440 Welding Assistant jobs in the United States
Welder Helper- Albert Lea, MN
Job Viewed
Job Description
Reference Number: 3500 Department: Engineering Closing Date: Apply early as this job may be filled at any time. Rate of Pay: $32.08/hourly Most communications will be done electronically. Please check email, including spam folders, daily. Must not have a current attendance status of 1st Offense, 2nd Offense, or Dismissal as per the Union Pacific Attendance Policy. Adhere to the Union Pacific MAPS policy by not having a current status of Training 1, Training 2 or Dismissal. Must not have a current Critical Safety Rule violation. For employees seeking a transfer to a different work location, please refer to Union Pacific's Intracraft Transfer Policy Intracraft Transfer Policy for Operating Craft (Train Crew) Employees (uprr.com). If you wish to request a transfer to a position outside the scope of your collective bargaining agreement, please consult Union Pacific's Intercraft Transfer Policy Intercraft Transfer Policy (uprr.com) . To be eligible for transfer under either policy, employees must have completed two years of continuous service in their current position/craft. However, the two-year requirement does not apply to furloughed employees. Description Become part of a dedicated group of Welder Helpers who have been instrumental in maintaining Union Pacific's railroad tracks for over 150 years! As a Welder Helper, you will actively contribute to the repair, tempering, and cutting of rails, frogs, switches, and other essential welding tasks. Your efforts in repairing or replacing tracks will play a vital role in ensuring the safe and efficient movement of trains, enabling Union Pacific to serve its customers across North America. We are powered by our people, will you join our team? Required Certifications:For this position, you will be required to become a Union Pacific certified driver during your probationary period. To become certified, you must meet the following Motor Vehicle and Medical Requirements: 1. Must be a minimum of 21 years of age 2. Have valid driver's license 3. Have an acceptable driving record per your Motor Vehicle Record (MVR) 4. Acquire your Commercial Driver's License (CDL) if you will be operating a vehicle(s) with a GVWR of 26,000 lbs or greater. If this is required, you will need to obtain your CDL during your probationary period. Medical Requirements:Must meet the medical requirements (also called physical qualifications) for commercial motor vehicle drivers as specified by the US Federal Motor Carrier Safety Administration (FMCSA). The FMCSA physical qualifications for drivers can be found on the FMCSA homepage. Health and Medical Services at Union Pacific Railroad will make the final determination on whether or not an individual meets the FMCSA medical qualifications, and may add additional medical requirements to assure the person can safely perform job tasks, with or without accommodation. Accountabilities Perform track maintenance activities such as repairs, installations, and component removals as required. Utilize load/unload devices to handle and transport track materials and equipment. Monitor track conditions for any issues or defects, while also observing the right-of-way and passing trains for any shifted loads or spillages. Operate equipment safely and efficiently to drive spikes, tighten or loosen track bolts, and utilize pullers to remove spikes. Maintain the trackbed by replacing and compacting ballast, as well as assisting in unloading ballast from ballast cars. Foster positive relationships with colleagues, supervisors, contractors, and customers, and effectively manage conflicts when they arise. Ensure compliance with all safety rules, operational guidelines, and regulations set by the Federal Railroad Administration (FRA). Carry out additional assigned duties as necessary. Qualifications - Required Possess a current and valid driver's license. Hold a Commercial Driver's License (CDL) of either Class A or Class B, or have the ability to obtain one during the probationary period. Capable of comprehending and interpreting regulations and instructions. Demonstrates strong verbal and written communication skills to effectively convey information to colleagues and supervisors. To be considered for this position, candidates are required to successfully complete an assessment in English before proceeding to the interview stage. For more information go to the FAQs on UP.jobs. Qualifications - Preferred Valid Commercial Driver's License (CDL) - Class A or Class B. Minimum of 1 year experience in Railroad Maintenance of Way work. Demonstrated experience working outdoors in diverse weather conditions, including professional, personal, or volunteer work. Proficiency in working within a construction-type environment, gained through professional, personal, or volunteer experience. Skilled in operating heavy equipment such as construction or farm machinery, with relevant experience in professional, personal, or volunteer capacities. Proficiency in welding or possession of a welding certificate, gained through professional, personal, or volunteer experience. Flexibility and willingness to work on-call, overtime, various shifts (including weekends and holidays), and up to 7 days a week. Physical and Mental Job Requirements To be considered for employment, candidates must successfully pass a Physical Ability Test (PAT). Please note that this test is separate from the medical exam. For additional details, refer to the FAQs on UP.jobs. Physical Stamina: Capable of performing physically strenuous work continuously. Occasionally, bending, stooping, and kneeling may be necessary. Manual Dexterity: Must possess manual dexterity with eye-hand coordination, allowing for precise and coordinated movements. Lifting and Carrying: Occasionally, there is a need to lift and carry objects weighing up to 65 lbs. Additionally, pushing and pulling objects weighing up to 119 lbs may be required. Balance and Mobility: There may be occasions when climbing ladders is necessary to access truck storage. The ability to walk frequently and maintain balance on various surfaces is essential. Prolonged Standing: The job requires the ability to remain standing for more than half of each workday. There will be periodic opportunities to change positions for comfort. Work Conditions Minimum age requirement: Applicants must be at least 21 years old. Must be legally authorized to work in the United States without requiring company sponsorship. Comfortable working in close proximity to large equipment, including railcars, locomotives, and cranes. Preference given to candidates who are willing to reside and work in specific locations indicated in the job listing. Strong commitment to practicing and maintaining safe work practices. Flexibility in terms of travel: Candidates should be prepared for extensive travel across Union Pacific's 23-state system, which may be required at short notice. What we offer: A strengths-based, engagement-focused, and performance-oriented culture Ongoing learning, development, and Educational Assistance (including little to no out-of-pocket cost for online and in-person courses at the University of Nebraska at Omaha) 401(k) retirement plan Employee Stock Purchase Plan with 20% match up to 5% Medical, dental and vision insurance, which are collectively bargained for through union membership Wellness and Employee Assistance Programs
Job No Longer Available
This position is no longer listed on WhatJobs. The employer may be reviewing applications, filled the role, or has removed the listing.
However, we have similar jobs available for you below.
Welding Assistant
Posted 1 day ago
Job Viewed
Job Description
Welding Assistant. Location: Pensacola, FL32592 Schedule: 40 hours/week (overtime available)Pay: $17.00/ hrly. Overtime and benefits included. Position Overview. Sirius Staffing is seeking a Welding Assistant to join our client's team at a shipyard f Welding, Assistant, Transportation, Staffing, Manufacturing
Welding Assistant
Posted 2 days ago
Job Viewed
Job Description
Join to apply for the Welding Assistant role at Isle of Wight County Schools
1 week ago Be among the first 25 applicants
Join to apply for the Welding Assistant role at Isle of Wight County Schools
Isle of Wight County Schools is seeking an Instructional Assistant - Welding for the school year. Candidates must have an Associates Degree, completion of 60 college credit hours, or has passed the Praxis Paraprofessional Assessment.
Hourly rate of pay will be based on the FY 26 Compensation Plan.
This is a 10-month position.
Come join our team!
- Seniority level Entry level
- Employment type Full-time
- Job function Management and Manufacturing
- Industries Primary and Secondary Education
Referrals increase your chances of interviewing at Isle of Wight County Schools by 2x
Sign in to set job alerts for Welder roles. $2500 SIGN ON BONUS FREE ATDM 16-WEEK WELDER TRAINING PROG IN DANVILLE, VA ( PROGRAM IS UNPAID) WELDER/STRUCTURAL TRAINEE - COMPLETE 3 WEEKS OF FREE TRADES TRAINING OR HAVE A CURRENT CERTIFICATIONNewport News, VA $3,604.00- 59,800.00 2 weeks ago
Experienced MIG/TIG Welder Defense & Industrial Fabrication 1st Class Pipe Welder - Weld America (Job ID: 969) Welder (Tech Subject Matter Expert)- 23848Newport News, VA 59,150.00- 65,852.00 1 month ago
Welder Foreman - Steel America (Job ID: 960)Portsmouth, VA 42,250.00- 56,000.00 2 months ago
WELDER/STRUCTURE TRAINEE - 3 WEEK UNPAID PROGRAM (11:00PM-7:00AM) 2500 SIGN ON BONUS FREE ATDM 16-WEEK WELDER TRAINING PROG IN DANVILLE, VA ( PROGRAM IS UNPAID)Were unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-LjbffrWelding Assistant
Posted 2 days ago
Job Viewed
Job Description
Location: Pensacola, FL 32592 Schedule: 40 hours/week (overtime available) Pay: $17.00/hrly. Overtime and benefits included
Position OverviewSirius Staffing is seeking a welding assistant to join our clients team at a shipyard facility. In this role, you will work closely with a shipfitter to support vessel construction and assembly. Youll be responsible for preparing tools and materials, assisting with measurements, and tacking structural components in place before welding. This is a hands-on role requiring attention to detail, teamwork, and a strong commitment to safety.
Key Responsibilities- Assist shipfitters with measurements, material movement, and setup.
- Pull welding leads, gather tools, and prepare work areas.
- Use electrodes to tack structural components prior to welding.
- Support with lifting, aligning, and holding materials in place.
- Mark reference lines with scribes as needed.
- Operate grinders, torches, and other basic hand/power tools safely.
- Perform work in varied environments, including elevated heights and confined spaces (1824 openings).
- Follow all safety procedures, including use of PPE and fall protection.
- Assist with general shipyard duties as needed, including cleanup and team support.
- Frequent standing, walking, bending, squatting, and reaching.
- Carry welding leads (up to 45 lbs. when coiled) and other materials.
- Occasional lifting up to 50 lbs. (two-person lift or assistance required for heavier loads).
- Ability to work in elevated, confined, or restricted spaces.
Employee-provided:
- Welding shield
- Steel-toe boots
Provided by client:
- Grinders, drop lighting, chain falls, ladders, power tools
- Safety equipment (hard hat, safety glasses, respirator, fall protection)
- Torch with hose, soapstone, gloves, ventilation blowers, and other necessary tools
- Standard: 40 hours/week
- Overtime: Available beyond 40 hours
- Breaks: 10-minute paid morning break + 30-minute unpaid lunch
- Mandatory PPE: hard hat, safety glasses, ear plugs, steel-toe boots
- Respirators and fall protection used in designated areas
- Employees must inspect safety gear before use and comply with OSHA and client safety policies
Transportation: Employees are responsible for arranging their own transportation to and from the shipyard.
EEO Equal OpportunitySirius Staffing is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to characteristics such as race, color, national origin, religion, gender, age, marital status, disability, veteran status, citizenship status, sexual orientation, gender identity, or any other status protected by law.
Welding Assistant TWG
Posted 1 day ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG
Welding Assistant TWG
Posted 1 day ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG
Welding Assistant TWG
Posted 1 day ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG
Welding Assistant TWG
Posted 1 day ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG
Be The First To Know
About the latest Welding assistant Jobs in United States !
Welding Assistant TWG
Posted 1 day ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG
Welding Assistant TWG
Posted 2 days ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG
Welding Assistant TWG
Posted 2 days ago
Job Viewed
Job Description
We are hiring Entry-Level Welders for immediate job openings. This is a great opportunity to join a growing team and build your welding career. Candidates must have basic welding experience and be ready to work in a fast-paced environment.
Responsibilities:
Perform MIG, TIG, or Stick welding based on job requirements
Read and interpret blueprints or technical drawings
Inspect finished welds for accuracy and quality
Follow all safety procedures and maintain a clean work area
Assist with general fabrication and assembly tasks as needed
Requirements:
Prior welding experience (school, apprenticeship, or on-the-job)
Ability to read basic blueprints or welding diagrams
Reliable and punctual with a good work ethic
Able to lift up to 50 lbs and stand for extended periods
High school diploma or GED preferred
Benefits:
Weekly pay
Overtime opportunities
On-the-job training and growth potential
Apply today to start immediately!
TWG