2,466 Electrical Apprentice jobs in the United States

**Description**
**About Us** : Ardent Services, LLC was formed in 2002 to provide professional electrical and instrumentation services. Ardent Services is a leading provider of high quality, power, control, and process automation services performed safely on time and on budget, as well as a premier provider of specialty electrical and instrumentation (E&I) services for process industries throughout the country.
**Primary Tasks:** An Electrical Apprentice must provide reasonable level of assistance to the Electrician. Must work under constant supervision.
**Essential Duties**
+ Installation of electrical raceway systems comprised of rigid aluminum, galvanized steel, PVC and PVC coated conduit and aluminum, galvanized steel and fiberglass cable tray.
+ Installation of electrical devices such as light fixtures and start/stop stations.
+ Safely use electrical test equipment such as a volt-ohm meter, amp meter or megohmmeter under supervision.
+ Safe operation of hand and power tools such as band saws, drills, conduit threaders, hole punches and wire tuggers.
+ Accurately measure and bend up to 6" conduit using manual, mechanical, hydraulic and electric conduit benders.
+ Install electrical conductors (cable pulling) including accurately measuring, cutting, pulling, tagging, shaping and securing cable to wireways or welded studs.
+ Properly pack and pour seals.
+ Reasonable knowledge of the National Electrical Code and OSHA Electrical Safe Work Practices
+ Knowledge of use, limitations and maintenance of all Personal Protective Equipment required for the assigned work.
+ Knowledge of hazards and safe work procedures associated with working form elevated work areas and personnel lift equipment.
+ Knowledge of hazards and safe work procedures associated with the assigned work including but not limited to Lockout/Tagout, Confined Spaces, Emergency Action Plans, Safe Work Permits, Incident Reporting, and Hazcom procedures.
**This job description does not necessarily cover every task or duty that might be assigned. Employees may be assigned additional responsibilities as necessary. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled**
#ardent
#CB1
#LI-KL1
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights ( notice from the Department of Labor.

**Description**
**About Us** : Ardent Services, LLC was formed in 2002 to provide professional electrical and instrumentation services. Ardent Services is a leading provider of high quality, power, control, and process automation services performed safely on time and on budget, as well as a premier provider of specialty electrical and instrumentation (E&I) services for process industries throughout the country.
**Primary Tasks:** An Electrical Apprentice must provide reasonable level of assistance to the Electrician. Must work under constant supervision.
**Essential Duties**
+ Installation of electrical raceway systems comprised of rigid aluminum, galvanized steel, PVC and PVC coated conduit and aluminum, galvanized steel and fiberglass cable tray.
+ Installation of electrical devices such as light fixtures and start/stop stations.
+ Safely use electrical test equipment such as a volt-ohm meter, amp meter or megohmmeter under supervision.
+ Safe operation of hand and power tools such as band saws, drills, conduit threaders, hole punches and wire tuggers.
+ Accurately measure and bend up to 6" conduit using manual, mechanical, hydraulic and electric conduit benders.
+ Install electrical conductors (cable pulling) including accurately measuring, cutting, pulling, tagging, shaping and securing cable to wireways or welded studs.
+ Properly pack and pour seals.
+ Reasonable knowledge of the National Electrical Code and OSHA Electrical Safe Work Practices
+ Knowledge of use, limitations and maintenance of all Personal Protective Equipment required for the assigned work.
+ Knowledge of hazards and safe work procedures associated with working form elevated work areas and personnel lift equipment.
+ Knowledge of hazards and safe work procedures associated with the assigned work including but not limited to Lockout/Tagout, Confined Spaces, Emergency Action Plans, Safe Work Permits, Incident Reporting, and Hazcom procedures.
**This job description does not necessarily cover every task or duty that might be assigned. Employees may be assigned additional responsibilities as necessary. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled**
#ardent
#CB1
#LI-KL1
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights ( notice from the Department of Labor.

Overview
**About M.C. Dean**
M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.
**Why Join Us?**
Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries.
An **Electrician Apprentice** assists in the installation of electrical equipment in accordance with all applicable plans, specifications, codes and industry standards.
Responsibilities
+ Assembling, installing, testing, and maintaining electrical or electronic wiring, conduit, cable, equipment, components and devices associated with electrical equipment, following blueprints of electrical layouts and building plans.
+ Installing and mounting electronic controls, device, panels, sensors, and components.
+ Performing interlock wiring as required.
+ Testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices. Inspecting installation sites and studying work orders, building plans, and installation manuals in order to determine materials requirements and installation procedures.
+ Diagnosing malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
+ Reading contract drawings.
+ Trouble shooting EMS systems, smart breakers, and relays.
Qualifications
**Qualifications / Skills Sets / Expectations:**
+ High School diploma or GED required 0+ months of experience.
+ Reliable Transportation
+ Must successfully pass a background check and drug test
+ Must have a valid driver's license, good driving record.
+ Possibility for mandatory overtime, which may fluctuate and include night and weekend work.
+ Other duties as assigned, such as composite cleanup: removing, disposing and recycling of composite materials.
**Desired Skills:**
+ Vocational school or education training is a plus.
**Working conditions and environment:**
This position is physically demanding and often requires working outdoors while exposed to all types of weather conditions and while working in all types of environments. For example, the incumbent may be required to work, depending on the job location and the time of year, in the heat, cold, rain and snow. This position also requires working at extreme heights, in areas that are under construction, or in restricted areas such as a switchgear room, manhole, utility tunnel, crawl space or attic. The incumbent must be able to access work areas that are accessible only by O.S.H.A. approved site construction ladders or stairs that are under construction. Additionally, this position requires flexible work hours. In order to get a project completed on time, employees are often required to work overtime, weekends and night shifts. The incumbent must work in the presence of customers and their representatives with little or no interference or disruption to the customer while maintaining a professional and courteous image.
**Abilities:**
+ The position requires the ability to lift, carry, and move objects weighing up to 60 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.
+ Relocates a 12 foot stepladder without assistance.
+ Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
+ Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
+ Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
+ May use a standard ladder without exceeding the weight limit while carrying tools.
+ Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
+ Apply general rules to specific problems to produce answers that make sense.
+ Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
+ See details at close range (within a few feet of the observer).
+ Listen to and understand information and ideas presented through spoken words and sentences.

Overview
An Electrician Apprentice assists in the installation of electrical equipment in accordance with all applicable plans, specifications, codes and industry standards.
Responsibilities
+ Assembling, installing, testing, and maintaining electrical or electronic wiring, conduit, cable, equipment, components and devices associated with electrical equipment, following blueprints of electrical layouts and building plans.
+ Installing and mounting electronic controls, device, panels, sensors, and components.
+ Performing interlock wiring as required.
+ Testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices. Inspecting installation sites and studying work orders, building plans, and installation manuals in order to determine materials requirements and installation procedures.
+ Diagnosing malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
+ Reading contract drawings.
+ Trouble shooting EMS systems, smart breakers, and relays.
Qualifications
Qualifications / Skills Sets / Expectations:
+ High School diploma or GED required 0+ months of experience.
+ Reliable Transportation
+ Must successfully pass a background check and drug test
+ Must have a valid driver's license, good driving record.
+ Possibility for mandatory overtime, which may fluctuate and include night and weekend work.
+ Other duties as assigned, such as composite cleanup: removing, disposing and recycling of composite materials.
Desired Skills:
+ Vocational school or education training is a plus.
Working conditions and environment:
This position is physically demanding and often requires working outdoors while exposed to all types of weather conditions and while working in all types of environments. For example, the incumbent may be required to work, depending on the job location and the time of year, in the heat, cold, rain and snow. This position also requires working at extreme heights, in areas that are under construction, or in restricted areas such as a switchgear room, manhole, utility tunnel, crawl space or attic. The incumbent must be able to access work areas that are accessible only by O.S.H.A. approved site construction ladders or stairs that are under construction. Additionally, this position requires flexible work hours. In order to get a project completed on time, employees are often required to work overtime, weekends and night shifts. The incumbent must work in the presence of customers and their representatives with little or no interference or disruption to the customer while maintaining a professional and courteous image.
Abilities:
+ The position requires the ability to lift, carry, and move objects weighing up to (50 pounds) on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.
+ Relocates a 12 foot stepladder without assistance.
+ Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
+ Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
+ Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
+ May use a standard ladder without exceeding the weight limit while carrying tools.
+ Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
+ Apply general rules to specific problems to produce answers that make sense.
+ Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
+ See details at close range (within a few feet of the observer).
+ Listen to and understand information and ideas presented through spoken words and sentences.

Overview
**_To be considered for this position, you must attend our hiring event on 9/5/2024 at_** **_Lake Country Advanced Knowledge Center, 118 E Danville St, South Hill, VA 23970._**
**DISCLAIMER: If you do not attend the hiring event on 9/5/2024, you will not be qualified for this position.**
M.C. Dean is _Building Intelligence._ We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission-critical facilities, secure environments, complex infrastructure, and global enterprises.
Our success relies on great people delivering innovative projects and solutions for Fortune 100 companies and the most recognized agencies in government, defense, and security.
Join our more than 4,500 employees worldwide who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together we are creating the integrated systems and technologies that shape the built and cyber-physical world.
**We offer an excellent benefits package including:**
+ A competitive salary
+ Medical, dental, vision, life, and disability insurance
+ Paid time off
+ Tuition reimbursement
+ 401k Retirement Plan
+ Military Reserve pay offset
+ Paid maternity leave
An **Electrician Apprentice** assists in the installation of electrical equipment in accordance with all applicable plans, specifications, codes and industry standards.
**JOB REQUIREMENTS:**
**You will assist with:**
+ Assembling, installing, testing, and maintaining electrical or electronic wiring, conduit, cable, equipment, components and devices associated with electrical equipment, following blueprints of electrical layouts and building plans.
+ Installing and mounting electronic controls, device, panels, sensors, and components.
+ Performing interlock wiring as required.
+ Testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices.
+ Inspecting installation sites and studying work orders, building plans, and installation manuals in order to determine materials requirements and installation procedures.
+ Diagnosing malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
+ Reading contract drawings.
+ Trouble shooting EMS systems, smart breakers, and relays.
**Qualifications / Skills Sets / Expectations:**
+ High School diploma or GED required with 0-6 months of experience.
+ Reliable Transportation
+ Must successfully pass a background check and drug test
+ Must have a valid driver's license, good driving record.
+ Must be committed to excellence and generate a high quality of work.
+ Must consistently report to work on time, work well with other employees to accomplish a common goal, and maintain a safe work environment.
+ Must wear an M.C. Dean, Inc. hard hat and safety glasses at all times while on the job site.
+ Must wear OSHA approved boot length pants and a shirt that covers the shoulders by seven (7) inches. These are not provided by the Company.
**Physical Abilities:**
+ Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
+ Relocates a 12-foot stepladder without assistance.
+ Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
+ Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
+ Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
+ May use a standard ladder without exceeding the weight limit while carrying tools.
+ Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
+ Apply general rules to specific problems to produce answers that make sense.
+ Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
+ See details at close range (within a few feet of the observer).
+ Listen to and understand information and ideas presented through spoken words and sentences.
**DESIRED SKILLS:**
+ Vocational school or education training is a plus.

Overview
**_To be considered for this position, you must attend our hiring event on 12/12/2024 at_** **_the_** **Sheraton Richmond Airport Hotel** **_;_** **5501 Euband Rd, Sandston, VA 23150.**
**DISCLAIMER: If you do not attend the hiring event on 12/12/2024, you will not be qualified for this position.**
M.C. Dean is _Building Intelligence._ We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission-critical facilities, secure environments, complex infrastructure, and global enterprises.
Our success relies on great people delivering innovative projects and solutions for Fortune 100 companies and the most recognized agencies in government, defense, and security.
Join our more than 4,500 employees worldwide who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together we are creating the integrated systems and technologies that shape the built and cyber-physical world.
**We offer an excellent benefits package including:**
+ A competitive salary
+ Medical, dental, vision, life, and disability insurance
+ Paid time off
+ Tuition reimbursement
+ 401k Retirement Plan
+ Military Reserve pay offset
+ Paid maternity leave
An **Electrician Apprentice** assists in the installation of electrical equipment in accordance with all applicable plans, specifications, codes and industry standards.
**JOB REQUIREMENTS:**
**You will assist with:**
+ Assembling, installing, testing, and maintaining electrical or electronic wiring, conduit, cable, equipment, components and devices associated with electrical equipment, following blueprints of electrical layouts and building plans.
+ Installing and mounting electronic controls, device, panels, sensors, and components.
+ Performing interlock wiring as required.
+ Testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices.
+ Inspecting installation sites and studying work orders, building plans, and installation manuals in order to determine materials requirements and installation procedures.
+ Diagnosing malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
+ Reading contract drawings.
+ Trouble shooting EMS systems, smart breakers, and relays.
**Qualifications / Skills Sets / Expectations:**
+ High School diploma or GED required with 0-6 months of experience.
+ Reliable Transportation
+ Must successfully pass a background check and drug test
+ Must have a valid driver's license, good driving record.
+ Must be committed to excellence and generate a high quality of work.
+ Must consistently report to work on time, work well with other employees to accomplish a common goal, and maintain a safe work environment.
+ Must wear an M.C. Dean, Inc. hard hat and safety glasses at all times while on the job site.
+ Must wear OSHA approved boot length pants and a shirt that covers the shoulders by seven (7) inches. These are not provided by the Company.
**Physical Abilities:**
+ Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
+ Relocates a 12-foot stepladder without assistance.
+ Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
+ Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
+ Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
+ May use a standard ladder without exceeding the weight limit while carrying tools.
+ Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
+ Apply general rules to specific problems to produce answers that make sense.
+ Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
+ See details at close range (within a few feet of the observer).
+ Listen to and understand information and ideas presented through spoken words and sentences.
**DESIRED SKILLS:**
+ Vocational school or education training is a plus.

**THE COMPANY**
Continental develops pioneering technologies and services for sustainable and connected mobility of people and their goods. Founded in 1871, the technology company offers safe, efficient, intelligent, and affordable solutions for vehicles, machines, traffic, and transportation. In 2023, Continental generated sales of 41.4 billion and currently employs around 200,000 people in 56 countries and markets.
ContiTech is one of the world's leading industry specialists. The Continental group sector offers its customers connected, environment-friendly, safe, and convenient industry and service solutions using a range of materials for off-highway applications, on rails and roads, in the air, under and above the ground, in industrial environments, for the food sector and the furniture industry. With about 42,000 employees in more than 40 countries and sales of some 6.8 billion euros (2023), the global industrial partner is active with core branches in Asia, Europe and North and South America.
Are you ready to shape the future with us?
Please join us and contribute to our goals with your new role as a Electrical Apprentice in the business area of Surface Solutions.
**HOW YOU WILL MAKE AN IMPACT**
Continental - Winchester has a great career opportunity for an Electrical Apprentice. Our mission is to develop a highly skilled position within the Electrical Department. The Electrical Apprentice will be involved in all aspects of plant mechanical equipment electrical function. The position will report directly to the Electrical Manager. This is a day light position (7 am - 3 pm) on a Monday - Friday schedule. The goal is that after training, education, and testing are completed then the Electrical Apprentice will become a Full-Time Electrician in our plant.
Key Duties and Responsibilities:
- New equipment installation for projects within a timely manner
- Troubleshooting and repair of existing equipment
- Responsible for preventive maintenance for existing equipment
- Timely response to projects and repair to minimize downtime for equipment and production lines
**THE ENVIRONMENT**
Safety is our highest priority and safety procedures and guidelines must always be adhered to. Applicants must be able to work in a manufacturing industrial environment and be able to wear personal protective equipment such as safety boots, safety glasses, hearing protection, etc.
**WHAT YOU WILL BRING TO THE ROLE**
+ Enrollment in a formal technical training program (vocational/college level) and/or willing to enroll in the local technical college that our plant is affiliated with for the apprenticeship
+ Must be able to work in industrial environment
+ Knowledge of electrical and electronic controls, programmable logic controllers, AC and DC drives, motor controls and instruments is a plus however we will train in these areas
+ Able to read and work from schematics and drawings
+ Experience with Microsoft Excel, Word, and Visual Basic
+ No relocation assistance or housing assistance is offered for this position
+ Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas now or in the future for this job opening
+ When an Electrical Apprentice becomes a Full-Time Electrician with our plant, they will most likely be working a 12 Hour Schedule that will be on Nightshift from 7 PM until 7 AM.
**THE PERKS**
+ Competitive Pay
+ Immediate Benefits
+ Paid Time Off
+ Employee Discounts, including tire discounts
+ Competitive Bonus Program
+ Employer 401(k) Match
+ On-Site Gym
+ And more benefits that come with working for a global industry leader!
All your information will be kept confidential according to EEO guidelines.
**EEO-Statement:**
EEO / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities for qualified individuals with a disability and protected veterans, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to or contact US Recruiting at . This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back.
Ready to drive with Continental? Take the first step and fill in the online application.

Our client is offering an exciting Electrical Apprentice opportunity in Salt Lake City, Utah . This program is designed for motivated individuals looking to build a career in the skilled trades. You will receive comprehensive on-the-job training and technical instruction to become a qualified electrician. Apprentices will work alongside experienced electricians, learning to install, maintain, and repair electrical systems in various settings. This hybrid role requires a commitment to both practical site work and remote learning modules. Responsibilities include assisting with the installation of wiring, conduit, and electrical apparatus; learning to read and interpret blueprints and technical diagrams; performing basic troubleshooting and repairs under supervision; adhering to all safety codes and regulations; and completing all assigned coursework and training modules. We are looking for individuals with a strong work ethic, a keen interest in electrical systems, and the ability to learn quickly. Basic knowledge of tools and a willingness to travel to different job sites within the **Salt Lake City, Utah** area is essential. This apprenticeship provides a pathway to a rewarding and stable career. The program duration is typically four years, during which apprentices will earn progressively higher wages. Upon successful completion, you will be eligible for journeyman electrician certification. Our client is committed to fostering a supportive learning environment and providing the necessary resources for success. This is an excellent opportunity to gain hands-on experience and develop valuable skills in a growing industry. Join our team and help build the future of electrical infrastructure. Embrace the challenge and opportunity to grow both personally and professionally. The apprenticeship blends practical application with theoretical knowledge, ensuring a well-rounded educational experience. We value safety above all else and expect all apprentices to prioritize safe working practices at all times. This role demands dedication and a proactive attitude towards learning and problem-solving. Candidates must be reliable and able to commit to the full duration of the apprenticeship program. Physical stamina and the ability to work in various weather conditions may be required. Strong problem-solving abilities and attention to detail are crucial. This apprenticeship is a stepping stone to a lifelong career with excellent earning potential and job security.

Responsibilities:

• Assist licensed electricians with electrical installations and repairs.
• Learn to read and interpret electrical blueprints and schematics.
• Install wiring, conduit, lighting fixtures, and other electrical components.
• Perform basic electrical testing and troubleshooting under supervision.
• Maintain a clean and safe work environment.
• Adhere to all electrical codes, safety regulations, and company policies.
• Complete assigned training courses and apprenticeship modules.
• Operate hand and power tools safely and effectively.
• Document work performed and materials used.

Qualifications:

• High school diploma or equivalent.
• Strong mechanical aptitude and problem-solving skills.
• Excellent manual dexterity and physical coordination.
• Ability to work in a team environment and follow instructions.
• Reliable transportation and willingness to travel to various job sites in the **Salt Lake City, Utah** area.
• Must be at least 18 years of age.
• Pass a background check and drug screening.
• Commitment to completing the full apprenticeship program.
• Basic understanding of tools and construction environments is a plus.

Our client is actively seeking motivated and eager individuals to join our team as Electrical Apprentices in Virginia Beach, Virginia, US . This is a fantastic opportunity to embark on a rewarding career in the skilled trades, receiving comprehensive on-the-job training and classroom instruction under the guidance of experienced electricians. You will learn all aspects of the electrical trade, from basic wiring and conduit bending to troubleshooting complex electrical systems in residential, commercial, and industrial settings. Our apprenticeship program is designed to provide a clear career path, leading to journeyman and master electrician certifications upon successful completion.

As an Electrical Apprentice, your responsibilities will include:

• Assisting journey-level electricians in the installation, maintenance, and repair of electrical systems.
• Reading and interpreting blueprints, schematics, and electrical diagrams.
• Learning to safely operate hand and power tools and electrical testing equipment.
• Pulling electrical wires and cables through conduits.
• Installing electrical components such as switches, outlets, circuit breakers, and light fixtures.
• Participating in on-site training sessions and classroom learning modules.
• Adhering strictly to all safety regulations and company policies.
• Maintaining a clean and organized work environment.
• Troubleshooting and diagnosing electrical issues under supervision.
• Learning to test circuits and continuity of electrical wiring.

Ideal candidates will have a strong work ethic, a willingness to learn, and a commitment to safety. A high school diploma or GED is required. Previous experience in a trade or construction environment is a plus, but not mandatory. Must be physically capable of performing the duties of the job, which may include climbing ladders, working in confined spaces, and lifting heavy materials. Excellent manual dexterity and problem-solving skills are highly valued. We are looking for individuals who are reliable, punctual, and possess a positive attitude. Join us and build a solid career in a growing industry. This is a hands-on role requiring dedication and a passion for mastering a valuable skill.