1,612 Composites Technician jobs in the United States

Description

WORK LOCATION: San Luis Obispo, CA

FLSA STATUS: Non-Exempt

SALARY RANGE: The anticipated salary range for this role is $23.00 to $43.00 per hour. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate’s qualifications, experience, geographical location, and internal alignment.

SUMMARY 

Edge Autonomy is looking for Composites Technicians, this role combines hands-on skills with a strong knowledge of materials including their proper handling and required personal protective equipment. Due to growth in our business, we have a variety of positions available ranging from entry level Technicians to advanced; salary is based on a skills assessment.

RESPONSIBILITIES

The following job functions are a basic requirement but are not limited to and may be assigned other duties.

• Follow shop safety requirements and other relevant policies
• Complete production documentation to ensure accuracy and completeness
• Fabricate, layup, trim, finish, or paint composite parts per production documentation
• Maintain production tooling following verbal and written instructions
• Support improvement of processes and procedures
• Support Engineering development as needed
• Support problem solving activities for technical issues
• Support the development and training of other team members

REQUIRED QUALIFICATIONS

The following are a non-exhaustive list of qualifications for the position:

• High School Diploma/GED
• Respirator use for up to eight (8) hours a day
• Standing for two (2) consistent hours at a time
• Ability to lift 50lbs
• Experience in a fabrication, assembly, manufacturing, or engineering environment
• Ability to read and follow schematics, drawings, procedures, etc.
• Ability to solve problems
• Able to work together on a team
• The ability to follow verbal and written procedures, good communication skills
• Willingness to learn, ask questions, and listen to others
• Safety and quality minded, strong attention to detail

PREFERRED QUALIFICATIONS

• Experience with composites, resins, adhesives, coatings, measurement tools
• Experience crafting, woodworking or assembly
• Familiarity with engineering documentation and geometric dimensioning and tolerancing
• Experience planning, supervision, and coordination
• Familiarity with Personal Protective Equipment (PPE)
• Computer literacy
• Any experience with process tracking documentation

EDGE AUTONOMY BENEFITS

• Matching 401(k)
• Paid PTO
• Paid holidays
• Medical, vision, and dental insurance
• Group Short-Term & Long-Term Disability
• HSA and FSA Options
• Critical Care Plan
• Accident Care Plan

HIRING REQUIREMENTS

If an offer of employment offer is extended, applicant must have the ability to pass a background check and the ability to be insured by the Company’s Auto-policy. An Offer of Employment is contingent upon the results.

CLEARANCE REQUIREMENTS

This position may require access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person’s status.

EDGE AUTONOMY IS AN EQUAL OPPORTUNITY EMPLOYER

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Edge Autonomy is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact

Continued employment remains on an “At-Will” basis.

COMPOSITES TECHNICIAN

We are hiring 3 technicians to join our team.

Location: Bingen, WA

Full Time, On-site

Core Schedule: 2 Options

• Monday-Friday | 7:30 AM - 4:00 PM (40 hours/week)
• Monday-Friday | 8:00 AM - 4:30 PM (40 hours/week)

About Zepher Flight Laboratories, Inc. (ZFL): We are an engineering and manufacturing company focused on the development of uncrewed and autonomous aerial vehicles (UAVs). ZFL's mission is to enable the widespread use of drones by creating products that can scale in both manufacturing and operations.

Zepher Flight Laboratories, Inc. (ZFL) is developing the "Z1", a 55 pound, 14-foot span VTOL drone that is powered by hydrogen fuel cells. ZFL received a government contract in 2020 to create the Z1 prototype, and a second contract in 2022 to productize and deliver test articles to the U.S. Military. ZFL relies upon engineers, technicians, and operators who are able and willing to make this next phase of the program a success. ZFL employees must have a good combination of skill, industry knowledge, curiosity, and drive to solve problems effectively and quickly.
Summary of Position:

The Composite Technician is a skilled technician who primarily performs hands-on manufacturing and production-level composite fabrication, following work instructions and procedures to lay up, trim, bond, and assemble composite structures and components . This role requires a strong attention to detail and experience working with composite materials and equipment. The Composite Technician reports to the Director of Operations and collaborates closely with team members to meet production schedules and maintain high standards of workmanship.
Essential Duties and Responsibilities :

Reporting to the Director of Operations, the Composites Technician shall have/perform:

• Composites Fabrication: Perform manual lay-up of carbon fiber pre-preg materials into molds following established work instructions and engineering drawings. Prepare and bag parts for curing processes (e.g., oven or autoclave). Trim composite parts to specified dimensions using cutting tools and precision instruments. Bond composite subassemblies using adhesives, fasteners, and fixtures as required. Ensure quality and accuracy of work through careful measurement and inspection.
• Operate and Maintain Equipment: Operate heavy equipment such as presses, cutting tables, CNC routers, and overhead cranes. Maintain clean work surfaces and equipment in compliance with safety and cleanliness standards.
• Manage Documentation: Record work performed in travelers, logs, or digital systems for traceability. Use computer programs such as Microsoft Word, Powerpoint, and Excel to generate procedures, and work instructions, and reports. Contribute to the creation, modification, and maintenance of all documents, procedures, contracts, risk management plans, and any other documentation required by a customer, or stakeholder
• Technical Skill Development: Build technical skills through on-the-job learning, cross-training, and collaboration with senior technicians. Apply feedback and coaching to expand knowledge of composite processes and troubleshooting techniques.
• Communicate Effectively: Communicate effectively with engineering and quality assurance teams to resolve technical issues and ensure project success.
• Continuous Improvement: Contribute to efforts to enhance production processes to increase efficiency and quality. Work with cross-functional teams to resolve quality and technical issues
• Ensure Compliance and Safety: Uphold industry standards, regulations, and safety guidelines in all activities.
• Other duties as assigned

Job Qualifications: The Composites Technician shall have:

• Education: High school diploma or equivalent
• Experience: 2+ years of hands-on experience in composite fabrication, particularly with carbon fiber
• Technical Skills: Familiarity with composite lay-up techniques, trimming, bonding, and basic tooling. Ability to read and interpret technical drawings and work instructions. Basic math and measurement skills.
• Operational Expertise: Some experience with ERP/MRP systems in a production environment
• Problem-Solving : Good analytical and problem-solving skills with a demonstrated passion for operational excellence, innovation, and finding solutions as problems arise
• Communication: Strong written and verbal communication skills
• Interpersonal Skills: Good interpersonal skills with the ability to communicate effectively and maintain credibility in customer, supplier, and co-worker interactions
• Initiative: Proactive approach to identifying and resolving issues to drive projects to successful completion in a team environment
• Adaptability: Ability to quickly understand and apply new concepts in evolving environments while adjusting work approaches to address complex problems
• Attention to Detail: Demonstrated ability to be meticulous and thorough in completing work tasks, ensuring high-quality results and adherence to specifications and standards
• Time Management: Efficiently manages time to meet production schedules and adapt to changing priorities.
• Work Independence: Able to perform assigned tasks independently with moderate supervision in a fast-paced production environment while maintaining focus on safety, quality, and accuracy.
• Software Proficiency: Proficient with Microsoft Office Suite and Basic computer skills
• Physical Demands: Ability to perform physical activities such as standing, walking, lifting, pushing, or carrying heavy objects, sitting for long periods, and performing computer and desk work. Work in environments with varying temperatures and exposure to chemicals and dust (with PPE provided).

Preferred Qualifications:

• Composites fabrication experience - especially with prepreg bladder molding and RTM/VARTM
• Experience in aerospace, automotive, or marine composite manufacturing.
• Knowledge of autoclave or oven curing processes.
• Familiarity with health and safety standards in composites manufacturing.
• Strong proficiency with Microsoft Office tools.
• Aerospace and defense industry experience.

Come Join Our Team:

Compensation & Benefits:
We're proud to offer a competitive total rewards package that includes medical, dental, and vision coverage, 401(k) retirement plan, Employee Stock Ownership Program (ESOP), long-term and short-term disability, and life insurance. Pay is based on experience. This position is located in Bingen, WA, and does not include relocation assistance.

Job Title: Composites Technician
Shift: Full-time, 1st Shift Only
Type: 90-Day Contract-to-Hire
Pay: Based on experience

Job Summary:
We’re seeking a Composites Technician to join a fast-paced manufacturing team focused on custom automotive components. This is a 1st shift, 90-day contract-to-hire role offering long-term opportunity for the right candidate.

Key Responsibilities:

• p >Lay up and trim composite parts using hand and power tools

• Work with molds, resins, and curing processes

• Inspect and finish parts to meet quality standards

• Follow detailed work instructions and safety guidelines

• Maintain cleanliness and organization in the work area
• Collaborate with team members to meet production targets

Qualifications:

• Experience with composite materials or fiberglass preferred

• Ability to read work instructions and use measurement tools

• Good hand-eye coordination and attention to detail

• Capable of standing for long periods and doing repetitive work

• Comfortable using hand tools and sanding equipment

Linked, LLC is an equal opportunity employer committed to creating a diverse and inclusive workplace. We celebrate and embrace differences and are dedicated to providing equal employment opportunities to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Our goal is to ensure that every employee and applicant is treated with respect and fairness. We welcome and encourage applications from all qualified candidates and are committed to making reasonable accommodations to support diverse needs throughout the hiring process. Linked, LLC is proud to be an equal opportunity employer and is dedicated to fostering a work environment where everyone can thrive.

At Layup Parts our mission is to continually impress our customers. We are a startup utilizing the latest technology to reshape the composites industry by manufacturing high quality composite parts faster and more affordably than anyone else. Our customers are developing tomorrow's high tech products, and we are building technology to accelerate their success.

We value initiative and attitude and are building a team of outstanding individuals who take pride in their work, enjoy mentoring and learning from others, and are eager to tackle any challenge.

You will work on:

• Sand/Polish, seal and release molds, as well as waxing and maintenance.
• Laminate parts, including ply placement from dimensions, templates and/or projection systems, placing release film, peal ply, breather, thermocouples etc.
• Making and installing bags, finding and sealing leaks and performing vacuum leak down testing.
• Demold, trim and bond assemblies including bond line preparation.
• Provide DFM feedback to engineers to improve our processes.
• Use internal systems to document production activities such as: material usage, material freeze/thaw status, assigned cure cycles, etc.

Required:

• Be awesome! Be the kind of person you want to work with!
• Be a strong team member, able to give and accept help to deliver quality parts on time.
• Identify and solve problems quickly, and communicate issues clearly to leadership and engineering to prevent recurring issues.
• Have a high sense of urgency, with a strong attention to detail and a resolve to deliver the highest quality.
• Have 3+ years experience as a technician in prepreg composites manufacturing, and have an understanding of industry best practices for things like intensifiers/caul plates, adhesive films, core splicing, hard points, ply drops, debulking, etc.
• Be comfortable to read and interpret layup books, as well as working from process controlling work instructions.
• Be proficient in using common measuring and assembly tools such as calipers, scales, tape measures, torque wrenches, hand drills, etc.
• Be comfortable learning new methods and technologies, and incorporating them into your workflow.
• Be able to lift 50# unassisted.

Preferred:

• Have experience in aerospace and/or motorsport.
• Have experience with both in and out of autoclave manufacturing.
• Have experience in multiple aspects of the manufacturing process such as: operating ply cutter, mold finishing and releasing, mold maintenance, lamination, bagging, curing, de-molding, trimming and/or finishing.
• Have experience in other composites manufacturing methods like vacuum infusion (VARTM), compression molding/hot pressed molding, trapped rubber molding, and wet-layup.
• Have the flexibility to work extended hours/weekends when required to meet customer timelines.

$22 - $38 an hour

Actual base salary will be based on several factors including but not limited to candidates relevant education, experience, knowledge and skill in the core subject matter of the position as well as relevant peripheral qualifications.

Layup Parts also offers equity option grants with most full time offers, as well as a highly competitive benefits including: medical, dental, vision, short and long-term disability and life insurance. We have a competitive PTO plan including paid holiday and vacation time, as well as leave policy.

Layup is an equal-opportunity employer. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance.

ITAR Requirements - To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Composites Technician
Job Category: Service Contract Act
Time Type: Full time
Minimum Clearance Required to Start: Secret
Employee Type: Regular
Percentage of Travel Required: Up to 10%
Type of Travel: Local
* * *
**The Opportunity:**
CACI is seeking a skilled Composites Technician to join our team in support of prototype development and low-rate production of unmanned aerial systems. The ideal candidate will have hands-on experience with composite layup, tooling preparation, part trimming and finishing, and minor structural repairs. This role requires attention to detail, the ability to interpret engineering drawings and build instructions, and a strong background in composite fabrication processes used in aerospace applications.
**Responsibilities:**
- Perform layup and fabrication of composite parts using wet layup, vacuum bagging, and other composite techniques
- Prepare molds and tooling for use in fabrication, including cleaning, sealing, and applying release agents
- Trim, fit, and finish composite components using hand tools and power tools by engineering
requirements
- Interpret and follow build instructions, engineering drawings, and technical documentation
- Identify and report fabrication defects or deviations from design specifications
- Maintain a clean and organized work area and adhere to safety and quality standards
- Work collaboratively with engineers and other technicians to support rapid prototyping and production builds
**Qualifications:**
_Required:_
+ Active Secret clearance or the ability to obtain one
+ Experience in composite part fabrication, including layup, vacuum bagging, curing, and trimming
+ Ability to read and interpret engineering drawings, build instructions, and technical specifications
+ Familiarity with the use of composite materials such as fiberglass, carbon fiber, epoxy resins, and core materials
+ Proficiency with hand and power tools used for trimming, sanding, and finishing composite parts
+ Attention to detail and ability to maintain quality standards in a fast-paced production environment
+ Ability to lift and manipulate medium to large parts and work in a shop environment
_Desired:_
- Experience supporting prototype or low-rate production builds in an aerospace or defense environment
- Knowledge of composite repair techniques and rework procedures
- Familiarity with pre-preg layup and oven/autoclave curing processes
- Experience documenting fabrication processes or contributing to build documentation
-
**___**
**What You Can Expect:**
**A culture of integrity.**
At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation.
**An environment of trust.**
CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.
**A focus on continuous growth.**
Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy.
**Your potential is limitless.** So is ours.
Learn more about CACI here. ( Range:**
This posting is for a position covered by the Service Contract Labor Standards (SCA). The pay and benefits provided for this position will meet or exceed the minimum required amounts detailed in the wage determination issued by the Department of Labor and made applicable to this position, as incorporated into CACI's government contract for the work location.
**Minimum Req** **uired Hourly Wage:**
$30.93
There are a host of other factors that can influence final salary including, but not limited to, geographical location, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here ( .
_CACI is_ _an Equal Opportunity Employer._ _All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any_ _other protected characteristic._

Composites Technician
Job Category: Service Contract Act
Time Type: Full time
Minimum Clearance Required to Start: Secret
Employee Type: Regular
Percentage of Travel Required: Up to 10%
Type of Travel: Local
* * *
**The Opportunity:**
CACI is seeking a skilled Composites Technician to join our team in support of prototype development and low-rate production of unmanned aerial systems. The ideal candidate will have hands-on experience with composite layup, tooling preparation, part trimming and finishing, and minor structural repairs. This role requires attention to detail, the ability to interpret engineering drawings and build instructions, and a strong background in composite fabrication processes used in aerospace applications.
**Responsibilities:**
- Perform layup and fabrication of composite parts using wet layup, vacuum bagging, and other composite techniques
- Prepare molds and tooling for use in fabrication, including cleaning, sealing, and applying release agents
- Trim, fit, and finish composite components using hand tools and power tools by engineering
requirements
- Interpret and follow build instructions, engineering drawings, and technical documentation
- Identify and report fabrication defects or deviations from design specifications
- Maintain a clean and organized work area and adhere to safety and quality standards
- Work collaboratively with engineers and other technicians to support rapid prototyping and production builds
**Qualifications:**
_Required:_
+ Active Secret clearance or the ability to obtain one
+ Experience in composite part fabrication, including layup, vacuum bagging, curing, and trimming
+ Ability to read and interpret engineering drawings, build instructions, and technical specifications
+ Familiarity with the use of composite materials such as fiberglass, carbon fiber, epoxy resins, and core materials
+ Proficiency with hand and power tools used for trimming, sanding, and finishing composite parts
+ Attention to detail and ability to maintain quality standards in a fast-paced production environment
+ Ability to lift and manipulate medium to large parts and work in a shop environment
_Desired:_
- Experience supporting prototype or low-rate production builds in an aerospace or defense environment
- Knowledge of composite repair techniques and rework procedures
- Familiarity with pre-preg layup and oven/autoclave curing processes
- Experience documenting fabrication processes or contributing to build documentation
This position is contingent on funding and may not be filled immediately. However, this position is representative of positions within CACI that are consistently available. Individuals who apply may also be considered for other positions at CACI.
**___**
**What You Can Expect:**
**A culture of integrity.**
At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation.
**An environment of trust.**
CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.
**A focus on continuous growth.**
Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy.
**Your potential is limitless.** So is ours.
Learn more about CACI here. ( Range:**
This posting is for a position covered by the Service Contract Labor Standards (SCA). The pay and benefits provided for this position will meet or exceed the minimum required amounts detailed in the wage determination issued by the Department of Labor and made applicable to this position, as incorporated into CACI's government contract for the work location.
**Minimum Req** **uired Hourly Wage:**
$30.93
There are a host of other factors that can influence final salary including, but not limited to, geographical location, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here ( .
_CACI is_ _an Equal Opportunity Employer._ _All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any_ _other protected characteristic._

SUMMARY:

The Composites Technician III is responsible for the hand layup and filament winding of advanced composite materials on designated tooling per specific work instructions, and/or customer specifications. Tasks included in this position are tooling fabrication, tool prep for lay-up, hand lay-up of pre-preg composite material using a variety of techniques and processes, vacuum bagging, precision trimming and layup techniques.

ABOUT US:

Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible.

COMPENSATION & BENEFITS

• Medical, Dental, Vision
• Company Paid Life Insurance
• 401(k) Retirement Savings Plan
• Paid Time Off (PTO)
• Paid Holidays
• Tuition Reimbursement*

WHAT YOU WILL DO

• Builds composite parts using appropriate hand layup techniques
• Visually inspects for FOD prior to bagging parts for room temperature, oven, and autoclave
• Performs in-process inspections as instructed on work orders and as delegated by quality
• Reads precision measuring tools and instruments
• Uses chemicals, adhesives, and solvents as required
• Operation of ply cutting and curing equipment
• Observes safety and security procedures, reports potentially unsafe conditions
• Reads and understands blueprints and drawings
• Assists with basic facility maintenance and clean-up
• Demonstrates leadership and provides guidance to more junior Composites Technicians

WHAT WE ARE LOOKING FOR

• Required Education: High School diploma
• Required Experience: Experience with basic hand and power tools
• Typically possesses: 4-7 years' experience in aerospace and defense advanced composites manufacturing environment
• Possesses computer proficiency and familiarity with common office applications
• Demonstrates passion for the aerospace and defense industry, and strong desire to work in a fast-paced, hands-on environment
• Demonstrates mechanical aptitude and a strong work ethic
• Physical requirements of this position include moderate physical and repetitious work, standing for extended periods of time, the use of stairs and occasional heavy lifting
• Must be a U.S. Citizen

EQUAL EMPLOYMENT OPPORTUNITY

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.

Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis ("protected class") including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Saronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms.

Position Summary:

As a Trim & Drill - Composites Technician, you'llbe responsible for trimming, drilling, shaping, and post-processing composite components such as hulls and decks-and small structural parts-ensuring they meet tight tolerances and exacting quality standards for DoD use. This is a hands-on, detail-driven role that requires craftsmanship and consistency.

Key Responsibilities:

• Trim, cut, and grind composite parts using hand tools, pneumatic tools, and shop equipment
• Interpret trim outlines, edge tolerances, and technical drawings to guide finishing operations
• Deburr edges, prepare bonding surfaces, and ensure accurate fitment to mating components
• Use jigs, templates, and measurement tools (calipers, tape, gauges) to verify part geometry
• Perform surface prep for painting, bonding, or secondary assembly
• Maintain cleanliness, safety, and organization of grinding and trim areas
• Identify defects, report nonconformances, and assist in rework or repair processes
• Collaborate with layup, infusion, and quality teams to ensure seamless production flow
• Accurately document work and support process improvements
• Use a tablet

Requirements:

• 1-3 years of hands-on experience trimming large and small composite or fiberglass parts
• Work with a sense of urgency
• Skilled with grinders, sanders, Dremels, saws, pneumatic drills, pneumatic saws, etc
• Ability to interpret engineering drawings and work instructions
• Familiarity with composite materials including carbon fiber, fiberglass, and core structures
• Strong attention to detail and a safety-first mindset
• Physical ability to lift parts, stand for long periods, and work in protective equipment
• U.S. Person status (citizen or permanent resident) required for DoD-related work

Preferred Qualifications:

• Experience with aerospace, marine, or defense composite components
• Knowledge of bonded assembly and surface prep techniques
• Exposure to AS9100 or ISO 9001 production environments
• Experience with jigs and fixtures for composite assembly
• Forklift or material handling experience is a plus

Benefits

• Medical Insurance: Comprehensive health insurance plans covering a range of services
• Saronic pays 100% of the premium for employees and 80% for dependents
• Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care
• Saronic pays 99% of the premium for employees and 80% for dependents
• Time Off: Generous PTO and Holidays
• Parental Leave: Paid maternity and paternity leave to support new parents
• Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses
• Retirement Plan: 401(k) plan
• Stock Options: Equity options to give employees a stake in the company's success
• Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage
• Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office

Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Description

Job Summary

The primary role of an Experimental Composite Technician III is to efficiently and accurately, fabricate and assemble composite parts needed to support Product Development programs. Many of these parts are new designs that may require revisions and adjustments to determine the best way to fabricate. For this reason, experimental technicians must have excellent communication skills to efficiently communicate with design engineers and other team members. Parts are primarily fabricated from either prepreg or hand layup process using either carbon fiber or fiberglass materials. The execution of these parts and assemblies may come from mental concepts, verbal instructions, hand sketch drawings, or blueprints. The candidate must be well versed in common tools used in the finishing of composite parts and prepping new molds.  A wide range of skills and a willingness to learn new ones is essential to being effective in a very diverse and dynamic environment. In addition to responsibility outline in Experimental Composite technician II, the ideal candidate would show a strong understanding of the following responsibilities.  

This position comes with a $5,000.00 signing bonus! You will receive half on your first paycheck and half after 6 months of employment.

Duties and Responsibilities/Essential Functions

• Works with and understands different resin systems, including industry processes outside of Cirrus. 

• Performs mods and repairs to concept, print, and SRM.  

• Complete complex hardware stack ups according to drawings and process specs.  

• The ability to lay up, bag and cure complex parts with little rework. 

• Complete complex repairs layups and modifications. 

• Complex core preparation for layups involving thermoformed applications. 

• Perform repairs or modifications with little to no rework at high efficiency.  

• 3D tooling bonding and build up. 

• Communicates with engineering to generate processes of repair or rework.  

• Trains new employees in standard processed. 

• Encourages and helps others to use appropriate PPE, follows proper safety protocol, and minimizes potential safety hazards.  

• Teach new team members laser set up. 

• Set up and operate the ply cutting table.

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

• GED or HS degree required minimum 5 years of direct industry experience. 

• Strong creative mind that excels at solving problems along with successfully collaborating with a diverse team during the development of new technologies and designs. 

• Ability to teach the setup of laser aids. 

• Able to complete complex assemblies and installations of next higher assemblies.  

• High understanding of composite process specs and their application.  

• Able to identify damage, the extent of the damage and able to remove damage before repair is started. 

• Proficient in bagging and curing complex layups.  

• Ability to cut and modify ply files.  

• Ability to bond and build 3D printed tooling. 

• Ability to create nonstandard parts using nonstandard processes.  

• A general understanding of small airplane architecture including airframes. 

Competencies

To perform the job successfully, an individual should demonstrate the following competencies:

• Balances Stakeholders

• Communicates Effectively

• Detail Oriented

• Innovative

Our Benefits: Cirrus provides a range of exciting benefits, including:

• 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting.

• Employer-Paid Coverages: Group term life, short- and long-term disability insurance.

• Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options.

• Free Health Tracking: With rewards for meeting health goals.

• Generous PTO: Over 100 hours accrued within the first year.

• Employee Referral Bonus: For referring talented candidates.

• Career Development: Tuition reimbursement and professional growth opportunities.

• Exclusive Discounts: Access to partner and marketplace discounts.

• Community & Engagement: Company and employee clubs at various locations.

These benefits are designed to support your well-being, growth, and enjoyment at Cirrus!

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required.

Cirrus is dedicated to a drug free work environment promoting equal employment opportunity.  Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights ( notice from the Department of Labor.