, military status, or national origin or any other characteristic protected under federal, state, or applicable local law._
#CPI
**#LI CG1**
**#LI-onsite**
View Now
2
Quality Control Inspectors Needed! (UFPR)
29038 Cope, South Carolina
Marathon Staffing
Posted 7 days ago
Job Viewed
Job Description
Marathon Staffing in looking for hard working individuals to join our team! Location in the Rowesville SC area! Must have experience in Quality Control. Quality Control Inspectors examine products and material for defects.They remove all products that fail to meet specifications. Will be responsible for the following: · Performs start-up, in-process and final sampling inspection to assure that completed product meets all requirements including measurement and data recording. · Plans and executes required audit activities (schedules, plans, reports, finding resolutions, etc.) Performs and adequately documents internal Quality Audits of assigned office and projects. · Completes sampling final inspection and sign-off product for release. · Conduct non-conforming (NCMR) activities including back tracking, segregation and documentation. · Collaborates in development and maintenance of policy, processes, procedures and related documents. Reviews documents and implementation procedures to verify organization is compliant with quality management system. · Assures all labeling and paperwork are precise and accurate. · Promotes safety awareness including adhering to safety rules and requirements. Participates, as needed, in safety audits and assessments. · Performs other responsibilities associated with this position as may be appropriate. Supports the supervisor on duty as needed. Pay rate is $15 per hour to start and may increase based on skill or full time hire! To apply online, go to AND CALL Marathon Staffing is an equal opportunity employer. UFPR
View Now
3
Manager, Project and Operations Quality Assurance/Quality Control
29803 Aiken, South Carolina
Savannah River Mission Completion
Posted 5 days ago
Job Viewed
Job Description
**Overview**
Savannah River Mission Completion, LLC (SRMC) is seeking a **Manager, Project and Operations Quality Assurance/Quality Control** to be based in our Aiken, SC location on the Savannah River Site.
This Manager is responsible for Operations and Project Quality Engineering and Quality Control Program implementation including oversight of policy development, procedures and practices related to the function. Responsible as the Quality Assurance (QA) Manager for DOE/RW/O 333P, QA Requirements and Description for the Defense Waste Processing Facility. Ensures adherence to 10CFR830, Nuclear Safety Management, DOE Order 414.1, Quality Assurance, and NQA-1, QA Requirements for Nuclear Facility Applications, as well as other applicable rules and regulations. Oversees the implementation of implementing procedures and process improvements. Manages quality assurance and quality control professionals and/or subcontractors to execute work.
**Responsibilities**
+ Effectively manages SRMC quality assurance and quality control functions for all Liquid Waste Operational, project and minor modification activities
+ Responsible Quality Manager for DOE/ RW-0333P to demonstrate adequacy of the DWPF canisters to meet final repository quality requirements
+ Responsible Quality Manager for SCDHEC Tank Closure Quality Assurance Programs and implementation
+ Provides consultation and guidance for adherence and implementation of requirements under such requirements as 10CFR830, DOE Order 414.1, and NQA-1
+ Acts as company representative and interface to DOE and other external work groups pertaining to operational quality issues, Tank Closure, Projects, and DWPF Canister quality program implementation and effectiveness
+ Develops, implements, and supports procurement processes and cost-effective business strategies that ensure facilities and projects receive required materials of high quality and that meet specifications
+ Develops and/or modifies policy, procedures and/or practices related to the function
+ Conducts benchmarking and remains well versed in industry practice and protocol
+ Manages quality assurance and quality control professionals and subcontractors including, but not limited to, allocation of work assignments, work reviews, assessments, development and overall leadership
+ Ensures assigned personnel meet training qualification requirements
+ Other duties as assigned
**Qualifications**
+ Bachelor's degree (or equivalent educations/experience) with progressive experience in the quality assurance or engineering fields of which a minimum of 5 years is Nuclear Experience.
**Preferred Qualifications**
+ Bachelor's degree in Engineering or Science
+ Management or leadership over the quality assurance, quality control, or related engineering functions
+ Procurement Specification development and quality control experience
+ Demonstrated competence in DOE, DOD, and/or Commercial Nuclear QA/QC programs quality program practices
+ Demonstrated competency in regulatory interactions.
+ Current or previous qualification as an auditor or lead auditor (NQA-1) or equivalent
+ Experience with DOE/RW-0333P program implementation
**About**
Savannah River Mission Completion (SRMC), a prime contractor for the US Department of Energy, is responsible for managing the Department of Energy's Savannah River Site's Liquid Waste operations contract. Located in Aiken, South Carolina, SRMC is a limited liability company formed by nuclear operations and environmental remediation global leaders BWXT, Amentum, and Fluor. The SRMC Team is responsible for the closure of waste tanks, the operation of the Savannah River Site's Defense Waste Processing Facility, tank farm operations and associated production and disposal facilities. River Mission Completion offers a competitive and comprehensive benefits package with flexibility to meet your needs.
Highlights of our plans include:
+ 401k Retirement Savings Plan - 5% immediate company contribution, additional matching for employee contributions
+ Health Insurance & Prescription Drug Program
+ Health Savings Account
+ Telehealth with BlueCare on Demand
+ Dental Coverage
+ Vision Coverage
+ Flexible Spending Accounts
+ Includes 160 hours annual paid time off (accrued monthly), plus 11 paid holidays
+ Paid Parental Leave
+ Life and Accident Coverage
+ Disability Coverage
+ Employee Assistance Program
+ Tuition Reimbursement
**Minimum Pay**
USD $144,000.00/Yr.
**Maximum Pay**
USD $250,000.00/Yr.
**Pay Disclaimer**
Exceptions to this range/rate may be applied on a case-by-case basis taking into account aspects such as education, experience, and skill need of the organization.
**EEO Statement**
Savannah River Mission Completion is committed to equal employment opportunity to employees and qualified applicants regardless of their race, color, religion, gender, national origin, age, physical or mental disability, veteran status, status as a parent, sexual orientation, or genetics. Our equal employment opportunity policies encompass all aspects of the employment relationship, including application and hiring, promotion and transfer, selection for training opportunities, wage and salary administration.
Submit a Referral ( _2025-1756_
**Category** _Management_
**Position Type** _Full-Time_
**Remote** _No_
Savannah River Mission Completion, LLC (SRMC) is seeking a **Manager, Project and Operations Quality Assurance/Quality Control** to be based in our Aiken, SC location on the Savannah River Site.
This Manager is responsible for Operations and Project Quality Engineering and Quality Control Program implementation including oversight of policy development, procedures and practices related to the function. Responsible as the Quality Assurance (QA) Manager for DOE/RW/O 333P, QA Requirements and Description for the Defense Waste Processing Facility. Ensures adherence to 10CFR830, Nuclear Safety Management, DOE Order 414.1, Quality Assurance, and NQA-1, QA Requirements for Nuclear Facility Applications, as well as other applicable rules and regulations. Oversees the implementation of implementing procedures and process improvements. Manages quality assurance and quality control professionals and/or subcontractors to execute work.
**Responsibilities**
+ Effectively manages SRMC quality assurance and quality control functions for all Liquid Waste Operational, project and minor modification activities
+ Responsible Quality Manager for DOE/ RW-0333P to demonstrate adequacy of the DWPF canisters to meet final repository quality requirements
+ Responsible Quality Manager for SCDHEC Tank Closure Quality Assurance Programs and implementation
+ Provides consultation and guidance for adherence and implementation of requirements under such requirements as 10CFR830, DOE Order 414.1, and NQA-1
+ Acts as company representative and interface to DOE and other external work groups pertaining to operational quality issues, Tank Closure, Projects, and DWPF Canister quality program implementation and effectiveness
+ Develops, implements, and supports procurement processes and cost-effective business strategies that ensure facilities and projects receive required materials of high quality and that meet specifications
+ Develops and/or modifies policy, procedures and/or practices related to the function
+ Conducts benchmarking and remains well versed in industry practice and protocol
+ Manages quality assurance and quality control professionals and subcontractors including, but not limited to, allocation of work assignments, work reviews, assessments, development and overall leadership
+ Ensures assigned personnel meet training qualification requirements
+ Other duties as assigned
**Qualifications**
+ Bachelor's degree (or equivalent educations/experience) with progressive experience in the quality assurance or engineering fields of which a minimum of 5 years is Nuclear Experience.
**Preferred Qualifications**
+ Bachelor's degree in Engineering or Science
+ Management or leadership over the quality assurance, quality control, or related engineering functions
+ Procurement Specification development and quality control experience
+ Demonstrated competence in DOE, DOD, and/or Commercial Nuclear QA/QC programs quality program practices
+ Demonstrated competency in regulatory interactions.
+ Current or previous qualification as an auditor or lead auditor (NQA-1) or equivalent
+ Experience with DOE/RW-0333P program implementation
**About**
Savannah River Mission Completion (SRMC), a prime contractor for the US Department of Energy, is responsible for managing the Department of Energy's Savannah River Site's Liquid Waste operations contract. Located in Aiken, South Carolina, SRMC is a limited liability company formed by nuclear operations and environmental remediation global leaders BWXT, Amentum, and Fluor. The SRMC Team is responsible for the closure of waste tanks, the operation of the Savannah River Site's Defense Waste Processing Facility, tank farm operations and associated production and disposal facilities. River Mission Completion offers a competitive and comprehensive benefits package with flexibility to meet your needs.
Highlights of our plans include:
+ 401k Retirement Savings Plan - 5% immediate company contribution, additional matching for employee contributions
+ Health Insurance & Prescription Drug Program
+ Health Savings Account
+ Telehealth with BlueCare on Demand
+ Dental Coverage
+ Vision Coverage
+ Flexible Spending Accounts
+ Includes 160 hours annual paid time off (accrued monthly), plus 11 paid holidays
+ Paid Parental Leave
+ Life and Accident Coverage
+ Disability Coverage
+ Employee Assistance Program
+ Tuition Reimbursement
**Minimum Pay**
USD $144,000.00/Yr.
**Maximum Pay**
USD $250,000.00/Yr.
**Pay Disclaimer**
Exceptions to this range/rate may be applied on a case-by-case basis taking into account aspects such as education, experience, and skill need of the organization.
**EEO Statement**
Savannah River Mission Completion is committed to equal employment opportunity to employees and qualified applicants regardless of their race, color, religion, gender, national origin, age, physical or mental disability, veteran status, status as a parent, sexual orientation, or genetics. Our equal employment opportunity policies encompass all aspects of the employment relationship, including application and hiring, promotion and transfer, selection for training opportunities, wage and salary administration.
Submit a Referral ( _2025-1756_
**Category** _Management_
**Position Type** _Full-Time_
**Remote** _No_
View Now
4
Senior Quality Assurance - Control Engineer
29805 Aiken, South Carolina
pmXperts, Inc.
Posted 9 days ago
Job Viewed
Job Description
Title: Senior Quality Assurance - Control Engineer
SRNS Posting ID: 1422
PmXperts Job ID: 1360
Location: Onsite home base in Aiken, SC with offsite supplier facility travel required - Per Diem available for those who qualify
Start: Immediately, Long-term assignment
Must be US Citizen
Requirements :
Candidate must meet at least one of the following Requirements:
- PH.D. degree in Engineering/Science with 5 years of Quality Assurance, Quality Control, or Engineering experience in the fields of Operations, Maintenance, Construction, or Industrial Manufacturing
- MS degree in Engineering/Science with 8 years of Quality Assurance, Quality Control, or Engineering experience in the fields of Operations, Maintenance, Construction or Industrial Manufacturing
- BS degree in Engineering/Science with 10 years of Quality Assurance, Quality Control, or Engineering experience in the fields of Operations, Maintenance, Construction or Industrial Manufacturing
- Non-Technical degree with 13 years of Quality Assurance, Quality Control, or Engineering experience in the fields of Operations, Maintenance, Construction or Industrial Manufacturing
- At least 16 years of multi-disciplined professional Quality Assurance or engineering related experience with increasing levels of responsibility in an operations, maintenance, construction, or manufacturing environment, of which, 10 years must have been in a senior position.
- Practical experience in quality control, work control, materials management, civil/structural, mechanical, maintenance, construction, or related areas
- Candidate must be able to perform weekly field walk-downs of the job site for engineering work being performed. These walk-downs may involve constructions sites with uneven surfaces and work in progress, walking for distances over a half mile, and climbing ladders to access remote areas.
- Previous Mechanical and Welding Inspection and/or Fabrication experience.
- Working knowledge of American Welding Society (AWS) Codes
- Working knowledge of American Society of Mechanical Engineers (ASME) B31.3 welding code.
Preferred :
- Candidates has possessed a previous DOE clearance is preferred.
- Current or prior certification as a lead auditor is preferred
- Surveillance experience.
- Working knowledge of ASNT NDE Methods.
- Working knowledge of pressure testing.
Responsibilities :
- Define scope of technical and quality engineering programs and develop effective, quality solutions to challenges which involve unique or controversial problems.
- Creatively meet all company and industry requirements and apply site systems to achieve quality, cost-effective, and timely results.
- Give quality guidance to less senior professionals on related tasks.
- Apply technical and quality engineering experience in field of specialization to resolve complex problems.
- Incorporate advanced technical and quality engineering practices and a variety of complex features such as: complicated technical requirements, application of new or special materials or processes, and difficult coordination or oversight requirements into problem solving and program planning.
- Provide leadership in determining solutions to complex problems and be recognized as having expertise in a functional area of technical and quality engineering specialization.
- Provide direction and position responsibility both inside and outside department lines on programs seeking new approaches to problems and new application of existing engineering and quality assurance principles; evaluate the results of programs through surveillances, monitoring, assessments, and reviews; prepare reports and recommendations based on these evaluations; and, identify and recommend improvements where established technology, methodology, and procedures are inadequate for solution.
- Keep informed of the advancement of technology and requirements as applied within one's area of specialization and expertise.
- Develop QA programs and procedures and ensure compliance and effective execution of technical and quality assurance requirements within the assigned facility or program area.
- Be accountable for compliance with the approved schedules and that personnel under one's technical guidance are appropriately trained and effectively utilized.
- Prepare plans including schedules, budgets and personnel requirements for solving technical and quality engineering tasks identified by management.
- Develop schedules, monitor progress, monitor expenditures of budget and review quality of work completed to ensure that technical and quality requirements are met.
- Serve on a Facility Review Board, providing QA expertise in support of facility start-up and/or operation.
- Support facility/project needs within the assigned area by conducting procurement, procedure, and work package reviews.
- Communicate objectives and results to customers, colleagues, and management.
- Prepare reports, professional papers, and articles for internal publication; Occasionally prepare reports for external publication.
- Communicate with DOE-SR personnel regarding QA Program and corrective action status.
- Enhance expertise in field through leadership in local technical societies. May also participate in national technical societies, advanced studies, or national consensus standards committees.
- Demonstrate commitment to TQ concepts by active participation and successful implementation of Div./ Dept. TQ initiatives.
- Serve as a QA expert in evaluating the QA Programs of major program participants, including subcontractors and suppliers, in order to recommend corrective actions, redirect efforts, and provide judgment regarding a project or facility's potential for success. Present findings to program or facility management and Site QA.
- Perform other duties as assigned by management.
- Perform Supplier Surveillance Oversight activities utilizing checklist to determine effective and efficient fabrication is being performed.
- Review supplier submittals, design output documents and procurement request.
Area Security Access : Clearance not required. Uncleared.
Work Hours: A 40-hour work week is scheduled. SRNS utilizes various work schedules including 5/8s (8 hour/day; five days per week), 4/10's (10 hours/day; four days per week), and 9/80's (9 hours/day, five days on week AA and four days on week BB. Work week excludes SRNS holidays. Each workday has 30-minute lunch. Overtime will be expected at times to meet deliverables and will be utilized at the discretion of the Manager. This position is an SRNS onsite position that requires up to 80% travel to Supplier Facilities. Travel to supplier facilities/locations could be a two (2) week duration supporting oversight activities at a suppliers facility.
Why Join pmXperts?
At pmXperts, we are dedicated to providing expert project management and consulting services to the energy and defense industries. We offer a challenging yet rewarding environment where your contributions significantly impact our success and efficiency. Join us in driving project excellence and innovation.
pmXperts, Inc is an equal opportunity employer.
M/F/D/V
View Now
Be The First To Know
About the latest Manufacturing Jobs in Elko !
5