48 Quality Control jobs in New Hampshire

• Responsible for a thorough understanding of project drawings and specifications to ensure compliance.
• Review, track, and process, submittals and RFIs, ensuring timely resolution.
• Review and plan construction means and methods with Superintendent.
• Lead pre-activity meetings with all project trades to ensure a thorough understanding of project requirements, by all stakeholders, prior to the start of any new definable feature of work
• Collaborate with Superintendent and project team to plan and sequence phases of work
• Complete daily quality control reports
• Coordinate, schedule, and document all required tests and inspections
• Monitor and inspect ongoing project work, to ensure conformance to contract documents and applicable standards
• Generate, distribute, and track, incomplete work lists, punch lists, and non-conformance notices
• Prepare, maintain, and submit project closeout and record documents
• Mentor the development of junior engineers and provide feedback on performance
• Generate verbal and written communications required to meet administrative requirements of projects
• Monitor the planning for project safety, application of safety rules, regulations, and programs
• Maintain a positive image of the company with vendors, subcontractors, clients and teammates
• Act as primary point of contact for client, subcontractors, vendors, and MC project team, for quality related issues
• Responsible for maintaining and updating project's Quality Control Program. Ensure that program meets contractual requirements, current industry standards and best practices
• Maintain access to applicable reference standards and facilitate access by project team
• Subject matter expert for quality control test and inspection protocols
• Generate and conduct training, relative to QC processes and procedures
• Perform audits of project adherence to QC Program and project specific plans. Record and report results
• Lead investigation into non-conformances, determine root cause, recommend corrective actions, publish non-conformance bulletins

• Minimum 10 years' combined experience within the construction industry, as a Project Superintendent, QC Manager, Project Manager, Project Engineer, and/or Construction Manager required
• Bachelor's degree in civil engineering, Mechanical Engineering or Construction Management preferred
• Experience with project management software (i.e. Procore, CMiC) preferred
• Experience with U.S. Army Corps of Engineers, Construction Quality Management for Contractors, preferred

• Proven ability to excel in a fast-paced environment
• Excellent written and verbal communication skills
• Ability to work independently and as part of team
• Outstanding attention to detail
• Strong interpersonal (tact, diplomacy, influence, motivation) skills
• Ability to work with multiple project teams
• Ability to read and interpret contract language

• Ability to lift 50 pounds
• Ability to stand for extended periods of time, and safely maneuver around the nearby presence of various construction equipment and vehicles, on an active construction site
• Prepared to regularly encounter moving mechanical parts, high precarious places, fumes or airborne particles, and a variety of outside weather conditions
• Able to climb temporary or permanent stairs, and ladders
• Able to bend, squat, kneel, crawl, crouch, balance and stoop, reach on a regular basis
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus

First Shift Location: Manchester, NH Pay Rate: $25 - $29/hour (based on experience) Schedule: Monday - Friday, First Shift Benefits: Full health benefits 100% paid by the company About the Role: We are currently seeking an experienced Quality Control Quality Control, Inspector, Control, Manufacturing, Staffing, Quality

Are you looking for a Quality Control Inspector Role? This position is located in Manchester, NH and is 6 months long - And it could become permanent in the end should they are able to add you to their team. Pay: $20-$5/hr Plastics of Extrusion experience is a huge plus( not required to be considered). Hours - 7:00am - 5:00pm Monday through Friday with a paid lunch - get paid for 10 hours of overtime if you work a full week. Qualified candidates should apply today and connect with Georgia Demers at or call or and speak with Chelsea Gallant. - Responsible for the inspection, assessment, verification/testing, and documentation of process and product quality on all finished goods and ongoing production to the customer and acceptability thereof. Included in these duties are instrument care and documentation. - Follows standard methods and techniques, inspects and tests product to ensure it meets customer and product specification, and alerts production when standards are not met. - Assist in the retention of Customer samples, as required, ensures Quality products and processes: - Understands and supports both quality policies and the Quality System. - Participates in system or quality based training - Understands, reads and interprets prints. - Comprehends and understands measurement procedures for extrusion processes including: Single Lumen, Multi-Lumen, Overcoat, Core, Bump - Knowledge and the ability to use various measurement systems including: Laser Micrometers, Scales, Calipers , Vision Measurement Systems, Gage Pins, Snap Gages -Identifies and corrects, if possible, any potential quality issues throughout the organization. - Quality control techniques as needed. - Documentation and packaging: - Reviews overall SPC and data entry for accuracy - Perform and complete all documentation requirements including certifications and inspection data sheets. - Participates in the GDP, GMP, ISO 9001 and ISO 13485 programs. Pay offered to a successful candidate will be based on several factors including the Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Randstad offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).salary: 20 - 25 per hourshift: Firstwork hours: 7 AM - 5 PMeducation: High SchoolResponsibilities- Responsible for the inspection, assessment, verification/testing, and documentation of process and product quality on all finished goods and ongoing production to the customer and acceptability thereof. Included in these duties are instrument care and documentation. - Follows standard methods and techniques, inspects and tests product to ensure it meets customer and product specification, and alerts production when standards are not met. - Assist in the retention of Customer samples, as required, ensures Quality products and processes: - Understands and supports both quality policies and the Quality System. - Participates in system or quality based training - Understands, reads and interprets prints. - Comprehends and understands measurement procedures for extrusion processes including: Single Lumen, Multi-Lumen, Overcoat, Core, Bump - Knowledge and the ability to use various measurement systems including: Laser Micrometers, Scales, Calipers , Vision Measurement Systems, Gage Pins, Snap Gages -Identifies and corrects, if possible, any potential quality issues throughout the organization. Quality control techniques as needed. - Documentation and packaging: - Reviews overall SPC and data entry for accuracy - Perform and complete all documentation requirements including certifications and inspection data sheets. - Participates in the GDP, GMP, ISO 9001 and ISO 13485 programs.The essential functions of this role include:standing for 9 hours at one timeSkillsQuality ControlInspectionTestingBlueprintscalipersgage pinsProduct InspectionQuality AssuranceQualificationsYears of experience: 2 yearsExperience level: ExperiencedRandstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad.Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.At Randstad, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Randstad offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).This posting is open for thirty (30) days.

DEKA R&D has an immediate opening for and Quality Control Inspector to work in a dynamic Medical Device Research, Development, and Manufacturing company. This position is a highly visible role with significant and direct impact on the development and success of multiple engineering projects.

Responsibilities as a Quality Control Inspector:

• Interpret Mechanical and Electrical print reading and apply to incoming inspection practices
• Operate CMM equipment and utilize various measuring tools for inspection of medical device components
• Communicate effectively across multiple projects to provide feedback on inspection of parts
• Inspect various mechanical and electrical components and assemblies through incoming inspection
• Interpret ASME Y14.5 and GD&T standards throughout the inspection process for compliance and best practices
• Provide feedback on inspection activities to improve efficient whether individually or in a cross-functional setting

• 3+ years of experience in a regulated industry
• Mechanical Engineering degree or Equivalent education/experience
• CMM programming, Metrology and/or CQI certified is a plus
• Ability to read and understand complex GD&T on prints using ASME Y14.5 standards
• Basic GD&T knowledge required, Advanced GD&T knowledge preferred
• Proficient with mechanical measuring equipment such as micrometers, calipers, optical comparator
• Ability to understand and operate CMMs preferred
• Inspection of soldered components and Printed Circuit Board (PCB) assemblies; IPC-A-610 certification preferred
• Computer skills and knowledge; comfortable learning new software (Experience with Jira is a plus)

DEKA R&D has an immediate opening for a Quality Control Inspector to work in a dynamic Medical Device Research, Development, and Manufacturing company. This position is a highly visible role with significant and direct impact on the development and success of multiple engineering projects.

Responsibilities as a Quality Control Inspector:

• Interpret Mechanical and Electrical print reading and apply to incoming inspection practices
• Operate CMM equipment and utilize various measuring tools for inspection of medical device components
• Communicate effectively across multiple projects to provide feedback on inspection of parts
• Inspect various mechanical and electrical components and assemblies through incoming inspection
• Interpret ASME Y14.5 and GD&T standards throughout the inspection process for compliance and best practices
• Provide feedback on inspection activities to improve efficient whether individually or in a cross-functional setting

To be successful as a Quality Control Inspector, you will need the following qualifications:

• 3+ years of experience in a regulated industry
• Mechanical Engineering degree or equivalent education/experience
• CMM programming, Metrology and/or CQI certified is a plus
• Ability to read and understand complex GD&T on prints using ASME Y14.5 standards
• Basic GD&T knowledge required, Advanced GD&T knowledge preferred
• Proficient with mechanical measuring equipment such as micrometers, calipers, optical comparator
• Ability to understand and operate CMMs preferred
• Inspection of soldered components and Printed Circuit Board (PCB) assemblies; IPC-A-610 certification preferred
• Computer skills and knowledge; comfortable learning new software (Experience with Jira is a plus)

About DEKA: One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA's brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored.

POSITION RESPONSIBILITIES/ACCOUNTABILITIES:Inspect inbound produce and perishable products to ensure they meet AG's strict quality, temperature, and freshness guidelines.Evaluate inbound products and make final decisions to accept or reject loads based on quality, temperature, condition, and compliance with AG, USDA/FDA, and organic standards.Monitor warehouse conditions and handling practices to ensure compliance with USDA/FDA regulations and USDA Organic (NOP) standards, preventing contamination or commingling.Review in-house products for quality, rotation, and proper labeling.Verify and maintain organic compliance records, including audit trails and inspection logs.Partner with Purchasing Managers and Buyers to communicate quality trends and vendor performance.Support the warehouse team during recalls and mock recall exercises, ensuring readiness and accuracy.Document inspections, audits, and quality checks according to company policies.Review perishable returns to determine appropriate next steps.Fosters & participates with leadership in a collaborative nature to maintain high food safety standards and suggest improvements.Perform other duties as assigned in support of food safety and compliance.ESSENTIAL SKILLS & EXPERIENCE: High school diploma or equivalent required.Knowledge of perishable products (including floral, preferred).1-3 years of wholesale or retail produce experience.Strong communication skills - both written and verbal - with the ability to work effectively across departments.Comfortable using Microsoft Word, Excel, and Outlook.Ability to work independently while being a reliable team player.Collaboration/strong teamwork.NON-ESSENTIAL SKILLS & EXPERIENCE:USDA certification or USDA produce quality training.Experience with organic compliance, handling, or food safety audits.PHYSICAL DEMANDS & WORK ENVIRONMENT:Ability to lift up to 100 lbsAbility to stand; walk for long periods of timeConstant exposure to cold environmentAbility to sit, crouch, reach above and bend frequentlyAbility to smell, taste and must have color acuityWHY JOIN US?At AG, you'll be part of a team that values food safety, quality, and integrity. We believe in supporting our employees with training, opportunities for growth, and a workplace where your attention to detail and commitment to excellence make a real difference every day. Your decisions directly impact the quality of food our communities receive, giving you a meaningful role in protecting both our customers and our company's reputation. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

DEKA R&D has an immediate opening for a Quality Control Inspector to work in a dynamic Medical Device Research, Development, and Manufacturing company. This position is a highly visible role with significant and direct impact on the development and success of multiple engineering projects.

Responsibilities as a Quality Control Inspector:

• Interpret Mechanical and Electrical print reading and apply to incoming inspection practices
• Operate CMM equipment and utilize various measuring tools for inspection of medical device components
• Communicate effectively across multiple projects to provide feedback on inspection of parts
• Inspect various mechanical and electrical components and assemblies through incoming inspection
• Interpret ASME Y14.5 and GD&T standards throughout the inspection process for compliance and best practices
• Provide feedback on inspection activities to improve efficient whether individually or in a cross-functional setting

To be successful as a Quality Control Inspector, you will need the following qualifications:

• 3+ years of experience in a regulated industry
• Mechanical Engineering degree or Equivalent education/experience
• CMM programming, Metrology and/or CQI certified is a plus
• Ability to read and understand complex GD&T on prints using ASME Y14.5 standards
• Basic GD&T knowledge required, Advanced GD&T knowledge preferred
• Proficient with mechanical measuring equipment such as micrometers, calipers, optical comparator
• Ability to understand and operate CMMs preferred
• Inspection of soldered components and Printed Circuit Board (PCB) assemblies; IPC-A-610 certification preferred
• Computer skills and knowledge; comfortable learning new software (Experience with Jira is a plus)

About DEKA:

One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age.

Behind DEKA's brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored.

• Inspect PCBA/assemblies/RMA using the customer print, applicable Process Instructions and/or IPC-A-610 guidelines.
• Complete Oracle and SFDC transactions for passed and failed lots/units.
• Complete customer Certificates of Compliance as required.
• Ensure that lot rejections are initiated when required. Work with production to assure that all defects have been caught and that all PCBA/assemblies submitted for Final Inspection are acceptable.
• Work with Quality Engineers to update Final Audit Process Instructions as required.
• Verify that Temporary Deviations and Rework Instructions have been properly implemented and/or completed.
• Review the daily hotlist to verify that the area is prioritizing the correct products for inspection.
• Complete First Article Inspections and Engineering Change Order verification as applicable.
• May be asked to assist with audits/other quality department functions.

• Experience with computer software including Oracle, Agile and Microsoft Office preferred.
• Basic understanding of quality concepts including sampling, lot rejections, FAI and Quality Alerts.
• Familiarity with IPC-A-610 standard; current Certification is a plus.
• Process auditing experience a plus.
• Good working knowledge and understanding of manufacturing processes.
• Ability to read and interpret drawings, prints and component datasheets.
• Familiarity with basic measuring instruments, tools and
• Excellent communication skills, both written and verbal.
• Strong attention to detail is required.

Job DescriptionWe're excited to partner with a fantastic company in Manchester that's hiring a Quality Control Inspector!If you have experience in quality inspection, a solid work ethic, and Excel skills, this could be the perfect next step in your career.Location: ManchesterSchedule: Monday - Friday, 7:00 AM - 5:00 PMPay: $20-$22/hrType: Temp-to-PermKey Responsibilities:Inspect and test products to meet customer and product specifications.Report any quality issues and ensure compliance with quality policies.Read and interpret blueprints and measurement procedures.Operate and maintain measurement tools (e.g., micrometers, calipers, vision systems).Verify documentation accuracy and packaging specifications.Maintain a clean, safe work environment.Adhere to GDP, GMP, ISO 9001, and ISO 13485 standards.Support continuous improvement initiatives.Qualifications:Previous quality control experience preferred.Strong attention to detail and problem-solving skills.Basic computer skills (Excel, Word, Outlook, PowerPoint preferred).Self-motivated with strong communication and teamwork skills.Skills & Requirements:Ability to read and follow instructions and reports.Basic math skills, including unit conversionsApply now to take the next step in your career! All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county , to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions. Job Reference: JN -082025-403218