9,721 Circuit Design jobs in the United States

**Be visionary**
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.
**Job Description**
The purpose of this job is to design analog circuitry to probe and amplify high speed serial signals for analysis, to measure and characterize analog components or analog subsystems, to document measured performance and compare to design goals, and to review and guide PCB layout to ensure analog circuitry can perform as designed.
**Detailed Duties and Responsibilities:**
**Design analog circuits for probing and amplifying high speed serial data:**
+ Design high speed amplifier subsystems using off the shelf amplifiers
+ Design Bias-T networks with wide bandwidth
+ Design passive equalizers and filters using discrete components
+ Design signal envelope detectors
+ Simulate these designs using Keysight ADS and optimize the component selections as well as layout optimizations
**Measure and characterize HW subcomponents for SI performance:**
+ Measure PCB components using VNA and gather s-parameter data
+ Simulate and publish s-parameter performance to validate if design meets performance target
+ Measure clock jitter with oscilloscope and validate if jitter performance is met
+ Measure power nets with oscilloscope to validate if PDN performance meets expectations
**Perform serdes channel simulations using IBIS AMI models on Keysight ADS software:**
+ Validate Serdes performance can meet target BER
+ Identify optimal TX EQ and RX EQ settings for maximum performance
+ Quantify channel operating margin
**Required Education, Skills and Experience:**
+ Bachelors degree in Electrical Engineering or similar applicable degree
+ 2-5 years minimum experience in an Analog design role
+ Experience with ANSYS HFSS
+ Experience with Keysight ADS
+ Strong interpersonal, organizational and communication skills
+ Team player, persuasive, encouraging, and motivating
+ Open minded, quick learner, creative, likes challenges
**Preferred Qualifications:**
+ Familiar with lab equipment including, oscilloscope, Bert, and VNA
+ Familiarity with at least one high speed interface such as PCI Express, Ethernet or USB
+ Familiarity with channel simulation tools like Seasim or COM
+ Familiarity with Matlab usage for Serdes tuning
+ Masters degree or higher preferred
+ 5-10 years in an Analog Design role
**Salary Range:**
$177,500.00-$236,600.000
**Pay Transparency**
The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position.
Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.
Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.
You may not realize it, but Teledyne enables many of the products and services you use every day **.**
Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Description
Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Come work at Amazon!
The Role:
As Senior Analog Circuit Design Engineer, you will engage with an experienced cross-disciplinary staff to conceive and design innovative product solutions. You will work closely with an internal inter-disciplinary team, and third-party suppliers to drive key aspects of product definition, execution and optimization. You must be responsive, flexible and able to succeed within an open collaborative peer environment.
As a member of the RFIC team, you will be responsible for the architectural definition, design, simulation, layout, and extracted simulation for analog blocks including bandgaps, op-amps, precision current mirrors, temperature/process compensation techniques, LDOs, VGAs, baseband filters, etc. Strong focus will be on creating power and cost optimized solutions for a given system performance.
Export Control Requirement:
Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
 Explore architectures for high performance analog sub-systems and make detailed presentations on power/area/performance trade-offs.
Design & optimize the above circuit blocks in deeply scaled CMOS/SiGe/SOI processes.
erform circuit layout, parasitic extraction, and run extracted simulation across various corners to make sure designs are robust and can be taken to volume production.
ollaborate with the digital design team to define analog/digital boundary requirements for circuit calibration.
pecify bench and production test plans for your designs.
Basic Qualifications
achelor's/Master's degree in Electrical / Communications Engineering or related field.
+ years of experience in analog circuit design, preferably in an advanced node.
roven track record where products have gone to volume production.
Preferred Qualifications
0+ years of hands-on experience in low-power analog circuit design.
trong technical background in some of the following:
o Sub-1V and traditional bandgap architectures, curvature correction methods, startup circuit designs
o Advanced LDO regulators including low-noise, PSRR optimization, stability across load conditions.
o Advanced baseband VGAs, TIAs, and op-amp design including feedback and compensation techniques
o Expertise in low-power current/voltage mode techniques for complex pole analog filters (e.g. Sallen-Key, multi-feedback, trans-linear loops, Tow-Thomas, etc)
o Solid understanding of analog design and layout techniques (bias, matching)
o Strong understanding of the implementation of behavioral models for such circuits.
o Strong ability to solve simulation accuracy, speed and capacity issues.
o Knowledge of the Cadence Virtuoso Design Framework, Virtuoso Schematic Editor, and Analog Design Environment (Explorer/Assembler), including flow automation and custom netlisting with SKILL.
trong written and verbal skills.
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company's reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $143,300/year in our lowest geographic market up to $247,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit . This position will remain posted until filled. Applicants should apply via our internal or external career site.

Our client is seeking a talented and experienced Lead Analog Circuit Design Engineer to join their innovative R&D department in Fort Worth, Texas . The ideal candidate will have a proven track record of designing complex analog and mixed-signal integrated circuits for high-performance applications. You will be instrumental in driving the architectural definition and execution of next-generation semiconductor devices, working with state-of-the-art technologies. This role offers the chance to shape the future of electronic components and work within a collaborative, growth-oriented environment.

Key Responsibilities:

• Lead the conceptualization, design, simulation, and verification of high-speed analog and mixed-signal circuits, including amplifiers, data converters (ADC/DAC), PLLs, and voltage regulators.
• Develop robust circuit architectures and define critical performance metrics for new IC designs.
• Oversee the entire design flow from schematic capture and simulation to layout guidance and post-silicon validation.
• Collaborate with system architects, digital designers, and validation engineers to ensure seamless integration of analog IP into complex SoCs.
• Perform detailed analysis of circuit performance, noise, linearity, and power consumption.
• Guide and mentor junior analog design engineers, fostering a culture of technical excellence and innovation.
• Utilize advanced EDA tools for simulation (e.g., Spectre, HSPICE, Eldo) and layout (e.g., Virtuoso).
• Develop and execute comprehensive verification plans to ensure first-pass silicon success.
• Analyze silicon test results and provide feedback for design improvements and future technology nodes.
• Contribute to the definition of future product roadmaps and technology development initiatives.

Qualifications:

• Master's or Ph.D. in Electrical Engineering or a related discipline.
• 10+ years of hands-on experience in analog and mixed-signal IC design.
• Demonstrated expertise in designing key analog blocks such as LDOs, ADCs, DACs, SerDes, or PLLs.
• Proficiency in cadence design tools (Spectre, Virtuoso) and scripting languages (Perl, SKILL).
• Deep understanding of semiconductor physics, device modeling, and layout parasitics.
• Experience with advanced CMOS process technologies.
• Strong analytical and problem-solving skills with a meticulous attention to detail.
• Excellent communication and interpersonal skills, with the ability to effectively lead and collaborate with cross-functional teams.

Join us in Fort Worth, Texas , and be a part of groundbreaking technological advancements in the semiconductor industry.

Our client is seeking a highly experienced Senior Analog Circuit Design Engineer to join their innovative engineering team in **Oklahoma City, Oklahoma, US**. This hybrid role offers the flexibility of remote work with the collaboration benefits of in-office presence. You will be responsible for the design, simulation, and verification of complex analog and mixed-signal integrated circuits for a variety of cutting-edge applications, including high-speed communication systems, power management, and sensor interfaces. Your expertise will be crucial in developing robust, high-performance circuits that meet stringent specifications and push the boundaries of technological innovation.

Key Responsibilities:

• Lead the design and development of analog and mixed-signal ICs from concept to production.
• Perform circuit simulations using industry-standard tools (e.g., Cadence Virtuoso, SPICE variants).
• Develop and implement robust verification methodologies to ensure design accuracy and performance.
• Collaborate closely with layout engineers to ensure optimal physical implementation of circuit designs.
• Work with system architects and digital design teams to define interfaces and ensure seamless integration.
• Analyze and troubleshoot design issues encountered during simulation, silicon bring-up, and production testing.
• Mentor junior engineers and contribute to the technical growth of the team.
• Contribute to the development of design flows, methodologies, and intellectual property.
• Prepare technical documentation, including design specifications, test plans, and performance reports.
• Engage in project planning and provide technical guidance to project management.
• Stay updated with the latest advancements in analog circuit design, semiconductor technology, and relevant industry standards.

Qualifications:

• Master's degree or Ph.D. in Electrical Engineering or a related field.
• Minimum of 7 years of hands-on experience in analog and mixed-signal IC design.
• Proficiency in Cadence design tools, SPICE simulators, and verification environments.
• Strong understanding of device physics, semiconductor processes, and fabrication technologies.
• Experience with various analog blocks such as LDOs, ADCs, DACs, PLLs, amplifiers, and data converters.
• Excellent analytical and problem-solving skills.
• Strong communication and teamwork abilities.
• Familiarity with scripting languages (e.g., Perl, Python) for automation is a plus.
• Experience with high-speed design techniques and signal integrity analysis is desirable.
• Ability to work effectively in both remote and in-office settings within **Oklahoma City, Oklahoma, US**.

This is an exceptional opportunity to contribute to groundbreaking projects and advance your career in a collaborative and forward-thinking environment.

**Job Description**
Are you a Power Electronics Design Engineer with 7 to 20 years of experience looking for the next step to grow your career? Do you want to design technology leading products that really matter and be a part of a cause greater than yourself? The Controls and Avionics Solutions (CAS) business is experiencing unprecedented growth. Our two design centers in Endicott, New York and a new state of the art development center in Austin, Texas are the home for our next generation technical solutions. Engineers will develop flight and mission-critical products for more than 170 commercial and military customers.You will have the opportunity to help design and develop the next generation: Fly-By-Wire Flight Controls, Aircraft Engine Controls, Ground Vehicle Power Management Systems, Aircraft Electrification Systems, Advanced Air Mobility Systems, Autonomous Flight Systems, Flight Deck Systems, Cabin Management Systems, Weapon Control Systems, and Mission Systems for the world's most prominent commercial and military aircraft and vehicle manufacturers.
Candidates for this position can expect to work in mid-size teams that are cooperative, dependable, and supportive, working both co-located in a hybrid environment and geographically distributed.
When you become a member of our team, you will work across multiple disciplines and collaborate with Systems, Hardware, Software, Test, and Operations during all phases of the Product Development Lifecycle. At BAE Systems, we promote a strong, collaborative culture and provide our employees with the tools, skills and training they need to succeed. We are all about trust, camaraderie, and a shared mission on delivering world class products to our commercial and military customers. We offer a flexible hybrid work environment and 9/80 work schedule. Our company is part of the community, and driven to improve our future and protect our freedom.
These roles involve a combination of collaborative/in-person and independent work and will take the form of a hybrid work schedule, with time split between working onsite and remotely.
**_Whether you are an experienced Engineer or someone early in their engineering career looking to develop this position can offer opportunities for both._**
**As a Hardware Design Engineer you will make impacts in the following ways;**
+ Design, developing and production following of high-power electronics control and propulsion systems used in hybrid and electric aircraft, heavy-duty vehicles and vessels across the globe.
+ Conduct research, design, development, and testing of information processing hardware such as computer chips, circuit boards, computer systems, and electrical components.
+ Design new or modify existing products, develop technical specifications for production, analyze hardware configuration and processing solutions, and test hardware conformance to specifications.
**Engineers at our Endicott NY and Austin TX locations support the following two Business Area s**
Controls & Avionics Solutions (CAS):
In Controls & Avionics Solutions, you will have the opportunity to help define and develop the next generation of avionics whether it is fly-by-wire flight controls, full authority digital engine controls, or power management & propulsion for future aircraft.
& Propulsion Solutions (PPS):
In Power & Propulsion Solutions, we re involved with everything from providing efficient, power management on military vehicles to developing eco-friendly, hybrid and electric systems for the commercial world. Be part of a team that is helping to keep the air we breathe much cleaner.
Heavy Duty Commercial Vehicles | BAE Systems ( Education, Experience, & Skills**
+ BSEE Degree
+ 6 or more years' experience in Hardware Design Engineering or Product Support Engineering
+ Experience in power electronics related design and development, including familiarity with DC/DC Converters, motor drives, gate drivers, analog circuitry, and magnetics
+ Motivated self-starter who has the ability to work effectively in team environment
+ Technical writing skills: capable of creating required engineering documentation.
**Preferred Education, Experience, & Skills**
+ BSEE Degree or higher
+ Experience in power electronics related design and development, including familiarity with DC/DC Converters, motor drives, gate drivers, analog circuitry, and magnetics
+ Experience with design of DC DC converters and motor drives with power levels of up to 500kW and DC link voltages to 1000V or higher
+ Experience in full lifecycle development including component level requirements and design, component and system-level integration, validation, and verification
+ Ability to work with software and firmware-controlled power converters and power systems
+ Experience working in a high voltage / high power lab environment
+ Experience with design analysis tools such as PSPICE, MathCad
**Pay Information**
Full-Time Salary Range: $ - $
Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
**Power Electronics Circuit Design Engineer**
** BR**
EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

**Description:** Join Our Team as a **Circuit Design Engineer** where you will work on the development of a sophisticated state-of-the-art avionics product in a world class Integrated Product Development environment.
Location: **This position does not support teleworking** ; the preferred candidate will be located near our Lockheed Martin Space facility at one of the Coolest places to work: Littleton, CO .
- - -
**About Lockheed Martin Space**
Space is a critical domain, connecting our technologies, our security, and our humanity. While others view space as a destination, we see it as a realm of possibilities, where we can do more - we can innovate, invest, inspire, and integrate our capabilities to transform the future.
At Lockheed Martin Space, we aim to harness the full potential of space to cultivate innovation, reduce costs, and push the boundaries of what technology can achieve. We're creating future-ready solutions, focusing on resiliency and urgency through our 21st Century Security® vision. We're erasing boundaries and forming partnerships across industries and around the world. We're advancing spacecraft and the workforce to fuel the next generation. And we're reimagining how space can connect us, ensuring security and prosperity. Join us in shaping a new era in space and find a career that's built for you.
- - -
**What does this role look like?**
- Join us at Lockheed Martin as an Electronics Engineer where you will develop and design for Analog and Power hardware, providing you with tremendous career growth potential along with meaningful assignments to stretch and hone your expertise.
- - -
**Key activities you will accomplish in this role:**
- Create schematic diagrams for circuits.
- Select appropriate components (resistors, capacitors, ICs, etc.).
- Ensure functionality, performance, and power efficiency.
- Simulate circuits using tools like SPICE or MATLAB to validate behavior.
- Perform design reviews to identify issues related to thermal management, EMI (electromagnetic interference), and manufacturability.
**To be effective in this role, you will need:**
- 5+ years of professional experience with a Bachelor's; or 3+ years of professional experience with a Master's degree.
- - -
**Why Lockheed Martin?**
Our employees play an active role in strengthening the quality of life where we live and work by volunteering more than 850,000 hours annually.
Learn more about Lockheed Martin's comprehensive benefits package .
Find out more on how we proudly support Hiring Our Heroes .
At Space we value your skills, training, and education. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach - and yours as a Lockheed Martin Space employee. join us to experience your future!
**Let's do Space!**
**Basic Qualifications:**
- Bachelor of Science or higher from an accredited college in Electrical Engineering or related discipline, or equivalent experience/combined education.
- Experience with design of analog and power circuits.
**Desired Skills:**
- Experience or coursework on space grade design and/or missile defense missions.
- Experience in electronic systems schematic creation and interpretation, and Electronics Modeling/Simulation Tools such as SPICE.
- Experience in schematic capture using Altium, Zuken or similar tools.
- Experience with PSPICE, Saber or other electronics simulation tools.
- Experience performing electronics analysis (Worst Case Analysis, Electrical Parts Stress Analysis, Failure Modes and Effects Critical Analysis
- Demonstrated good communication and presentation skills with the ability to articulate complex technical issues to peers, management, subcontractors and customers.
- Demonstrated ability to work in a fast-paced, dynamic, collaborative team environment and to build consensus among peers and effective relationships with team members.
**Clearance Level:** None
**Other Important Information You Should Know**
**Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
**Ability to Work Remotely:** Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
**Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
**Schedule for this Position:** 9x80 every other Friday off
**Pay Rate:** The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $93,200 - $164,450. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. **Benefits offered:** Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible.
**Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.**
**The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.**
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
**Experience Level:** Experienced Professional
**Business Unit:** SPACE
**Relocation Available:** Possible
**Career Area:** Electrical Engineering
**Type:** Full-Time
**Shift:** First

**Please Note:**
**1. If you are a first time user, please create your candidate login

**Job Details:**
**Job Description:**
**Do Something Wonderful!**
Intel put Silicon in Silicon Valley. No one else is obsessed with engineering and have a brighter future. Every day, we create world changing technology that enriches the lives of every person on earth. So, if you have a big idea, let's do something wonderful together. Join us, because at Intel, we are building a better tomorrow.
**Who We Are**
The Atom CPU Circuit Technology team is looking for a highly motivated and technically savvy individual to join our team as Digital Circuit design engineer to work on full custom and memory circuits. This will be a fast-paced dynamic environment where you will work in the high performance, low power CPU design group on a wide spectrum of circuit activities ranging from technical readiness, device and/or cell characterization, bit-cell simulations, critical path simulations and design custom blocks to meet stringent Power/Performance/Area constraints.
**Who You Are**
This role is in the CPU Circuit Design Engineer. Your responsibilities will include, but are not limited to:
+ Designs, develops, and builds custom digital circuits for a CPU, including memory and caches.
+ Designs floorplans, performs circuit design, schematic entry, simulation for CPU blocks, and verify functionality to optimize custom circuit for CPU power, performance, area, timing, and yield goals.
+ Creates block level DFT models, develops memory test tools, and improves and automates flows and methodologies to ensure streamlining of design.
+ Collaborates cross functionally to report design progress and to collect, track, and resolve any performance and CPU design issues.
+ Optimizes performance, power, and area, reduce leakage of CPU circuits, and drives characterization of individual memory instances and memory compilers.
+ Works with CPU architecture and layout teams to design circuit for best functionality, robustness, and electrical capabilities.
**Qualifications:**
You must possess the minimum education requirements and minimum required qualifications to be initially considered for this position. Relevant experience can be obtained through schoolwork, classes, project work, internships, and/or military experience. Additional preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
**Minimum Qualifications**
+ Master's Degree in Electrical Engineering and/or Computer Engineering or any STEM related degree -OR- Bachelor's Degree in Electrical Engineering and/or Computer Engineering or any STEM related degree with 1+ years of experience in a high-tech company and experience in the following areas:
+ Complementary MOS (CMOS) circuits design
+ Digital logic and optimization
+ Circuit design trade-offs for power, performance and area.
+ Very Large-Scale Integration (VLSI)
**Preferred Qualifications**
+ Memory design experience
+ Low power implementation techniques
**Job Type:**
College Grad
**Shift:**
Shift 1 (United States of America)
**Primary Location:**
US, Texas, Austin
**Additional Locations:**
**Business group:**
The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them.
**Posting Statement:**
All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.
**Position of Trust**
N/A
**Benefits:**
We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here:
Salary Range for jobs which could be performed in the US:
$115,290.00-$162,760.00
**S** **al** **ary** **range** **dependent on a number of factors including location and experience.**
**Work Model for this Role**
This role will require an on-site presence. * Job posting details (such as work model, location or time type) are subject to change.

**Job Details:**
**Job Description:**
**Do Something Wonderful!**
Intel put the Silicon in Silicon Valley. No one else is this obsessed with engineering a brighter future. Every day, we create world changing technology that enriches the lives of every person on earth. So, if you have a big idea, let's do something wonderful together. Join us, because at Intel, we are building a better tomorrow.
**Who We Are**
The Atom CPU Circuit Technology team is looking for a highly motivated and technically savvy individual to join our team as Digital Circuit design engineer to work on full custom and memory circuits. This will be a fast-paced dynamic environment where you will work in the high performance, low power CPU design group on a wide spectrum of circuit activities ranging from technical readiness, device and/or cell characterization, bit-cell simulations, critical path simulations and design custom blocks to meet stringent Power/Performance/Area constraints.
**Who You Are**
Your responsibilities are as follows but not limited to:
+ Designs, develops, and builds custom digital circuits for a CPU, including memory and caches.
+ Designs floorplans, performs circuit design, schematic entry, simulation for CPU blocks, and verifies functionality to optimize custom circuit for CPU power, performance, area, timing, and yield goals.
+ Creates block level DFT models, develops memory test tools, and improves and automates flows and methodologies to ensure streamlining of design.
+ Collaborates cross functionally to report design progress and to collect, track, and resolve any performance and CPU design issues.
+ Optimizes performance, power, and area, reduce leakage of CPU circuits, and drives characterization of individual memory instances and memory compilers.
+ Works with CPU architecture and layout teams to design circuit for best functionality, robustness, and electrical capabilities.
**Qualifications:**
You must possess the below minimum education requirements and minimum required qualifications to be initially considered for this position. Relevant experience can be obtained through schoolwork, classes, project work, internships, and/or military experience. Additional preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
**Minimum Qualifications**
+ Bachelor's Degree in Electrical Engineering and/or Computer Engineering or any STEM related degree with 6+ years of experience in a high-tech company
+ OR Master's Degree in Electrical Engineering and/or Computer Engineering or any STEM related degree with 3+ years of experience in a high-tech company
+ OR PhD in electrical engineering and/or computer engineering or any STEM related degree with 2+ years of experience in a high-tech company.
+ 2+ years of hands-on expertise and strong fundamentals in the following areas: Complementary MOS (CMOS) circuits design. Digital logic and optimizations. Circuit design trade-off for power, performance and area. Very Large-Scale Integration (VLSI). Low power implementation techniques. Memory design experience.
**Job Type:**
Experienced Hire
**Shift:**
Shift 1 (United States of America)
**Primary Location:**
US, Texas, Austin
**Additional Locations:**
**Business group:**
The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them.
**Posting Statement:**
All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.
**Position of Trust**
N/A
**Benefits:**
We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here:
Salary Range for jobs which could be performed in the US:
$177,200.00-$250,160.00
**S** **al** **ary** **range** **dependent on a number of factors including location and experience.**
**Work Model for this Role**
This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. * Job posting details (such as work model, location or time type) are subject to change.