138 Engineering jobs in Maine

**Civil Engineering Intern (Substations)- Summer 2026**
Location **Augusta**
Secondary Locations
Job Code **18620**
# of openings **1**
Apply Now ( Opportunity - Civil** **Engineering Intern (Substations) - Summer 2026**
POWER Engineers, Member of WSP USA, is seeking a **Full Time Civil Engineering Intern (Substations) - Summer 2026** to work out of our **Augusta, ME** office. This temporary position is seeking individuals currently enrolled in an Undergraduate or Graduate degree program.
WSP USA hosts hundreds of internships across the United States to gain hands-on, meaningful work experience to enhance their education and professional aptitude. Our interns gain exposure to real projects while working side by side with senior staff. Through our Developing Professionals Network, interns gain mentorship, networking opportunities and lifelong career connections.
This internship is anticipated to take place during the Summer 2026 semester. The program is anticipated to take place from May 18, 2026 through August 7, 2026. The individual start date is flexible.
**Your Impact**
+ Support a variety of engineering tasks with the goal to develop technical, social, and ethical skills.
+ Learn basic principles of Civil Engineering.
+ Assist with and participate in design activities for electrical substations
+ Support preparation of final design plans, special provisions, and cost estimates.
+ Assist in collecting and maintaining project documentation.
+ Complete training on assigned tasks.
+ Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures.
+ Perform additional responsibilities as required by business needs.
+ Please note that there is no relocation or housing assistance associated with this internship. 
**Who You Are**
**Required Qualifications**
+ Actively enrolled in an accredited Civil Engineering, or related, Undergraduate program with an anticipated graduation date of August 2026 or later.
+ Must be 18 or older.
+ Demonstrated interest in Civil Engineering, consulting engineering and the electric utility industry, or related field, and have a strong desire to advance skills related to WSP's work and projects.
+ Competent interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience.
+ Capable of taking direction from leadership, mentors, and managers to executive projects.
+ Basic proficiency with technical writing, office automation, software, spreadsheets, technology, and tools.
+ Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies.
+ Authorization to work in the United States at the start of the internship. 
**Preferred Qualifications**
+ Actively enrolled in an accredited Civil Engineering, or related, Masters or PhD program with an anticipated graduation date of August 2026 or later.
+ Prior internship and leadership involvement on campus. 
POWER Engineers, Member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. Together, POWER and WSP's 73,900 experts create positive, long-lasting impacts for our communities and our clients in the power and energy, transportation and infrastructure, environmental, and property and buildings sectors. As part of our team, you'll discover a world of opportunities to connect with innovative thinkers, forge your path, and have fun tackling the world's most challenging projects.
At POWER Engineers, Member of WSP, you can have a rewarding career on every level. Our philosophy is simple: Do Good. Have Fun. Build Success.
We are a fun engineering firm. That might seem contradictory to some, but it works for us!
POWER is an Equal Opportunity Employer, including women, minorities, veterans and individuals with disabilities.
#LI-GA1

Engineering Manager - Solutions Engineering

Join to apply for the Engineering Manager - Solutions Engineering role at Canonical

Canonical is a leading provider of open source software and operating systems to the global enterprise and technology markets. Our platform, Ubuntu, is widely used in enterprise initiatives such as public cloud, data science, AI, engineering innovation, and IoT. Our customers include top public cloud and silicon providers, as well as industry leaders across sectors. We are a pioneer in global distributed collaboration, with over 1200 colleagues in 75+ countries and few office-based roles. Teams meet a few times yearly in interesting locations worldwide to align on strategy and execution.

We are founder-led, profitable, and growing. Our goal is to transform software operations through true model-driven operations via next-generation infrastructure-as-code, enabling efficient bare-metal operations for high-performance computing, private cloud, data lakes, AI/ML, and analytics. We seek a leader to inspire and manage a regional software engineering team to drive this initiative.

The Solutions Engineering team collaborates closely with our managed infrastructure operations team, managing private OpenStack clouds and Kubernetes clusters globally. We develop open-source automation in Python to simplify operations for users building on Ubuntu. The team focuses on high-quality Python software development to enable DevOps workflows, emphasizing design, documentation, testing, and performance to ensure a robust platform.

As an Engineering Manager, your primary responsibility is your team: ensuring their growth, meaningful work, and career satisfaction at Canonical. You will demonstrate technical leadership, leveraging your software development background to challenge and develop team members. You will influence culture, facilitate technical delivery, and work on strategic direction and execution.

What you will do

• Lead and develop a remote team of Python engineers worldwide
• Hire, coach, mentor, provide feedback, and support career development
• Contribute code demonstrating sound engineering principles
• Plan and oversee progress on goals and projects
• Set and manage expectations with other teams and stakeholders
• Promote modern, agile development practices
• Develop and advocate for engineering and organizational best practices
• Foster a healthy, collaborative engineering culture aligned with company values
• Participate in leadership discussions and collaborate with other leaders
• Travel up to 10% globally for events

Who you are

• You love developing people and have a proven track record
• You are passionate about agile software development
• You enjoy leading, coaching, and mentoring Python developers
• You have knowledge of cloud computing concepts and technologies
• You are comfortable managing Linux servers, including storage and networking
• You have hands-on experience with software automation
• You are organized and committed to delivering high-quality software on time
• You are a lifelong learner

Bonus points for

• Degree in Computer Science or related field
• Understanding of modern infrastructure like OpenStack or Kubernetes
• Experience in operations alongside software development
• Familiarity with large-scale, multi-cloud operations challenges
• Go programming expertise

What we offer colleagues

• Distributed work environment with biannual in-person team sprints
• USD 2,000 annual learning and development budget
• Annual compensation review
• Recognition rewards, holiday leave, maternity/paternity leave
• Wellness programs and assistance
• Opportunities for travel and meeting colleagues globally

About Canonical

Canonical pioneers open source innovation, publishing Ubuntu, a key platform for AI, IoT, and cloud. We recruit globally, uphold high standards, and foster a remote-first culture since 2004. Working here challenges you to think differently, learn new skills, and excel.

Canonical is an equal opportunity employer

We value diversity, experience, and perspectives, ensuring fair consideration for all applicants regardless of background or identity.

#J-18808-Ljbffr

**42467BR**
**Requisition ID:**
42467BR
**Business Unit:**
IND
**Job Description:**
We are seeking a highly skilled Electrical Engineering Leader to provide expert technical guidance and oversight of the electrical engineering group. This role involves managing an industrial engineering team to deliver a variety of industrial design projects for the chemical, power, utilities, and manufacturing industries. The ideal candidate will have experience with designing and retrofitting industrial power distribution systems and substations. Additionally, the candidate should possess strong leadership skills and the ability to drive innovation in electrical engineering practices.
Preferred locations include: Wadsworth, OH; Columbus, OH; Pittsburgh, PA; Philadelphia, PA; as well as CDM Smith offices located in New Jersey, New York, Virginia, and Georgia.
Key Responsibilities:
Team Management: Manage and supervise an industrial engineering team, providing technical guidance, training, and mentorship to junior staff.
Technical Oversight: Independently oversee and provide expert guidance on complex electrical system designs to meet client project requirements.
Compliance Review: Review draft designs for compliance with federal, state, and local regulations, and sign off on completed designs.
Policy Adherence: Ensure all designs follow firm policies, quality, and practices.
Site Reviews: Perform site reviews and studies to ensure designs align with location specifications, updating design requirements as necessary.
Knowledge Contribution: Develop white papers and technical design documentation for new or special case designs, and submit technical papers for publication in journals.
Proposal Collaboration: Work with sales staff to create proposals in response to RFPs, ensuring adherence to regulations and best practices.
Client Engagement: Meet with current and potential clients to review their design needs and provide technical guidance.
Industry Visibility: Attend conferences and symposia to enhance the visibility of the firm's products and services.
Primary Contact: Act as the main point of contact for external clients and industry contacts, collaborating with clients and government officials to clarify technical questions.
Project Updates: Provide updates to project management as necessary.
Mentorship: Mentor junior staff to develop their skills and prepare them for future growth within the firm.
**Job Title:**
Electrical Engineering Leader
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline.
Professional engineering (PE) license.
15 years of related experience.
Domestic and/or international travel may be required.
The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
Equivalent additional directly related experience will be considered in lieu of a degree.
**Preferred Qualifications:**
Ability to supervise the work of others.
Proven experience leading a team of industrial electrical engineers
Understanding of FEL, FEED delivery process
Experience with progressive design build and design build delivery methods.
Strong communication and organizational skills
Ability to obtain licensing in multiple states
Ability to provide detailed engineering estimate
Ability to maintain project budget and schedule
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
10%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Excellent verbal and written communications skills.
Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.).
Expert knowledge of federal, state and local regulations.
Expert knowledge of engineering design tools including power system studies
Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$133,016
**Pay Range Maximum:**
$246,043
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**42467BR**
**Requisition ID:**
42467BR
**Business Unit:**
IND
**Job Description:**
We are seeking a highly skilled Electrical Engineering Leader to provide expert technical guidance and oversight of the electrical engineering group. This role involves managing an industrial engineering team to deliver a variety of industrial design projects for the chemical, power, utilities, and manufacturing industries. The ideal candidate will have experience with designing and retrofitting industrial power distribution systems and substations. Additionally, the candidate should possess strong leadership skills and the ability to drive innovation in electrical engineering practices.
Preferred locations include: Wadsworth, OH; Columbus, OH; Pittsburgh, PA; Philadelphia, PA; as well as CDM Smith offices located in New Jersey, New York, Virginia, and Georgia.
Key Responsibilities:
Team Management: Manage and supervise an industrial engineering team, providing technical guidance, training, and mentorship to junior staff.
Technical Oversight: Independently oversee and provide expert guidance on complex electrical system designs to meet client project requirements.
Compliance Review: Review draft designs for compliance with federal, state, and local regulations, and sign off on completed designs.
Policy Adherence: Ensure all designs follow firm policies, quality, and practices.
Site Reviews: Perform site reviews and studies to ensure designs align with location specifications, updating design requirements as necessary.
Knowledge Contribution: Develop white papers and technical design documentation for new or special case designs, and submit technical papers for publication in journals.
Proposal Collaboration: Work with sales staff to create proposals in response to RFPs, ensuring adherence to regulations and best practices.
Client Engagement: Meet with current and potential clients to review their design needs and provide technical guidance.
Industry Visibility: Attend conferences and symposia to enhance the visibility of the firm's products and services.
Primary Contact: Act as the main point of contact for external clients and industry contacts, collaborating with clients and government officials to clarify technical questions.
Project Updates: Provide updates to project management as necessary.
Mentorship: Mentor junior staff to develop their skills and prepare them for future growth within the firm.
**Job Title:**
Electrical Engineering Leader
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline.
Professional engineering (PE) license.
15 years of related experience.
Domestic and/or international travel may be required.
The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
Equivalent additional directly related experience will be considered in lieu of a degree.
**Preferred Qualifications:**
Ability to supervise the work of others.
Proven experience leading a team of industrial electrical engineers
Understanding of FEL, FEED delivery process
Experience with progressive design build and design build delivery methods.
Strong communication and organizational skills
Ability to obtain licensing in multiple states
Ability to provide detailed engineering estimate
Ability to maintain project budget and schedule
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
10%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Excellent verbal and written communications skills.
Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.).
Expert knowledge of federal, state and local regulations.
Expert knowledge of engineering design tools including power system studies
Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$133,016
**Pay Range Maximum:**
$246,043
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**42467BR**
**Requisition ID:**
42467BR
**Business Unit:**
IND
**Job Description:**
We are seeking a highly skilled Electrical Engineering Leader to provide expert technical guidance and oversight of the electrical engineering group. This role involves managing an industrial engineering team to deliver a variety of industrial design projects for the chemical, power, utilities, and manufacturing industries. The ideal candidate will have experience with designing and retrofitting industrial power distribution systems and substations. Additionally, the candidate should possess strong leadership skills and the ability to drive innovation in electrical engineering practices.
Preferred locations include: Wadsworth, OH; Columbus, OH; Pittsburgh, PA; Philadelphia, PA; as well as CDM Smith offices located in New Jersey, New York, Virginia, and Georgia.
Key Responsibilities:
Team Management: Manage and supervise an industrial engineering team, providing technical guidance, training, and mentorship to junior staff.
Technical Oversight: Independently oversee and provide expert guidance on complex electrical system designs to meet client project requirements.
Compliance Review: Review draft designs for compliance with federal, state, and local regulations, and sign off on completed designs.
Policy Adherence: Ensure all designs follow firm policies, quality, and practices.
Site Reviews: Perform site reviews and studies to ensure designs align with location specifications, updating design requirements as necessary.
Knowledge Contribution: Develop white papers and technical design documentation for new or special case designs, and submit technical papers for publication in journals.
Proposal Collaboration: Work with sales staff to create proposals in response to RFPs, ensuring adherence to regulations and best practices.
Client Engagement: Meet with current and potential clients to review their design needs and provide technical guidance.
Industry Visibility: Attend conferences and symposia to enhance the visibility of the firm's products and services.
Primary Contact: Act as the main point of contact for external clients and industry contacts, collaborating with clients and government officials to clarify technical questions.
Project Updates: Provide updates to project management as necessary.
Mentorship: Mentor junior staff to develop their skills and prepare them for future growth within the firm.
**Job Title:**
Electrical Engineering Leader
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline.
Professional engineering (PE) license.
15 years of related experience.
Domestic and/or international travel may be required.
The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
Equivalent additional directly related experience will be considered in lieu of a degree.
**Preferred Qualifications:**
Ability to supervise the work of others.
Proven experience leading a team of industrial electrical engineers
Understanding of FEL, FEED delivery process
Experience with progressive design build and design build delivery methods.
Strong communication and organizational skills
Ability to obtain licensing in multiple states
Ability to provide detailed engineering estimate
Ability to maintain project budget and schedule
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
10%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Excellent verbal and written communications skills.
Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.).
Expert knowledge of federal, state and local regulations.
Expert knowledge of engineering design tools including power system studies
Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$133,016
**Pay Range Maximum:**
$246,043
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**42467BR**
**Requisition ID:**
42467BR
**Business Unit:**
IND
**Job Description:**
We are seeking a highly skilled Electrical Engineering Leader to provide expert technical guidance and oversight of the electrical engineering group. This role involves managing an industrial engineering team to deliver a variety of industrial design projects for the chemical, power, utilities, and manufacturing industries. The ideal candidate will have experience with designing and retrofitting industrial power distribution systems and substations. Additionally, the candidate should possess strong leadership skills and the ability to drive innovation in electrical engineering practices.
Preferred locations include: Wadsworth, OH; Columbus, OH; Pittsburgh, PA; Philadelphia, PA; as well as CDM Smith offices located in New Jersey, New York, Virginia, and Georgia.
Key Responsibilities:
Team Management: Manage and supervise an industrial engineering team, providing technical guidance, training, and mentorship to junior staff.
Technical Oversight: Independently oversee and provide expert guidance on complex electrical system designs to meet client project requirements.
Compliance Review: Review draft designs for compliance with federal, state, and local regulations, and sign off on completed designs.
Policy Adherence: Ensure all designs follow firm policies, quality, and practices.
Site Reviews: Perform site reviews and studies to ensure designs align with location specifications, updating design requirements as necessary.
Knowledge Contribution: Develop white papers and technical design documentation for new or special case designs, and submit technical papers for publication in journals.
Proposal Collaboration: Work with sales staff to create proposals in response to RFPs, ensuring adherence to regulations and best practices.
Client Engagement: Meet with current and potential clients to review their design needs and provide technical guidance.
Industry Visibility: Attend conferences and symposia to enhance the visibility of the firm's products and services.
Primary Contact: Act as the main point of contact for external clients and industry contacts, collaborating with clients and government officials to clarify technical questions.
Project Updates: Provide updates to project management as necessary.
Mentorship: Mentor junior staff to develop their skills and prepare them for future growth within the firm.
**Job Title:**
Electrical Engineering Leader
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline.
Professional engineering (PE) license.
15 years of related experience.
Domestic and/or international travel may be required.
The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
Equivalent additional directly related experience will be considered in lieu of a degree.
**Preferred Qualifications:**
Ability to supervise the work of others.
Proven experience leading a team of industrial electrical engineers
Understanding of FEL, FEED delivery process
Experience with progressive design build and design build delivery methods.
Strong communication and organizational skills
Ability to obtain licensing in multiple states
Ability to provide detailed engineering estimate
Ability to maintain project budget and schedule
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
10%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Excellent verbal and written communications skills.
Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.).
Expert knowledge of federal, state and local regulations.
Expert knowledge of engineering design tools including power system studies
Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$133,016
**Pay Range Maximum:**
$246,043
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**We are Generac, a leading energy technology company committed to powering a smarter world.**
Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries.
**About the Role**
We're growing our engineering team and looking for a Manager of Electrical Engineering to lead new product development of power electronics for energy storage and control systems.
This role is focused on designing and delivering power electronics hardware that integrates tightly with firmware, power subsystems, and mechanical assemblies. You'll guide a team of electrical engineers through full product lifecycles - from concept and prototyping to design validation and transfer to manufacturing.
The right candidate is execution-driven and capable of scaling a high-performing development team. They are excited and passionate about being in the lab, solving problems alongside the team.
**Key Responsibilities**
· Lead the Power Electronics EE team responsible for Power Electronics hardware design, development, and validation for CES energy products
· Deliver full product lifecycle execution: schematic design, layout guidance, bring-up, lab validation, and design for test/manufacture
· Architect and review designs for analog signal conditioning, digital interfaces, MCUs, sensors, and communication buses (e.g., CAN, UART, RS485)
· Partner closely with firmware, mechanical, test, and manufacturing teams to deliver highly integrated, production-ready designs
· Drive product builds across EVT/DVT/PVT, managing technical risk and coordinating with contract manufacturers and test partners
· Provide technical mentorship, design reviews, and team development leadership
· Support sustaining improvements and field issue resolution as part of ongoing product maturity
**Minimum Qualifications**
· BSEE or MSEE with 7+ years of experience in power electronics hardware development
· Strong background in power electronics design, embedded systems, and board-level hardware architecture
· Hands-on lab experience with board bring-up, validation, debugging, and test automation tools
· Familiar with design constraints related to thermal, EMC, safety, and manufacturability
· Track record of cross-functional execution in new product development settings
· Prior experience with design documentation, ECO control, and sustaining engineering
· Experience with high quality, high reliability products. Long warranty, high stress environments.
· Experience in PCB engineering including fabrication and assembly technologies, strain/stress analysis, thermal management, and connector/cable engineering
**Preferred Qualifications**
· Experience with energy systems, IoT devices, or embedded hardware in regulated environments
· Exposure to compliance testing (UL/IEC/EMC) and design transfer to contract manufacturing
· Experience with production at scale, 1M+ units shipped
· Knowledge of low-power design, sensor integration, or signal integrity optimization
· Leadership experience building or scaling hardware development teams
· Embedded Firmware experience
· Understanding of mechanical engineering physics such as boundary/force diagrams, stress/strain, 1D thermodynamics, and basic manufacturing techniques (CNC, molding, laser cutting, and 3D printing)
**Why Join Us**
This is a new product development role, not a maintenance job. You'll shape CES's next wave of power electronics platforms, mentor a growing team, and ensure we deliver robust, high-integrity systems that perform in the field. South Portland is a critical execution hub for CES - and you'll be at the center of making it run.
#LI-AI1
**Physical Demands** : While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel.
_"We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law."_
Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries.
As one of the leaders and largest suppliers of power generation equipment and technology, the work we do touches millions of lives. Employees at Generac are encouraged to be innovative and are valued as an integral part of our global team. Our challenging goals develop knowledgeable employees dedicated to helping continue Generac's success. Generac provides individuals the opportunity to work in a fast-paced agile work environment where their work makes a difference in people's lives and their own.

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.