301 Corrosion Control jobs in the United States

RATE OF PAY: $30.90 per hour
Work will include the following: Knowledge of surface peculiarities and types of paint and rust treatment chemicals required for different types of metals. As directed grinds, sands, cleans, preserves, and prepares metal surfaces for painting. Job will include rust removal, rust treatment, paint, preparing surfaces on all types of equipment, cranes, vehicles and machinery using various hand tools such as but not limited to needle gun or scaler, chippers, sanders, grinders, putt knives, and drills. Job will also include applying surfaces, with brush, roller, spray gun, and other equipment to obtain desirable results of color, coating, film, thickness, coverage and protection. Must be able to position and operate equipment including needle gun, compressors, receivers, water separators, filters, and hoses. May mix colors, oils, and thinners to obtain proper color or consistency. In general, the work of the corrosion control technician requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training experience. Performs other duties as assigned.
+ High school education or equivalent.
+ Must demonstrate proficiency in the use of spray painting and rust removal equipment, to include all tools common to corrosion control.
+ Must have thorough knowledge of paints, thinner, and lacquers and have good color perception.
+ Must be able to read and comprehend mix ratios and minimum surface preparation as required by paint manufacturers.
+ Must be able to work with protective coatings to include but not limited to thinners, lacquers, epoxies, cleaners, inorganic zinc coatings, polyamide epoxy coatings, aliphatic polyurethanes, and epoxy mastic coatings.
+ Must be able to work at various heights, including work from mechanical lifting devices.
+ Must possess a valid state driver's license.
+ Must have and wear hard-toed safety shoes which meet ASTM F standards
+ Must agree to be able to wear a close-fitting respirator (requires the absence of facial hair that would interfere with the respirator seal).
+ Successful candidate will be subject to a government security investigation and must continually meet eligibility requirements for access to all areas of Mayport Naval Station.
Physical Requirements (Activities performed during a typical day)
+ Walking: Frequent
+ Standing: Frequent and prolonged
+ Climbing: Moderate
+ Stooping/Bending: Frequent
+ Reaching: Frequent
+ Crawling: Moderate
+ Lifting: Up to 30 lbs.
+ Personal protective equipment will be required.

**Job Description**
As applicable, **Aircraft Corrosion Control Supervisor** advises the Superintendent on technical matters and leads a mission focused maintenance effort. Manages assigned resources necessary to accomplish the mission. Controls maintenance through leads and seniors. Responsibilities differ only in degree and are common and applicable to all maintenance functions.
**Essential Responsibilities:**
+ Enforces strict adherence to technical data and management procedures.
+ Adjusts resources to meet production requirements.
+ Assigns adequate supervisory coverage for each shift.
+ Manages the special certification roster (SCR).
+ Ensures accurate daily documentation of maintenance actions.
+ Reviews and evaluates management and production effectiveness. Analyzes personnel and equipment performance history using QA reports. Initiates management actions to meet new workloads or correct reported/perceived deficiencies.
+ Participates in the maintenance planning cycle.
+ Ensures only qualified personnel accomplish maintenance with the appropriate equipment and tools.
+ Ensures compliance with safety directives, appropriate occupational safety and health standards, and applicable industrial safety publications. Those occupational training requirements that require documentation will be annotated on the appropriate records.
+ Establishes procedures to minimize foreign object damage and dropped objects.
+ Ensures PRDs, scheduled, and unscheduled maintenance actions are entered and completed in the MIS. This includes maintenance performed in support of maintenance squadron flights.
+ Advises the production supervisor of conditions that may disrupt the orderly and controlled execution of the maintenance plan.
Perform all other position related duties as assigned or requested.
**Minimum Qualifications Required:**
+ High School Diploma or equivalent.
+ Must possess 5-8 years aircraft maintenance experience in the private sector or military directly related to contract performance or equivalent.
+ Excellent communication, interpersonal, organizational, and analytical skills are required.
+ Position may require travel.
+ Must be able to obtain/maintain any company/government required qualification, certification, licensing, or security clearance.
+ Must be able to work any assigned shift or schedule assigned.
+ Must have valid driver's license.
+ Must be able to obtain/maintain a Tier 1 Public Trust Clearance. NOTE: US Citizenship is required to to obtain/maintain a Tier 1 Public Trust Clearance.
**Preferred Qualifications:**
+ Bachelor's degree in business, Engineering or Management is preferred.
**Work Environment, Physical Demands, and Mental Demands:**
Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/organizing skills, and must be able to work under deadlines.
**Other Responsibilities:**
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

**Job Description**
As applicable, **Aircraft Corrosion Control Supervisor** advises the Superintendent on technical matters and leads a mission focused maintenance effort. Manages assigned resources necessary to accomplish the mission. Controls maintenance through leads and seniors. Responsibilities differ only in degree and are common and applicable to all maintenance functions.
**Essential Responsibilities:**
+ Enforces strict adherence to technical data and management procedures.
+ Adjusts resources to meet production requirements.
+ Assigns adequate supervisory coverage for each shift.
+ Manages the special certification roster (SCR).
+ Ensures accurate daily documentation of maintenance actions.
+ Reviews and evaluates management and production effectiveness. Analyzes personnel and equipment performance history using QA reports. Initiates management actions to meet new workloads or correct reported/perceived deficiencies.
+ Participates in the maintenance planning cycle.
+ Ensures only qualified personnel accomplish maintenance with the appropriate equipment and tools.
+ Ensures compliance with safety directives, appropriate occupational safety and health standards, and applicable industrial safety publications. Those occupational training requirements that require documentation will be annotated on the appropriate records.
+ Establishes procedures to minimize foreign object damage and dropped objects.
+ Ensures PRDs, scheduled, and unscheduled maintenance actions are entered and completed in the MIS. This includes maintenance performed in support of maintenance squadron flights.
+ Advises the production supervisor of conditions that may disrupt the orderly and controlled execution of the maintenance plan.
Perform all other position related duties as assigned or requested.
**Minimum Qualifications Required:**
+ High School Diploma or equivalent.
+ Must possess 5-8 years aircraft maintenance experience in the private sector or military directly related to contract performance or equivalent.
+ Excellent communication, interpersonal, organizational, and analytical skills are required.
+ Position may require travel.
+ Must be able to obtain/maintain any company/government required qualification, certification, licensing, or security clearance.
+ Must be able to work any assigned shift or schedule assigned.
+ Must have valid driver's license.
+ Must be able to obtain/maintain a Tier 1 Public Trust Clearance. NOTE: US Citizenship is required to to obtain/maintain a Tier 1 Public Trust Clearance.
**Preferred Qualifications:**
+ Bachelor's degree in business, Engineering or Management is preferred.
**Work Environment, Physical Demands, and Mental Demands:**
Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/organizing skills, and must be able to work under deadlines.
**Other Responsibilities:**
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

The purpose of this position is to inspect and maintain cathodic protection systems and equipment used for corrosion control to ensure compliance with applicable regulations, policies, and procedures. Corrosion control utilizes chemistry, electricity, physics, metallurgy, and other sciences to mitigate or control corrosion damage through the application of cathodic protection to control the mechanical, electrical, and chemical aspects involved in the deterioration of a material (corrosion).
The duties listed are activities associated with the various levels of the Corrosion Department progression. This progression covers the following general titles:
+ Corrosion Apprentice
+ Corrosion Technician I
+ Corrosion Technician II
+ Corrosion Technician III
**JOB DUTIES & RESPONSIBILITIES**
The Corrosion Technician I Position is assigned, but not limited to an operational area where they are responsible for the following:
+ Compliance surveys and all associated inspections (e.g., annual test points, isolated services, casings, bonds, foreign crossings) in compliance with applicable codes, standards, and procedures.
+ Basic and timely cathodic protection troubleshooting.
+ Timely creation of remediation work orders (e.g., install anodes, clear short, install insulator, repair / replace test station). Follows through with necessary departments to ensure timely completion.
+ Alternating Current (AC) Monitoring and Mitigation
+ Maintenance and updates of corrosion control mapping systems (GIS) in a timely fashion.
+ Troubleshooting and maintenance of rectifiers
+ Maintaining half-cells in accordance with procedures
+ Atmospheric inspection of exposed pipe spans in accordance with applicable codes, standards, and procedures.
+ Monitoring of corrosion control records to ensure compliance in the company designated databases and database systems.
+ Generate reports from company designated database systems as needed.
+ Analysis of survey data.
+ Provides relevant support / inspection for cathodic protection needs on engineering / construction projects.
+ Provides corrosion control-related support to internal departments or external contract support.
+ Accurately enters new facilities and compliance data into the appropriate system of record in a timely fashion.
+ Participates as needed in regulatory audits to ensure compliance.
+ Maintain a safe work environment.
**Qualifications - Corrosion Technician I**
The Corrosion Technician Level I position is the lowest fully skilled position in the Corrosion Job Family. A Corrosion Technician I may enter the role with related or direct corrosion control experience. The Corrosion Technician I should be able to work independently in a safe manner to complete routine surveys, inspections, and remediation or maintenance with minimum to no support. A Corrosion Technician I is required to a demonstrate a knowledge of procedures, company policies, safety systems, federal and state codes, and equipment, exhibit safe work habits, and have the necessary qualifications under the company's OQ policy.
**Education, Certifications/Licenses:**
**Required:**
+ Associate degree - technical / trade school with math, electrical, or science-based curriculum
OR
+ High school diploma with equivalent combination of education and experience
+ The Corrosion Control Management Team will evaluate a candidate's equivalent education and experience to determine if the individual meets the qualifications for the position.
+ Must possess a valid driver's license.
**Progression Requirements:**
+ A Level I technician may be evaluated to progress to a level II technician after serving in the level I technician role for a minimum of two (2) years.
+ A Level I is required to successfully progress to a level 2 technician within six (6) years after becoming a level I technician or vacate the position.
**NOTE: In certain operational areas, this job is part of a bargaining agreement. Any deviation to the progression requirements as part of a bargaining agreement will take precedence over the requirements listed above.**
**Preferred:**
+ NACE CP1 (Cathodic Protection Tester)
+ NACE Corrosion Technician Certification
**Related Work Experience:**
**Required:**
+ 1 year corrosion control experience
OR
+ Successful completion of Company designated Corrosion Apprentice training and Level I evaluation.
**Preferred:**
+ Corrosion Related or Electrical experience.
**Specific Skills & Knowledge:**
**Required:**
+ MS Office Suite - intermediate proficiency
+ Attention to detail.
+ Organizational Skills - Intermediate
+ Ability to read and understand codes, standards, and procedures.
+ Knowledge of basic electrical principles - intermediate proficiency
+ Electrical knowledge (Ohms Law)
+ Mathematics aptitude - intermediate proficiency (Algebra & Geometry)
+ Problem solving skills.
+ Critical Thinking
+ Data Analysis.
**Preferred:**
+ Pipeline Compliance System (PCS) proficiency
+ Field Data Logger Proficiency (Allegro, MESA 3 Tablet, etc.)
+ Geographic Information System (GIS) proficiency
**Working Conditions/Physical Requirements:**
+ Frequent local travel with occasional (5 - 20%) overnight travel.
+ This position frequently requires prolonged standing or walking.
+ This position frequently requires the incumbent to reach above shoulder level.
+ This position frequently requires the incumbent to bend, kneel, crouch, or crawl.
+ This position requires the ability to lift up to 50 pounds
+ The incumbent works in both office and field environments.
+ The incumbent may work near or with moving mechanical parts.
+ The incumbent may be exposed to fumes, airborne particles, or chemicals.
+ The incumbent may be exposed to varying outdoor weather conditions.
+ The incumbent may be exposed to excessive noise.
**Disclaimer:** _This information describes the general nature and level of work performed by employees in this job. The description is not designed to be a comprehensive inventory of duties, responsibilities and qualifications required in the job; responsibilities may be changed or added without advance notice. Reasonable accommodations may be made to qualified disabled individuals for performance of essential duties and responsibilities._
**About Southern Company Gas**
Southern Company Gas is a wholly owned subsidiary of Atlanta-based Southern Company (NYSE:SO), America's premier energy company. Southern Company Gas serves approximately 4.2 million natural gas utility customers through its regulated distribution companies in four states and approximately 600,000 retail customers through its companies that market natural gas. Other nonutility businesses include investments in interstate pipelines and ownership and operation of natural gas storage facilities. For more information, visit southerncompanygas.com .
Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit .
Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here . Additional and specific details about total compensation and benefits will also be provided during the hiring process.
Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law.
Job Identification: 14693
Job Category: Gas Pipeline Operations & Maintenance
Job Schedule: Full time
Company: Nicor Gas
Pay Range: 31.56 - 31.56 USD Hourly: Base salary varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, and at the time of this posting, this is the reasonable salary range for this role.

**Corrosion Control Mech II.** Identify and treat corrosion by chemical and/or mechanical means. Remove and/or paint aircraft.
**Accountability**
+ Perform all work-related actions as directed by management.
+ Follow instructions by work center shift lead, or above.
+ Ensure safety, security and preservation of government and company owned equipment.
+ Address/approach customer in courteous and professional manner.
+ Address/approach co-workers in a courteous and professional manner.
+ Maintain work center in a clean and orderly fashion.
+ Meet government and company license and/or qualification requirement(s).
+ Complete and comply with On the Job Training (OJT), Foreign Object Damage (FOD), Hazardous Waste (HW), Tool Control Program (TCP) and Egress Familiarization, Program and all safety regulations by site, city, state and federal.
+ Qualify, perform and maintain collateral duty inspector (CDI) as required.
+ Qualify, perform and maintain engine turn qualification as required.
+ Lead in performing scheduled/unscheduled corrosion inspection(s) and treatment in accordance with technical manuals.
+ Lead in stripping and painting aircraft, support equipment and parts as required.
+ Lead in Disposing of spent chemicals/hazardous waste in accordance with government and company regulations.
+ Lead in the participation of towing of aircraft.
+ Complete maintenance action form(s) in NALCOMIS/OOMA and other records.
**Education and Experience**
+ High school diploma or GED, required.
+ One (1) year experience in aircraft corrosion control, required.
+ Two (2) years of experience removing and applying aircraft paint and primer (e.g. conventional spray, airless spray, hot spray and/or high volume/low pressure spray) preferred.
+ Read and comply with verbal and written instructions.
**Physical Requirements and Work Environment**
+ Walk, stand on level and/or inclined surfaces for extended periods of time.
+ Lift up to fifty (50) pounds.
+ Climb, bend, stoop, squat, crawl, crouch, kneel, lift, carry, balance and reach above shoulder level.
+ Wear protective clothing or other safety equipment, required.
+ Handle required/approved hazardous material(s) as per material data safety (MSD).
+ Work environment of a standard shop and hangar to inclement weather and extreme heat.
+ Must be able to work all shifts & schedules.
+ Normal hearing, required.
+ Exposure to noise hazard.
+ Color vision, required.
+ Valid driver's license, required.
**Travel**
- As required for periods up to, or past 90 days.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

**Summary/General Description Of Job:**
Incumbent uses various substances and tools to install, inspect, repair, maintain, adjust and control corrosion on impressed current and sacrificial anode cathodic protection systems at an advanced level.
**Essential Duties & Job Functions:**
- Uses hand tools, precision instruments, and other specialized equipment to install, inspect, repair, maintain, and adjust impressed current and sacrificial anode cathodic protection systems.
- Prepares test instruments, conducts field tests, records and collects data for the preparation of reports.
- Prepares preliminary analysis of data to determine appropriate response actions that may include generation of repair work, or referral of information for advanced analysis by Registered Mechanical Engineer, who provides technical guidance on corrosion control requirements.
- Prepares technical reports using PC-based systems that are pre-formatted for data collection, maintenance, and report generation using fundamental personal computer skills.
- Removes, repairs, restores and applies industrial coatings used to control corrosion and routine cleaning/maintenance of associated equipment.
- Maintains, repairs and/or replaces cathodic protection systems.
- Performs other related duties as assigned.
May perform work in other classifications when incidental work is necessary to the accomplishment of the work assignment. Significant work in another job classification may be required if accompanied by any wage adjustments applicable.
**Accountable For:**
- The proper use of tools and equipment commonly used in the corrosion control field.
- Completing all mandated training requirements per government and management directives.
- Timely and cost-effective performance of duties.
- Timely completion and accuracy of all departmental work.
- Dealing with a variety of people in a professional, courteous manner in diversified situations.
- Adherence to established company safety policies and good industrial and office safety practices.
- Compliance with company Standard Operating Procedures and Personnel policies and procedures.
- Having the ability to work well under pressure.
**Job Requirements (Education, Experience, Professional Associations):**
**Mandatory**
- Five (5) years' experience in the field of corrosion control.
o An Associate's Degree in engineering, physical sciences, or a related field may be substituted for two (2) years of the required experience if the course of study included physics, chemistry, and mathematics.
- Thorough familiarity with repairing electrical and electronic application of all Cathodic Protection equipment and devices.
- Thorough familiarity with electrical and electronic test equipment.
- Ability to determine the selection and application of industrial protective coatings.
- Basic math and communications skills.
- Ability to read and interpret simple blueprints, schematics, and technical specifications.
- Ability to meet and maintain company physical and security requirements, including respirator qualification, and clearance eligibility when required.
- Must possess good communication skills for a service team environment.
- Valid state driver's license with acceptable driving record
- Ability to successfully pass any background checks and/or drug testing required on the contract.
- U.S. Citizenship.
**Preferred**
- Certification and/or training provided by the National Association of Corrosion Engineers (N.A.C.E.) - Certification Exam - CIP Level 3 Oral Exam NACE-CIP3-001. U4 UST Cathodic Protection
- U.S. Citizenship.
Wages -$45.16 per hr
Competitive pay and top-shelf benefits package supporting our national defense. Our facilities team serves a diverse range of high-value national strategic missions.
Benefits package with United Steelworkers which can exceed $10/hour, includes:
- Paid vacation. Two weeks at one year, grows to three weeks after five years and four weeks after ten years.
- Personal Leave 1 hour of paid Personal/Sick leave for every thirty (30) hours worked.
- Pension and 401K
- Medical, vision, dental and life insurance
- 11 Paid Holidays

Title:
Corrosion Control Technician - 2nd Shift
Belong, Connect, Grow, with KBR!
Program Summary
The Marine Corps Prepositioning Program (MCPP) is based in Jacksonville, Florida. We provide maintenance and logistic services to the U.S. Marine Corps (USMC) in support of this program. For over 35 years we have planned, coordinated, and executed the maintenance and logistic services for ground combat vehicles and support equipment for USMC Expeditionary Forces.
Job Summary
Performs duties involved with setting up, operating, and performing preventative maintenance on complete stationary and portable sandblasting equipment and machines used for cleaning metal and nonmetal surfaces. Performs duties involving the application of coating materials (i.e., paint, varnish, lacquer, shellac, etc.), on wood, metal, glass, concrete and other surfaces, using brushes, rollers, spray guns, and other related methods and techniques. Provides technical assistance, guidance, or training to lower level painters and assists higher level painters. Performs other tasks as assigned.
Basic Qualifications
+ High School graduate or equivalent.
+ Eight years directly related work experience.
+ Complete the Vehicle Body Repair Course or equivalent.
+ Apprenticeship as a painter/sandblaster is preferred.
+ Must possess a valid State motor vehicle operator license and able to obtain and maintain a Tactical Operator License as necessary.
+ Working knowledge of the operating and preventive maintenance features of sandblasting equipment and machines, cleaning characteristics of metals and nonmetals, cutting or abrasive quality of a variety of sand-like abrasives, and the optimum air pressures with specific abrasives to obtain desired finish without damage to work pieces.
+ Ability and skill to position and hold work pieces and blasting nozzles, and perform blasting operations and procedures in a safe manner.
+ Working knowledge of OSHA, SPCC, and EPA regulations concerning sandblasting procedures and the use and disposal of sandblast materials.
+ Complete the Small Boat Preservation Course, or equivalent.
+ Working knowledge of standard surface preparation and coating methods and techniques.
+ Apprenticeship as a painter in a shipyard environment.
+ Working knowledge of Occupational Safety and Health Administration (OSHA) regulations, Steel Structures Painting Council (SSPC) standards, National Association of Corrosion Engineers (NACE) standards, and Environmental Protection Agency (EPA) regulations concerning painting.
+ Medically and physically capable of wearing a respirator.
+ Able to climb ladders, work in confined spaces, in extremely high or low temperatures and at heights.
+ Able to lift 50 pounds unaided.
+ Ability to comply with all established methods, safety standards, quality standards, and time schedules applicable to this position.
+ U.S. Citizen.
+ Must be able to obtain and maintain a Common Access Card (CAC) and Base Access.
KBR Benefits
KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.
Belong, Connect and Grow at KBRAt KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together.
KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

**Corrosion Control Inspector (NACE) (5018)**
Location **Bath, ME**
Job Code **5018**
# of Openings **1**
Apply Now ( , a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a NACE Certified **Corrosion Control Inspector - Navy** to join our team in **Bath, ME.**
**Position Responsibilities:**
+ Prevent and control corrosion in hull, topside, interior, and deck surface coating systems with Navy ships.
+ Application the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
+ Conduct surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
**Position Requirements:**
+ US Citizenship.
+ Ability to obtain and maintain Base Access and an Active Secret
+ Graduate of high school, trade school, industrial school, or correspondence school in which credits were received in algebra, plane geometry, trigonometry, and physics.
+ Five (5) years of experience in the prevention and control of corrosion and in hull, topside, interior, and deck surface coating systems with Navy ships.
+ Five (5) years of experience with the application of the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
+ Familiar with corrosion control policy guidance and technical support at the Program level for NAVSEA organization, for example, in support of PEO SHIPS PMS 400D with regards to AEGIS Class (DDG-51 and CG-47) Ships.
+ Five (5) years experience Conducting surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
+ Experience reviewing and providing technical guidance on specifications being repaired for corrosion control systems to be installed on surface ships, ship construction, maintenance, and repair.
+ Experience providing technical guidance concerning the techniques involved in the inspection of preparation and application of corrosion protection systems.
+ Minimum Requirement: Must be certified by National Association of Corrosion Engineers. Must provide documentation at time of award.
**Position located in Bath, ME.**
**To Apply:** Federal Contractor
Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international.
We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

**Corrosion Control Inspector (NACE) - Navy (5019)**
Location **Pascagoula, MS**
Job Code **5019**
# of Openings **1**
Apply Now ( , a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a NACE Certified **Corrosion Control Inspector - Navy** to join our team in **Pascagoula, MS.**
**Position Responsibilities:**
+ Prevent and control corrosion in hull, topside, interior, and deck surface coating systems with Navy ships.
+ Application the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
+ Conduct surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
**Position Requirements:**
+ Graduate of high school, trade school, industrial school, or correspondence school in which credits were received in algebra, plane geometry, trigonometry, and physics.
+ Five (5) years of experience in the prevention and control of corrosion and in hull, topside, interior, and deck surface coating systems with Navy ships.
+ Five (5) years of experience with the application of the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
+ Familiar with corrosion control policy guidance and technical support at the Program level for NAVSEA organization, for example, in support of PEO SHIPS PMS 400D with regards to AEGIS Class (DDG-51 and CG-47) Ships.
+ Five (5) years experience Conducting surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
+ Experience reviewing and providing technical guidance on specifications being repaired for corrosion control systems to be installed on surface ships, ship construction, maintenance, and repair.
+ Experience providing technical guidance concerning the techniques involved in the inspection of preparation and application of corrosion protection systems.
+ Minimum Requirement: Must be certified by National Association of Corrosion Engineers. Must provide documentation at time of award.
This position is located in Pascagoula, MS.
Please apply online at: Federal Contractor
Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international.
We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.