36 Manufacturing jobs in Hartville
Manufacturing Technician
Posted 3 days ago
Job Viewed
Job Description
The manufacturing technician is responsible for performing the assigned multi-skilled tasks in the production and processing of silicone rubber compounds, primarily in the manufacturing plant areas.
Responsibilities
Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.
- Measure all raw, in process, and finished materials in an accurate manner. Record weights neatly and accurately.
- Follow all mix instructions explicitly and sign off on each instruction according to standard procedure.
- Use all production equipment and hand tools in a safe and proper manner. Bring any hazards to the team leads attention immediately.
- Follow the Stop, Call, Wait and all other safety procedures explicitly in all aspects of the operation.
- Maintain work area in a neat and orderly fashion. Clean all production equipment and work areas adjacent to equipment between batches and at end of the shift. Move all scrap, empty containers, and production waste to the proper disposal area. Maintain and clean tools or other aids and store in the proper location.
- Package out material when batch process is complete.
- Make recommendations for changes/improvements to ISO-9000 work procedures as needed.
- Maintain good communication with oncoming shift.
- Utilize maintenance work order system to communicate any repairs needed to equipment or to resolve an unsafe situation.
- Perform other duties as assigned by supervisor.
- Lifts up to 60lbs.
- In contact with silicone rubber, powders, fluids.
- Stands 12 hours/day or more.
- Performs repetitive hand and arm motions.
- Performs twisting, bending, stooping motions.
- Forces 55 gallon drums with dolly.
- High school diploma or GED preferred.
- 3-5 years' experience in a production environment preferred.
- Experience with hazardous chemicals at a chemical company strongly preferred.
- Ability to read, write, understand, and communicate (verbal and written) effectively.
- Ability to work effectively within a team environment.
- Strong attention to detail.
- Ability to wear all required PPE.
- This position operates in an inside manufacturing facility.
- The role routinely operates the following equipment: 1,000-liter planetary mixer, 1,000-liter ram press, 40-liter planetary mixer, 40-liter ram press, 350-liter planetary mixer, 350-liter ram press, tow motor.
Shin-Etsu Silicones of America offers traditional benefits such as: Medical (choice of 3 different plan options), dental, vision, life insurance, short- and long-term disability insurance, 401(k) with company match, 10-paid holidays, vacation and personal time off, competitive pay.
Additional benefits include: Job stability and security, a safe and clean work environment, a great reputation in the industry as a leading silicone manufacturer, and an exceptional culture.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.
Manufacturing Technician
Posted 10 days ago
Job Viewed
Job Description
We begin with dreams. Dreams drive our motivation. Dreams are our future. The world's dreams, people's dreams, our dreams. Our passion creates ideas that make dreams come alive. Technology and products that were only dreams become reality.
All for dreams. Dreams challenge and the Nidec-Group will continue to meet the challenge. For the world's and people's tomorrows; the world's first, the world's best technologies and products; we will continue our part in creating a better society.
Job Summary
.Job Description
Manufacturing Engineering Technician provides technical support to engineers during the design of manufacturing processes for a production facility. Develop tools, implement designs, or integrate machinery, equipment, or computer technologies to ensure effective manufacturing processes.
Responsibilities & Duties
* Provides technical support to engineers during the design of manufacturing processes for a production facility.
* Assists in the development of layouts or floor plans.
* Conducts tests and troubleshoots equipment.
* Documents test procedures and results.
* Solves routine technical problems
Knowledge, Skills & Abilities
* 0 - 2 years of relevant experience
* Bachelor's Degree in related field
* Technology design-generating or adapting equipment and technology to serve user needs.
* Programming-writing computer programs for various purposes
* Installing equipment, machines, wiring or programs to meet specifications.
Additional Job Details
Equal Employment Opportunity and Affirmative Action at Nidec
Nidec is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants receive consideration for employment without regard to their age, gender, gender identity, sexual orientation, race, color, genetic information, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by law. For more information regarding your (EEO) rights as an applicant, please visit the following website:
No Soliciting
Nidec will not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to Nidec job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Nidec Talent Acquisition team is required before any external candidate can be submitted and such candidate must be submitted to the Nidec Talent Acquisition team.
Manufacturing Engineer
Posted 2 days ago
Job Viewed
Job Description
Job Description
- Provide technical expertise and direct support to set up capacity planning, enhance production efficiency, improve quality, and reduce costs
- This role collaborates with production and other internal teams to ensure innovative manufacturing processes and process improvements
- Design, maintain, and optimize manufacturing processes for ERP system
- Manage and integrate manufacturing processes to ensure accurate data flow
- Collect, analyze, and interpret data to optimize production processes
- Collaborate with leaders and production teams to design manufacturing lines and flows in line with lean methodologies
- Evaluate existing processes, identify inefficiencies, and recommend improvements to reduce cycle time and minimize waste
- Troubleshoot and resolve production-related issues, including equipment malfunctions, quality concerns, and production delays
- Monitor key performance indicators (KPIs) such as defect rates, downtime, and material utilization
- Lead continuous improvement initiatives and projects to increase productivity and reduce costs
- Improve manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout
- Establish and maintain documentation of manufacturing processes, procedures, and changes
- Provide manufacturing engineering support for all new and existing products
- Specify and design jigs, fixtures, and manufacturing tools
- Collaborate with cross functional teams including production, quality, and engineering
Must Have
- Bachelor's degree in mechanical engineering preferred
- 3+ years of experience in manufacturing process engineering
- Prior experience in process improvements with strong knowledge of lean manufacturing principles and production processes
- Certification in Lean, Six Sigma, or other continuous improvement methodologies
- In-depth knowledge and understanding of manufacturing lines/flows with lean methodologies and processes
- ERP systems routers knowledge
Nice to Have
- Experience with continuous improvement tools such as PFMEA, DFMEA, 8D, 5 Whys, fishbone, VSM, 6 Sigma and other lean tools
- Plant layout experience
- Process optimization experience
- New product introduction experience
Pay and Benefits
The pay range for this position is $46.00 - $53.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
- Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in North Canton,OH.
Application Deadline
This position is anticipated to close on Oct 20, 2025.
About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email (% ) for other accommodation options.
Manufacturing Associate
Posted 3 days ago
Job Viewed
Job Description
Description:
What if you were given the opportunity and responsibility to make a difference? At International Paper, you control your destiny. We offer challenging assignments and total rewards in countries around the world. When we say infinite possibilities, we mean it. Apply now and join a community that improves people's lives, the planet and our company's performance by transforming renewable resources into products people depend on every day.
**Manufacturing Associate**
**Pay Rate** : $21.35/hr. up to $5.01/hr
**Category/Shift** :
Hourly Full-Time Second and/or Third Shift 3PM-11PM or 11PM-7AM
**Physical Location** :
Streetsboro Box Facility
700 Mondial Parkway
Streetsboro, OH 4441
**The Job You Will Perform:**
+ Counting and stacking finished product
+ Reading factory orders
+ Accurately reading gauges and other test equipment
+ Utilizing basic shop math, inspecting
+ Accurately completing quality and administrative documents and following directions
+ This person will also be assigned to clean-up functions such as blowing down the machine, wiping off shafts, cleaning ink systems, vacuuming and sweeping the machine area, as well as picking up and shredding scrap.
**The Skills You Will Bring:**
+ Counting and stacking finished product
+ Reading factory orders
+ Follow written and oral instructions
+ Reading a tape measure
**The Benefits You Will Enjoy:**
International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets.
**The Career You Will Build:**
Leadership training, promotional opportunities
**The Impact You Will Make:**
We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 120 years. Join our team and you'll see why our team members say they're **Proud to be IP** .
**The Culture You Will Experience:**
International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture.
**The Company You Will Join:**
International Paper (NYSE: IP) is a leading global supplier of renewable fiber-based products. We produce corrugated packaging products that protect and promote goods, and enable worldwide commerce, and pulp for diapers, tissue and other personal care products that promote health and wellness. Headquartered in Memphis, Tenn., we employ approximately 38,000 colleagues globally. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2022 were 21.2 billion. Additional information can be found by visiting InternationalPaper.com.
International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color religion, national origin, disability, protected veterans status, age, or any other characteristic protected by law. International Paper complies with Federal and State Disability Laws and makes reasonable accommodations for applicants and employees wth disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact or .
Streetsboro OH 44241
International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact or .
Streetsboro OH 44241
Share this job:
Location:
Streetsboro, OH, US, 44241
Category: Hourly Job
Date: Oct 5, 2025
If you are not finding suitable opportunities, please click below to join our talent community!
Manufacturing Engineer
Posted 5 days ago
Job Viewed
Job Description
Job Description
- Provide technical expertise and direct support to set up capacity planning, enhance production efficiency, improve quality, and reduce costs
- This role collaborates with production and other internal teams to ensure innovative manufacturing processes and process improvements
- Design, maintain, and optimize manufacturing processes for ERP system
- Manage and integrate manufacturing processes to ensure accurate data flow
- Collect, analyze, and interpret data to optimize production processes
- Collaborate with leaders and production teams to design manufacturing lines and flows in line with lean methodologies
- Evaluate existing processes, identify inefficiencies, and recommend improvements to reduce cycle time and minimize waste
- Troubleshoot and resolve production-related issues, including equipment malfunctions, quality concerns, and production delays
- Monitor key performance indicators (KPIs) such as defect rates, downtime, and material utilization
- Lead continuous improvement initiatives and projects to increase productivity and reduce costs
- Improve manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout
- Establish and maintain documentation of manufacturing processes, procedures, and changes
- Provide manufacturing engineering support for all new and existing products
- Specify and design jigs, fixtures, and manufacturing tools
- Collaborate with cross functional teams including production, quality, and engineering
Must Have
- Bachelor's degree in mechanical engineering preferred
- 3+ years of experience in manufacturing process engineering
- Prior experience in process improvements with strong knowledge of lean manufacturing principles and production processes
- Certification in Lean, Six Sigma, or other continuous improvement methodologies
- In-depth knowledge and understanding of manufacturing lines/flows with lean methodologies and processes
- ERP systems routers knowledge
Nice to Have
- Experience with continuous improvement tools such as PFMEA, DFMEA, 8D, 5 Whys, fishbone, VSM, 6 Sigma and other lean tools
- Plant layout experience
- Process optimization experience
- New product introduction experience
Pay and Benefits
The pay range for this position is $46.00 - $53.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
- Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in North Canton,OH.
Application Deadline
This position is anticipated to close on Oct 17, 2025.
About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email (% ) for other accommodation options.
Manufacturing Intern
Posted 6 days ago
Job Viewed
Job Description
**Manufacturing Engineering Interns - BWX Technologies, Inc. - Barberton, OH**
**Welcome to BWXT:**
At BWXT, our interns perform challenging tasks in their field of study while developing and delivering unique solutions for use in a nuclear environment. Our interns work collaboratively as part of our teams and will create/update drawings and procedures, assist with product and/or tooling designs, perform testing and analysis, and assist with project management and the procurement of materials as needed. A BWXT internship not only provides valuable on the job training but allows you to be a part of something bigger!
BWXT offers paid internships along with a housing stipend for those interns whose home of record is more than 50 miles from Barberton, OH. Internships will last approximately 10-12 weeks. At the end of the internship, each intern has the opportunity to present their completed work/ assigned projects to the leadership team.
**Your Day to Day as a Manufacturing Engineering Intern:**
+ Learn and understand the responsibilities of a Manufacturing Engineer.
+ Development and support of manufacturing process plans in accordance with contract technical requirements. The Manufacturing Engineer assumes responsibility for implementation of the manufacturing process and improvements to the process during the complete fabrication cycle.
+ Ensures all design and quality requirements are satisfied. Works with Design Engineering during the component design phase to ensure the design can be manufactured in a cost-effective manner.
+ Identifies facility and tooling requirements, manufacturing methods and /or develops new manufacturing methods. Identifies material requirements and supports procurement.
+ Monitors performance and controls costs of manufacture. Prepares technical procedures and documents. Resolves any problems encountered during manufacture. Works with customers and vendors as necessary.
+ Provides status and schedule support of products during the complete manufacturing cycle. Prepares Program Plans as required, incorporating necessary schedule and support information.
**Required Qualifications:**
+ Successful candidates must be currently enrolled in an ABET accredited mechanical engineering program.
+ Students must be at a sophomore standing or above at the time the internship begins
+ Students must have a cumulative GPA of 3.0 or higher
+ Qualifications include strong communication and coordination skills, interest in working with multiple disciplines in support of product design and manufacture and adept with Scheduling Software Programs.
+ Preference will be given to students who have also completed coursework in Statics, Mechanics of Materials, and/or Solid Modeling.
+ US citizenship with no dual citizenship is required for this position
**What We Offer:**
+ Competitive paid internship.
+ Housing Stipend available for those who live 50 miles away.
+ Flexible work schedule with every other Friday off.
+ Professional development opportunities, including mentorship programs.
+ An inclusive atmosphere that celebrates new perspectives and supports collaboration between different generations.
+ The chance to be part of a mission-driven organization making a positive impact on the future of energy.
+ Opportunities for continuous learning and training to grow throughout your career!
As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities ("BWXT" or the "Company") complies with all federal, state, and local laws and customer requirements regarding COVID-19 and other health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company COVID-19 requirements within the workplace as a condition of employment.
Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified information or matter. Position requires U.S. Citizenship (with no dual citizenship) and ability to obtain and maintain a Department of Energy (DOE) security clearance which involves an extensive criminal and financial background investigation and previous employment reference verifications.
BWXT supports diversity and is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color religion, gender, national origin, citizenship, age, disability or veteran status
.
Manufacturing Engineer
Posted 15 days ago
Job Viewed
Job Description
**Manufacturing Engineer - BWX Technologies, Inc. - Barberton, Ohio**
**Responsibilities include:**
+ Responsible for development and support of manufacturing process plans in accordance with contract technical requirements.
+ The Manufacturing Engineer assumes responsibility for implementation of the manufacturing process and improvements to the process during the complete fabrication cycle.
+ Ensures all design and quality requirements are satisfied.
+ Works with Design Engineering during the component design phase to ensure the design can be manufactured in a cost-effective manner.
+ Interfaces directly with customer representatives and prepare data or presentations as needed
+ Identifies facility and tooling requirements, manufacturing methods and /or develops new manufacturing methods.
+ Identifies material requirements and supports procurement.
+ Monitors performance and controls costs of manufacture.
+ Prepares technical procedures and documents.
+ Resolves any problems encountered during manufacture.
+ Works with vendors as necessary.
+ Provides status and schedule support of products during the complete manufacturing cycle.
+ Prepares Program Plans as required, incorporating necessary schedule and support information.
**Job Qualifications/Requirements:**
+ Qualifications include strong communications skills, and interest in working with multiple disciplines in support of product design and manufacture and adept with MRP & Microsoft Office programs.
+ Bachelor's degree in engineering (Mechanical Engineering preferred)
+ Candidate must be a U.S. Citizen and able to obtain and maintain a DOE issued Security Clearance
Pay: $((cust_salaryMin)) - $(cust_salaryMax))
The base salary range for this position in ((stateProvince)) at the start of employment is expected to be between ((cust_salaryMin)) and ((cust_salaryMax)) per year. However, the base salary offered is based on local job market factors, and may vary further depending on factors specific to the selected job candidate, such as job-related knowledge, skills, experience, and other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of participation in these benefit plans will be provided at such time the selected job candidate receives an offer of employment. If hired, the selected job candidate will be employed 'at-will,' unless employed at a location and in a position subject to a collective bargaining agreement. The company further reserves the right to modify base salary (as well as any other discretionary payment, compensation or benefit program) at any time, including for reasons related to individual performance, company or individual department/team performance, and other market factors.
As a federal government contractor, BWX Technologies, Inc. and any subsidiaries, affiliates and related entities ("BWXT" or the "Company") complies with all federal, state, and local laws and customer requirements regarding health and safety protocols. As such, all BWXT new hires will be required to adhere to applicable Company health and safety requirements within the workplace as a condition of employment.
Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified information or matter. Position requires U.S. citizenship with (no dual citizenship) ability to obtain and maintain a Department of Energy (DOE) security clearance which involves an extensive criminal and financial background investigation, drug test and previous employment reference verifications.
BWXT is committed to the concept of Equal Employment Opportunity. We have established procedures to ensure that all personnel actions such as recruitment, compensation, career development, benefits, company-sponsored training and social recreational programs are administered without regard to race, color, religion, sex, national origin, citizenship, age, disability, protected veteran or other protected status.
BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid ("Agreement"). BWXT may consider any candidate for whom a recruiter or agency has submitted an unsolicited resume and explicitly reserves the right to hire such candidate(s) without any financial obligation to the recruiter or agency unless an Agreement is in place prior to presentation and such Agreement explicitly encompasses the job opening for which such fees or costs are sought. An email, verbal or other informal contact with any person within BWXT will not create a binding agreement. Agencies or recruiters without an Agreement are directed not to contact any hiring managers of BWXT with recruiting inquiries or resumes. Recruiters and agencies interested in partnering with BWXT may contact BWXT's Talent Acquisition team at
Be The First To Know
About the latest Manufacturing Jobs in Hartville !
Furnace Operator - Manufacturing
Posted 2 days ago
Job Viewed
Job Description
- Job Identification
- Job Category Operations
- Posting Date 09/03/2025, 06:38 PM
- Locations 1935 Warner Road SE, Canton, OH, 44707, US
- Job Schedule Full time
- Remote Work Schedule Availability? None
- Export-Controlled Data This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items
Position Highlights:
- Benefits begin on FIRST DAY OF EMPLOYMENT! (Medical, Dental, Vision)
- Pay rate of $25+ per hour
- Ability to cross train on multiple positions and earn additional pay
- Annual Bonus- Based on Company performance
- Attendance Bonus
- Shift Differential
- 401k with Company Match
Howmet Aerospace is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company's primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation.
Summary: Howmet Structure Systems has an immediate opening for a Furnace Utility Operator located at its Canton, Ingot facilities. This position is responsible for operating and maintaining high productivity melting furnaces.
Essential Duties and Responsibilities: This is not an exhaustive list of responsibilities; it is intended to provide a representative summary of the major duties and responsibilities of a furnace operator.
- Interpret and control furnace conditions to ensure the product is consistent with customer specifications and meets all quality standards.
- Operate equipment such as tow motors, overhead cranes, welders and hoists.
- Conduct preventive and general maintenance on furnace hardware.
- Troubleshoot equipment and system abnormalities and perform required maintenance to fix the issues.
- Operate hand tools: grinders, saws and drill presses to condition and prepare Ingots for the next process step.
- Adhere to all standard operating procedures and ensure compliance with all safety and quality processes.
Basic Qualifications:
- High school diploma or equivalent and a minimum of one-year related manufacturing experience.
- Experience with conducting general maintenance on equipment or experience with hydraulic, pneumatic, or electrical systems.
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and blueprints.
- Experience using a computer to enter and track data.
- Exhibit a strong work ethic that includes a good attendance record.
- Ability to write routine reports and correspondences.
- Ability to work a flexible work schedule to include holidays, weekends, and overtime.
- Ability to work in high, precarious places and small or confined spaces.
- Physical Demands: The employee is regularly required to stand, walk, sit; use hands and fingers to handle or feel; reach with hands and arms and climb or balance. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee must frequently lift and/or move up to 50lbs. Specific vision abilities required by this job include close vision.
This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
, About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please emailLead Manufacturing Technician
Posted 3 days ago
Job Viewed
Job Description
Join our team as a Lead Manufacturing Technician! We are seeking candidates with a minimum of 3 years of experience in a production environment to work at our facility in Medina, OH.
As a Lead Technician, you will play a crucial role in training and managing other technicians in the operation of plastic injection blow molders and extrusion machines, ensuring that our products consistently meet high quality standards and exceed customer expectations.
Why you should apply:
Job security - In contrast to other companies, we are expanding our workforce to maintain a robust business, even in uncertain economic conditions.
Opportunities for advancement - We believe in promoting from within, allowing you to build your career with us.
Comprehensive benefits - We offer health and 401k plan options among other benefits.
Your responsibilities as a Lead Manufacturing Technician will include:
Training, developing, and managing technicians to meet operational needs.
Serving as a backup Team Leader as necessary.
Covering for Production Technicians during breaks and lunches.
Inspecting line setups and continuously monitoring production operations.
Troubleshooting and repairing machinery using your mechanical and electrical skills.
Controlling scrap rates and ensuring product reliability and quality through process checks.
Collaborating with the Team Lead on performance evaluations.
Driving progress on safety, quality, scrap, and reliability initiatives.
Performing additional duties as assigned.
What you need to qualify:
A minimum of 2 years of experience in a similar leadership role.
Experience in plastics manufacturing is preferred.
Proficient problem-solving and mechanical troubleshooting skills.
Strong computer skills are required.
Excellent verbal and written communication abilities.
Shifts & Pay: $55k/year
2nd Shift: 3pm-11pm
As a Plastipak Associate, you will enjoy a benefits package that includes:
- Wellness Programs
- Health Insurance, including Medical, Dental & Vision
- Employee Assistance Program
- Life Insurance
- Disability Insurance: Short-Term & Long-Term
- 401(k) Plan with Company Matching and Profit Sharing
- Paid Time Off - 80 hours within the first year and increasing thereafter
- Paid Company Holidays
- Tuition Assistance Program
- Sons and Daughters Scholarship Program
*Some benefits are subject to eligibility requirements
Plastipak is an Equal Opportunity Employer.
Please note that Plastipak collects and stores personal information submitted through this website. For more details, refer to Plastipak's Privacy Policy.
Senior Manufacturing Technician
Posted 3 days ago
Job Viewed
Job Description
Job Description
We are looking for Senior Manufacturing Technicians with at least 3 years of experience in a production environment at our facility in Medina, OH.
Our technicians are responsible for training and managing technicians in operation of plastic injection blow molders and extrusion machines, ensuring our products meet all quality standards and customer expectations.
Why apply?
-
Job security you can count on – While other companies are laying off, we’re hiring to keep our business strong – even during uncertain economic times.
-
Career growth – We promote from within, so you can move up in the company.
-
Benefit Packages – we offer health and 401k plan options
What You’ll Be Doing as a Senior Manufacturing Technician:
-
Train, develop and manage technicians to meet business needs
-
Act as back-up Team Leader as needed
-
Relieve Production Techs for breaks and lunches
-
Inspect line set-ups and continuously monitor operations
-
Troubleshoot & repair machinery using mechanical & electrical skills
-
Control scrap, reliability and quality through process checks
-
Work with Team Lead on the performance evaluation process
-
Drive safety, quality, scrap and reliability action items
-
Other duties as assigned
What's Required to be a Senior Manufacturing Technician?
-
Minimum of 2 years-experience in similar leadership role
-
Experience in Plastics manufacturing
-
Strong problem-solving and mechanical troubleshooting skills.
-
Strong computer skills
-
Strong verbal and written communication skills
Shifts & Pay: $55k/yr
-
2nd: 3pm-11pm
As a Plastipak Associate, you receive a benefits package offering the following:
- Wellness Programs
- Health Insurance Coverage, including Medical, Dental & Vision
- EAP, Employee Assistance Program
- Life Insurance
- Accidental Death & Dismemberment Insurance
- Insurance: Short-Term & Long-Term
- Accidental Insurance
- Critical Illness Insurance
- Hospital Indemnity Insurance
- 401(k) Plan, with Company Matching Contribution & Profit Sharing feature
- Paid Time Off - 80 hours within 1st year & subsequent increases
- Paid Company Holidays
- Dependent Care Flexible Spending Account
- Caregiving via Care.com
- Pet Insurance
- Tuition Assistance Program
- Sons and Daughters Scholarship Program
- Travel Assistance
- Employee Discount Programs
*Some benefits are subject to eligibility requirements
Plastipak is an Equal Opportunity Employer
In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.