31 Electrical Services jobs in the United States

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform the everyday with us** **!**
**Electrical Service Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies.
**As an Electrical Service Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 8+ years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 8+ years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 8+ years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ **Must be willing to travel out-of-state 50% of time to help in the southeast area. (Louisiana to Florida and up to North Carolina)**
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-TAG #Zone7-EREF switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$64,960 $111,360
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform the everyday with us** **!**
**Senior Electrical Services Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies.
**As a Senior Electrical Service Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 8+ years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 8+ years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 8+ years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ **Must be willing to travel out-of-state 50% of time to help in the southeast area. (Louisiana to Florida and up to North Carolina)**
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-KS1 #Zone7-EREF switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$64,960 $111,360
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?  
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform** **the everyday** **with us** **!**
**Senior Electrical Services Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies. **This position supports Amarillo, Texas area.**
**As a Senior Electrical Services Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 3 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 3 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 3 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
+ 5 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 5 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 5 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-TAG switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$66,259 $111,587
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?  
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform** **the everyday** **with us** **!**
**Senior Electrical Services Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies. **This position supports the DFW metropolitan area.**
**As a Senior Electrical Services Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 3 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 3 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 3 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
+ 5 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 5 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 5 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-SK1 #Zone7-EREF switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$71,330 $122,280
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?  
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform** **the everyday** **with us** **!**
**Senior Electrical Services Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies. **This position supports the DFW metropolitan area.**
**As a Senior Electrical Services Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 3 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 3 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 3 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
+ 5 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 5 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 5 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-SK1 #Zone7-EREF switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$71,330 $122,280
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?  
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform** **the everyday** **with us** **!**
**Senior Electrical Services Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies. **This position supports the DFW metropolitan area.**
**As a Senior Electrical Services Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 3 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 3 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 3 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
+ 5 years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 5 years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 5 years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-SK1 #Zone7-EREF switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$71,330 $122,280
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.  
**Transform the everyday with us** **!**
**Electrical Service Specialists** perform complex startup, commissioning, maintenance, and troubleshooting of medium and low voltage electrical power systems. These power systems include, but are not limited to transformers, circuit breakers, switchgear/switchboard, protective relays, motor control centers, VFDs, cable, and metering and backup power supplies.
**As an Electrical Service Specialist, you will:**
+ Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices. Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance.
+ Install wiring and connect to the power source. Perform emergency troubleshooting of power distribution products and third-party equipment. Perform complex service upgrades, reconditioning, retrofits, etc. for low-voltage power distribution products and systems.
+ Perform onsite technical and operational support in the design, development, installation, and maintenance of equipment and systems of a complex nature. Perform complex site surveys to develop base or installation design plans.
+ Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment. Provide expert advice, training, and technical assistance to support staff and train lower-level employees. Complete and submit reports covering all job activity. Responsible for maintaining complex tools, test equipment, calibration items, etc.
+ Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals. Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration.
+ Must be available to respond to emergency and relief assignments.
**You will make an impact with these qualifications:**
Basic qualifications:
+ High school diploma or state-recognized GED
+ 8+ years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification
+ 8+ years of experience with electrical testing, including but not limited to primary current injection testing, resistance testing, dielectric testing, and thermal scans on medium and low-voltage electrical systems
+ 8+ years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures
+ On-the-job or educational experience with:
+ Interpreting protective coordination studies and testing and configuring protective relays
+ Reading bills of material, electrical blueprints, and power system study reports
+ Installation, commissioning, and maintenance of low and medium voltage power distributions systems
+ The arc flash and shock hazards of 13.8 kV and the following electrical equipment: Siemens GIS, AIS, WL, RL, and SB breakers and switchgear
+ ANSI, NEC, NFPA, IEEE, and NETA codes and standards
+ Must be able and willing to carry and move equipment and tools weighing up to 75 pounds unassisted
+ Experience with Microsoft Office (Word, Excel, and Outlook)
+ Must be 18 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Associate Degree
+ AVO, NETA, and NICET certifications
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#LI-SK1, switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA  
$71,330 $122,280
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Customer Services

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways. Who knows where our shared journey will take you?  
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.
**Transform the everyday with us!**
**Electrical Services Project Managers**  manage projects specific to the Electrical Service business. These projects focus on low / medium power distribution systems including switchgear, motor controls, circuit breakers, panel boards, transformers, surge protection devices, vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance. Activities include planning, estimating, design, installation, start-up, commissioning, turnover and warranty of assigned projects while ensuring customer satisfaction during and at final project completion **.** Our Electrical Service Project Managers are vital for ensuring the successful execution of electrical projects, maintaining customer satisfaction, adhering to quality and safety standards, and contributing to Siemens' growth and reputation in the industry. 
**As an Electrical Services Project Manager, you will:**
+ Engage in pre-bid reviews, pre-job walks, and scoping sessions, collaborating with cross-functional teams to assess the accuracy of sales estimates and project layouts. Analyze available one-line drawings, site documentation, plans, contract specifications, and codes to define comprehensive project requirements
+ Lead the development of project plans ahead of project commencement. Ensure these plans effectively guide the Project Team towards successful execution
+ Engage in on-site project management when required, closely monitoring project progress to verify adherence to the predetermined execution plan
+ Utilize financial and monthly forecasting tools to manage and contain project costs. Collaborate with team members to monitor, manage, and control costs effectively
+ Obtain bids and select reputable subcontractors to provide supplementary test equipment and support during project execution
+ Facilitate final job site walk-throughs, overseeing the completion of all closing documentation, including acceptance reports, updates to one-line drawings, and comprehensive project close-out records. Manage collections, payments, and ensure meticulous project record-keeping
**You will make an impact with these qualifications: **  
Basic Qualifications:
+ High school diploma or state-recognized GED
+ 2+ years of experience in the installation, maintenance, engineering, or project management of low / medium voltage power distribution systems as noted in the position overview
+ Must be able to demonstrate
+ Ability to read and understand construction drawings, including mechanical and electrical drawings
+ Ability to provide leadership and input to others as requested or required to assist in the accurate estimation, design, installation, start up, commissioning, and training for building systems
+ Must be 21 years of age and possess a valid driver's license with limited violations
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
Preferred Qualifications:
+ Bachelor of Electrical Engineering degree
+ 5+ years' experience in the installation, maintenance, engineering, or project management of low / medium voltage power distribution systems as noted in the position overview
+ PMP Certification
+ NETA or NICET Certification
**Ready to create your own journey?**  Join us today.
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us.
#Zone7-EREF #LI-KS1 #LI-POST switchgear, motor controls, circuit breaker, panel board, transformer, surge protection, relay, vfd, variable frequency drive, power, AVO, NETA, NICET, arc flash, ANSI, NEC, NFPA, IEEE, NETA 
$54,180 $92,880 5%
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Project Management

**Job Family:** Buildings
**Req ID:**
Here at Siemens, we take pride in enabling sustainable progress through technology. We do this through empowering customers by combining the real and digital worlds. Improving how we live, work, and move today and for the next generation! We know that the only way a business thrives is if our people are thriving. That's why we always put our people first. Our global, diverse team would be happy to support you and challenge you to grow in new ways.  **Who knows where our shared journey will take you?**
Our Smart Buildings help to create efficient, safe, adaptable, and responsible environments. Our aim isn't just about improving buildings; it's about creating perfect places that improve people's lives.
**Transform the everyday with us!**
The **Electrical Services Account Executive** is a technical sales professional that is key to growing the Electrical Services business in vertical markets such as Healthcare, Corporate Real Estate, Data Centers, K-12, Universities, Federal and State facilities. Why is this so important? Our Account Executives are ambassadors of quality Siemens technology, products and services, and your technical and financial expertise, along with critical thinking and negotiation skills, will help tailor our customer's needs into winning solutions, for the direct end-user service market.
**_This position supports the greater Philadelphia area. While our office is located in Harleysville, PA, most of your time will be spent at customer locations or working from a home office, with occasional in-office requirements._**
As an  **Electrical Services Account Executive,** you will:
+ Develop a vertical market(s) and geographic account management with a strategic growth plan and educate the market and customers on Siemens electrical service capabilities and identify opportunities to address customer needs with Siemens solutions and services
+ Attend industry specific networking events and actively participate in organizations as a representative for Siemens in the electrical service market and develop and maintain a qualified funnel of electrical service opportunities with emphasis on pipeline management (award and execution dates)
+ Deliver on forecasted results consistently and be capable of identifying and qualifying powers system study opportunities with follow-up remediation, electrical service projects focused on low (600 V) and medium voltage (5-38kV) for both greenfield and brownfield, electrical service agreements, and product refurbishment/retrofit/upgrade opportunities
+ Position Siemens as an industry leader among electrical service providers and position electrical service as a key Siemens differentiator to customers and prospects and early involvement with target customers to influence their specifications and drive the acceptance of our electrical products and service solutions
+ Work jointly with the multiple levels of the customer's organization to understand and document their business goals and how success is measured; align the customers objectives with services to ensure that their electrical systems perform as required to achieve their business goals and support the development of value-based sales proposals, and estimates
+ Ensure an accurate and timely sales to operations turnover and monitors progress; assist with conflict management and improving customer satisfaction
+ Stay involved with the customer to grow the Service Agreement when renewed by proposing additional customer valued services from the comprehensive Siemens portfolio
+ Assist customers and potential customers with problems involving the use of company products and services and recommends suitable resolutions accordingly and successfully collaborate with product and service regional business developers and other local sales channels/account managers to drive mutual growth
+ Collaborate with operations and internal teams to deliver excellent customer outcomes; work with operations, finance, legal and other inside and outside resources as needed to complete a compelling proposal and close the sale
+ Travel overnight up to 10% for training and business development
**You will make an impact with these qualifications:**
_Basic Qualifications: _
+ 7+ years of sales, business development, or consulting experience within the electrical industry
+ Strong technical and commercial knowledge of electrical distribution equipment (120V- 38,000V) systems and applications required, preferably within all previously mentioned targeted markets
+ Must be willing and available to travel 10% overnight for training and business development
+ Financial expertise to estimate and sell technical solutions and service offerings effectively and independently 
+ Account development and strategic sales skills 
+ Excellent verbal and written communication skills in English and excellent organizational, presentation, and negotiation skills with proficiency in Microsoft Office suite 
+ Must be 21 years of age and possess a valid driver's license with limited violations; must meet eligibility requirements to Siemens' vehicle program
+ Legally authorized to work in the United States on a continual and permanent basis without company sponsorship
_Preferred Qualifications:_
+ Bachelor's Degree in Mechanical/Electrical Engineering
+ Experience in other electrically focused industries such as Utility, Industrial, Distributor, or Contractor is a plus.
+ Knowledge of and strong networking relationships within the local electrical market is strongly desired
+ Experience or general understanding of arc flash, switchgear, surge protection, panel boards, circuit breakers, IEEE, NETA, NEC, ANSI.
**Ready to create your own journey?**  Join us today!
**About Siemens:**  
We are a global technology company focused on industry, infrastructure, transport, and healthcare. From more resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare, we create technology with purpose adding real value for customers.  
**Our Commitment to Equity and Inclusion in our Diverse Global Workforce**
We value your unique identity and perspective. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society, while ensuring that we attract the best talent based on qualifications, skills, and experiences. We welcome you to bring your authentic self and transform the everyday with us. #LI-DRR
$80,000 $138,000
**Organization:** Smart Infrastructure
**Job Type:** Full-time
**Category:** Sales