103 Contract Drafting jobs in the United States

• Prepare engineering documentation that is complete, accurate, and compatible with established standards. Incorporate manufacturing and applicable design principles into design with basic guidance from engineers.
• Create complete work packages, while only being provided basic concepts and desired results of equipment. Assist engineers in small projects with limited direction.
• Manage and maintain Western Zirconium's engineering documents in the established document storage working procedure and/or responsibility assigned:
• Provide technical assistance, instructions, and peer checks for lower classified drafters. Coordinate work on large projects; provide work load supervision in the absence of immediate supervisor.

• Prepare drawings provided from engineer sketches.
• Incorporate Red-Line marks as provided from engineers.
• Create accurate "As-Built" drawings by gathering information from existing drawings, and equipment, using standard measuring tools.

• Maintain drafting requests and drawings in document management system (Enovia).
• Incorporate appropriate detailed manufacturing data into design.
• Incorporate applicable design principles to establish missing information to complete drawings, including basic design calculations with the guidance of an engineer.
• Obtain and incorporate customer input (Maintenance, Operators, etc.) into design.
• Complete design of complex equipment with only being provided basic concept and desired results.
• Check drawings to ensure the release of a quality product in accordance with established standards, including:
• Revision level, title block and parameters, drawing number, format standards.
• Notes and bill-of-materials for completeness, clarity and accuracy.
• All dimensions and tolerances for accuracy, completeness, form, fit and function.
• Continuity and uniformity between related drawings.
• Return drawings for correction to originating drafter, explain deficiency and corrective action required and ensure appropriate corrections are made.
• Organize and lead User group meetings with like drafters.
• Encourage use of standards.
• Share knowledge of drafting software.
• Improve consistency of drawings.
• Plan training opportunities.
• Obtain a working knowledge of all job-related software used by plant.

• High school diploma or equivalent.
• Two (2) years in industrial drafting from a vocational or technical school, specializing in mechanical, civil, electrical or instrumentation. Additional discipline specific courses teaching advanced design concepts, or have industrial discipline specific experience that utilized advanced design concepts.
• Six (6) years of on-the-job drafting/design utilizing Microsoft Office and Autodesk software (AutoCAD / Inventor). A working knowledge of engineering practice and application of industry codes/standards in the electrical / chemical / mechanical industries.
• Proficient using 2D & 3D Autodesk software or Solid Works 3D
• Use ISA Standards to develop new P&IDs, Field Verified (as-built) P&IDs and loop diagrams.
• With minimal supervision, design mechanical devices using ANSI, ASME, OSHA and other associated Standards
• Size hydraulic and air components such as cylinders, motors, valves, pumps, etc to meet design criteria
• Specify moving components such as bearings, gearboxes, motors etc for load, horsepower, tolerance, duty rating, service factor, with appropriate installation
• Verify drawings to ensure performance, accuracy, and compatibility with established standards
• Estimate and schedule drafting work

• Lead, mentor, and develop the Drafting Department to achieve team and company goals.
• Manage drafting schedules and ensure timely, accurate deliverables for steel manufacturing projects.
• Review engineered designs and specifications for constructability and manufacturability.
• Check and approve drawing packages prior to release for fabrication.
• Develop, maintain, and continuously improve drafting standards, workflows, and best practices.
• Collaborate closely with Engineering, Project Management, and Manufacturing to align deliverables with project requirements.
• Drive the adoption of new digital drafting tools, CAD software, and model-based practices.

• Associate or Bachelor's degree in Drafting, Engineering Technology, or a related field (or equivalent experience).
• Minimum of 7 years of progressive drafting and design experience with utility tapered tubular steel poles for transmission lines and substations, including 3 years in a drafting management role.
• Proficiency in CAD software; familiarity with Autodesk Inventor is a plus.
• Solid understanding of AWS weld symbols and structural component detailing.
• Excellent communication, organizational, and leadership skills.
• Ability to manage multiple priorities in a fast-paced environment.

GENERAL DESCRIPTION

The Drafting Manager is responsible for the overall management of the Drafting staff at their location and on a project basis through execution of their work in a quality, timely, and efficient manner. The Drafting Manager reports to the Vice President of Construction Services.

WHY WORK FOR US?

At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results.

In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better.

WHAT WE HAVE TO OFFER

Wells values our employees and is committed to providing a competitive and comprehensive benefits package.

• Health, dental and vision insurance
• Paid premiums for short- and long-term disability, and life insurance
• Wellness Incentives
• Paid holidays
• Flex spending for medical and daycare
• Health savings account (HSA)
• 401(k) plan with profit sharing
• Access to Nice Healthcare
• Employee Assistance Program
• Paid Time Off (PTO)
• Wishbone Pet Insurance
• Critical Illness Benefit Plan
• Accident Insurance Plan
• Voluntary Hospital Indemnity Plan

Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative.

Other benefits include Health and Family Care leave for both union and non-union employees.

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES

• Leading a team of drafters to, on a project basis, interface with customers, sales, operations, engineering, and project management to create construction documents using CAD/Revit software. Drawing details include all views and dimensions necessary for clear and accurate presentation, fabrication and erection of precast panels and architectural systems and structures
• Recruiting, staffing and developing drafting team members
• Assessing individual performance, providing performance feedback and determining appropriate compensation/rewards
• Planning and assigning work to the drafting team to meet project schedule and cost deadlines
• Coordinating with companywide Drafting Managers to enforce quality assurance, effective resource allocation, and continuous improvement
• Work with Technology Integration team to ensure training and performance coincide with efficient, effective drafting practice
• Aiding in establishment and maintenance of standards and procedures for generating models, drawings, and associated documents
• Coordinating drafting needs with sales, engineering and project managers to effectively deploy drafting resources. Work with all departments on continuous improvement initiatives to ensure high customer satisfaction and achieving desired quality, timeliness and cost objectives
• Overseeing drafting hours while ensuring productivity and promoting a healthy and positive work environment
• Complete special projects and perform other duties as assigned

EDUCATION, SKILLS, AND ABILITIES REQUIRED

• Bachelor's degree in Engineering or Drafting degree with 5+ of drafting experience
• 3+ years of precast experience or related construction experience
• Must have interpersonal communication skills to interact with co-workers, customers, contractors, and design teams
• Ability to train and coach other employees
• Must be able to solve problems quickly and efficiently
• Proficient with Microsoft Office as well as D&E software
• Must be able to lead a team with respect and dignity
• Must be motivated and self-driven to complete a task
• Ability to travel with some overnights
• Possession of a valid driver's license, and the ability to operate a motor vehicle

PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS

• Ability to sit or stand for extended periods of time
• Manual dexterity and hand-eye coordination for typing, filing, and using office equipment
• Visual acuity and ability to read small print
• Hearing acuity and ability to communicate effectively with others
• Ability to lift and move office supplies and equipment
• Mobility and ability to move around the office as needed

WORKING CONDITIONS

• Minimal risk of exposure to unusual elements
• Minimal risk of safety precautions
• General office environment

This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be assigned by his/her supervisor.

Wells in an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S.

#LI-MJ1

Full-Time Drafting Technician - Civil/Environmental Engineering

Company Description

Envicon Engineering is a leading civil and environmental engineering consulting firm in the tri-state area. Since 2005, we have specialized in providing cost-effective, practical solutions for site development and remediation projects. Our mission is to help transform underutilized and contaminated properties into functional, thriving spaces.

Role Description

We are seeking an Engineering Drafter to support our growing team on environmental and civil engineering projects in the New York City and Northern New Jersey region. This hybrid role allows for both on-site and remote work.

The ideal candidate will assist with preparing engineering drawings and documentation related to site development, environmental compliance, and construction oversight. Candidates with experience in AutoCAD Civil 3D and a background in drafting for civil or environmental projects will be given preference.

Responsibilities

• Prepare draft engineering drawings, maps, and site plans using AutoCAD Civil 3D .
• Assist in site design, permitting, and compliance documentation for civil and environmental projects.
• Support project managers with technical documentation such as site plans, construction progress reports, and regulatory submittals.
• Organize and maintain project files, revisions, and as-built drawings .
• Coordinate with engineers and team members to ensure drawings meet project specifications and regulatory requirements.
• Occasionally assist with field visits to collect data or verify site conditions.

Qualifications

• Associate degree or technical certification in drafting, CAD design, civil engineering, environmental engineering, civil engineering technology, or a related field (or equivalent work experience).
• Proficiency in AutoCAD Civil 3D and HEC RAS is required.
• Experience with Microstation and/or ArcGIS mapping software is a plus.
• 3+ years of experience in drafting for civil engineering, environmental, or construction projects preferred.
• Ability to interpret and prepare site plans, grading plans, stormwater report calculation support, and construction drawings .
• Strong attention to detail and ability to work independently.
• Effective communication skills for collaborating with Envicon engineers and project managers .

Preferred but Not Required

• Experience with environmental compliance projects (e.g., NYSDEC, NJDEP, NYCDEP).
• Familiarity with stormwater and erosion control plans, site plan development, and preparation of engineering plans from conceptual site plans to record of construction drawing development.

Compensation & Schedule

• Hourly Rate: $30 - $40 per hour (based on experience).
• Schedule: 40 hours per week, with flexible hours.
• Overtime: Available with prior manager approval.
• Hybrid Work: Remote work is possible, but some on-site presence may be required.

Competitive Benefit Package (full-time employees)

• Training & certification reimbursement.
• Paid Time Off (PTO), Flexible Work Schedules, and Company Paid Holidays
• Professional organization membership and networking opportunities.
• 401(k) retirement plans with company matching.
• Company sponsored healthcare plan

Envicon is an equal opportunity employer. We encourage applications from all backgrounds and are committed to diversity in our workforce.

Apply Today & Join Our Growing Team!

Visit our website: Join Our Team - Envicon Strategic Solutions

Job Type

Full-time

Description

Company Overview: Whirlwind Steel is a premier metal building manufacturer specializing in the design, fabrication, and delivery of top-quality metal structures. Our unwavering commitment to excellence, innovation, and customer satisfaction has positioned us as an industry leader. This has allowed us to become creators and distributors of buildings and products that people use to live, learn, worship, work, and play.

The Opportunity: We are seeking a skilled and experienced Manufacturing Draftsman to join our PMFG division. The Draftsman will be responsible for ensuring all project drawings and specifications are accurate and meet our quality standards. This role involves close collaboration with various team members to ensure that all details are correct and ready for the quoting and manufacturing processes.

Key Responsibilities:

• Review customer technical drawings and schematics using company software.
• Verify the accuracy of all weights and ensure prices are included on all relevant details.
• Include copies of details for any parts not readily available in the manufacturing shop, ensuring they are organized with shop details.
• Perform thorough reviews and evaluations of completed drawings to verify accuracy, completeness, and compliance with project specifications.
• Update and revise drawings as needed to reflect changes in materials or production methods throughout the project lifecycle.
• Collaborate closely with cross-functional teams to ensure alignment on requirements and project objectives.

• High School Diploma or equivalent.
• Proven experience as a draftsman or similar role.
• Proficiency in computer-aided design (CAD) software, such as AutoCAD.
• Solid understanding of metal building manufacturing processes, materials, and fabrication techniques.
• Strong organizational and time management skills.
• Strong attention to detail and accuracy.
• Excellent communication and collaboration skills, with the ability to work effectively in a team environment.
• Knowledge of metal building standards and regulations related to drafting and manufacturing.
• Effective communication skills, both verbal and written.

• Coordinate all design and drafting functions for assigned projects
• Track assigned jobs and coordinate schedules with Drafting Manager, Plant Scheduler, and Project Manager
• Act as the primary liaison between the customer and internal Metromont departments to resolve issues concerning drawings, repair details, material requisitions, etc.
• Assist in the analysis of problem areas and recommended solutions
• Act in the capacity of prime checker of assigned projects and be responsible for the accuracy of erection drawings and shop tickets
• Alerts Engineering Project Manager or Senior Project Manager to job/drawing scope changes
• Monitors the approval status of drawings and keep Drafting Manager, Senior Project Manager, Engineering Project Manager and Production Scheduler informed of status
• Must adhere to Metromont and OSHA safety rules and regulations

• Medical, Rx, Dental, Vision Insurance, Telehealth, and Health Savings Account available on your first day of employment
• Wellness Program to support employee health
• 401K with company match
• Paid Vacation
• 7 paid holidays
• Safety Shoe voucher - $150
• Continuing Education Program

• Deadline and detail oriented
• Clear and concise communication skills
• Able to focus on work tasks for an extended amount of time
• Able to operate within defined standards and processes
• Must understand Multimedia Personal Computer (MPC) standards and policies and work with limited supervision
• Able to adapt to changed in work schedules, tasks, or processes
• Values and demonstrates safe working behaviors

• Associates degree in Design, Architecture, or related field with coursework in computer-aided design (CAD) is required
• Minimum 2 years previous drafting experience