224 Engineering jobs in New Hampshire

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

**41909BR**
**Requisition ID:**
41909BR
**Business Unit:**
IND
**Job Description:**
Creates moderate to highly complex designs of electric master system plans, power system, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems.
Executes a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporates changes to designs or sketches and redlines or mark-ups on ongoing projects.
Contributes to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations.
Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications.
Updates design requirements as necessary.
Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.
Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs).
Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs.
Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff.
Provides technical guidance and training to more junior staff.
Mentors more junior staff and develops them for future growth within the discipline and firm.
Performs other duties as required.
**Job Title:**
Electrical Engineering Specialist (Substation)
**Group:**
IND
**Employment Type:**
Regular
**Minimum Qualifications:**
Bachelor's degree.
7 years of related experience.
Equivalent additional directly related experience will be considered in lieu of a college degree.
Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands.
**Preferred Qualifications:**
Experience leading substation engineering projects through 345kV.
Proficiency in protective relay schemes and creating relay schematics/wiring diagrams.
Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware.
Familiarity with NESC and NEC standards.
Knowledge of substation grounding grid design and lightning protection systems.
**EEO Statement:**
We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law.
**Why CDM Smith?:**
Check out this video and find out why our team loves to work here! ( Us! CDM Smith - where amazing career journeys unfold.**
Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family.
Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world.
**Job Site Location:**
United States - Nationwide
**Agency Disclaimer:**
All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee.
**Amount of Travel Required:**
5%
**Assignment Category:**
Fulltime-Regular
**Visa Sponsorship Available:**
No - We will not support sponsorship, i.e. H-1B or TN Visas for this position
**Skills and Abilities:**
Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices.
Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.).
Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner.
Ability to work effectively across all levels in a highly dynamic environment. Strong
analytical and problem-solving skills. Good knowledge of federal, state and local regulations.
**Background Check and Drug Testing Information:**
CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing.
**Pay Range Minimum:**
$81,765
**Pay Range Maximum:**
$134,909
**Additional Compensation:**
All bonuses at CDM Smith are discretionary and may or may not apply to this position.
**Work Location Options:**
Hybrid Work Options may be considered for successful candidate.
**Massachusetts Applicants:**
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

POSITION SUMMARY

Manage a small team of Engineers, consisting of Project, Manufacturing, Weld and Electrical Engineers to move projects from receipt of RFQ through shipment to the customer. Responsibilities include the development of the engineering plan, management of procedures, creation of standard work, management of resources to meet on time delivery while assuring compliance and maintaining cost targets per the content of the contract.

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES

• Lead and develop engineering team members.
• Provide coaching, mentoring, and performance evaluations.
• Coordinate training and development plans for technical staff.
• Manage engineering support for customer projects from RFQ through production handoff.
• Support cost estimation and quoting activities with technical input.
• Ensure design for manufacturability (DFM), cost-effectiveness.
• Oversee the development, optimization, and documentation of manufacturing processes.
• Coordinate resources and job assignments to ensure customer satisfaction and adherence to project schedules.
• Interface with customers to provide information on current projects.
• Collaborate with Quality Assurance, Supply Chain, Production, and Program Management to ensure timely and efficient project execution.
• Coordinate tooling, fixtures, and production line setup in collaboration with operations.
• Demonstrate ownership of engineering documentation, including BOMs, work instructions, process flows, and test protocols.
• Maintain working knowledge of new technologies to improve operations and engineering processes.
• Demonstrate accountability for creating a safe, professional and clean environment.
• Track and report on engineering KPIs (OTD, project milestones, Non-conformance RCCA).
• Provide regular updates for executive leadership and customer stakeholders.

General Responsibilities:

• Process Improvement: Work to reduce and eliminate barriers and obstacles to improve overall cost and scheduling performance.
• Leadership Skills: Your leadership is expected to make it easier for employees to make quality products and make it easier for customers to do business with GSM.
• Professional Conduct: Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors.
• Teamwork and Collaboration: Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and staff, collaborating with them to accomplish shared purposes and goals.
• Ethics and Compliance: Abides by GSM Code of Ethics and Business

Requirements

QUALIFICATIONS, SKILLS, AND ABILITIES

• Bachelor's Degree in related Engineering discipline or equivalent experience.
• 7+ years of engineering experience in a manufacturing environment, preferably in contract manufacturing.
• 3+ years in a leadership or management role with direct reports.
• Knowledge of manufacturing methods, military specifications, and documentation systems is required.
• Experience in project management responsibilities.
• Experience in defense related job fabrication and welding environment.
• Proficiency in Microsoft Office products.
• Strong understanding of manufacturing processes, CNC machining, Painting, Fabrication, NDT and Welding.
• Demonstrated proficiency in SolidWorks (modeling and drawings).
• Demonstrated proficiency in Root Cause and Corrective Action.
• Experience with New Product Introduction (NPI).
• Experience with ERP/MRP systems.
• Experience with inspections tools (Laser Tracker, CMM).
• Excellent human interaction skills.
• Ability to obtain security clearance.

AAP/EEO STATEMENT

Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment.

Benefits

Granite State Manufacturing offers a comprehensive benefits package to all GSM employees.

• Health & Wellness Programs
• Health Insurances (Medical, Dental, & Vision)
• Flexible Spending Accounts (FSA)
• Basic & Optional Life Insurance
• Short & Long Term Disability
• Employee Assistance Program
• Voluntary Worksite Benefits
• 401k Retirement Plan
• Paid Leave
• Tuition Reimbursement
• Workers Compensation

.and much more.

Job Overview

This Engineering Technician is responsible for assisting with the hands-on functional testing, repair, and processing of new products and returned from the field to maximize efficiency and minimize process cycle time. Position is 1st shift, 7:00am - 3:30pm, hybrid with remote days on Monday and Friday, working in the Portsmouth, NH office on Tuesday, Wednesday, Thursday.

A Day In The Life

Essential Functions:

• Repair or replace, reconfigure and/or test, and process Hubbell equipment.
• Train and support contract manufacturers on the test and hardware processes.
• Use Team Center, Sharepoint, and other applications to verify data, drawings, procedures/etc.
• Work with Manager MIMT in specifying and developing repair specific processes.
• Assist in meeting metric objectives associated with warranty and non-warranty repair.

Additional Responsibilities:

• Assist with company-wide continuous quality improvements by providing recommendations for enhancing related policies, procedures, methods, products, and documentation.
• Assist where necessary with Reliability and Failure Analysis testing.
• Perform other duties as assigned by the Management.

What will help you thrive in this role?

Required:

• Minimum of a Associates Degree in Electronics or Technical Certificate
• 2 or more years of equivalent Engineering Technician experience
• Knowledge of software development tools. i.e. .NET C# etc.
• Knowledge of databases like SQL.
• Microsoft tools, Excel, Word, PP
• Must be detail-oriented and have the ability to multitask
• IPC-A-610 Certification
• Trained to IPC-7711/7721 rework and repair standard
• Course work in computer science and Access data base systems or equivalent experience
• Must be willing and able to travel ~10% of the time

Preferred:

• IPC-A-610 Certification
• Trained to IPC-7711/7721 rework and repair standard

Responsibility of Equipment or Process:

• Use of soldering station
• Use of de-soldering for through-hole and surface mount components.
• Use of temperature chamber equipment
• Read and understand assembly drawing and schematics.

Physical Demands:

• Normal Office and Laboratory activities
• Occasional lifting of up to 30 pounds
• Frequent sitting
• Moderate walking
• Frequent standing

Hubbell Incorporated

Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently.

The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses.

We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe.

Hubbell Utility Solutions

Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible.

Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.

Engineering Technician

Apply now »

Date: Aug 17, 2025

Location: Lincoln, NH, US, 03251

Company: Hubbell Incorporated

Job Overview

The engineering technician will work alongside manufacturing engineers, maintenance personnel, toolmakers, and production personnel to implement engineering projects in the plant.

A Day In The Life

Primary Duties:

Support implementation of machinery replacement project.

• Develops hands-on competency in Burndy Littleton’s patented tooling system for progressive metal forming. Gains the ability to perform die set-ups and machine set-ups, and to perform process monitoring and machine tuning.

• Develops hands-on competency in a unique graphical user interface (GUI) timing chart to control servo-actuated Bihler NC machine.

• Reads and interprets production drawings to gain knowledge of critical product dimensions. Develops understanding of how product dimensions relate to process parameters and tooling dimensions, and assists engineers in new tooling fabrication and implementation.

• Works alongside manufacturing engineering and operators to troubleshoot problems that arise with the implementation of any of the above tasks.

Support tooling development initiatives.

• Continues the engineering initiative of cataloging and fully implementing tooling items into the engineering documentation library and SAP Plant Maintenance software.

• Assists manufacturing engineering and machine operators with complex tooling assembly component storage and organization, including 5S tasks.

• Orders perishable tooling from vendors. Receives tooling re-order request from operators, finds documentation for tooling, sends documentation to vendor for quote, receives quote, issues a thoroughly-filled-out requisition to the purchasing department.

Support CNC manufacturing.

• Write, modify, review and adjust CNC programs for connector part production on both CNC turret and swiss style lathes and vertical milling machines.

• Select appropriate tooling for various CNC production tasks.

• Work alongside manufacturing engineering to analyze, identify, design and implement improved manufacturing techniques and processes in CNC work cells.

Support automated manufacturing and assembly processes.

• Work alongside manufacturing engineering to identify and reduce production bottlenecks associated with automated production sequences.

• Provide PLC programming assistance to read, write and debug automated production issues.

• Work Alongside manufacturing engineering to analyze, identify, design and implement new and/or replacement automation components to improve automated production output.

Support process improvements associated with production machinery and documentation.

• Perform time studies to verify current production sequence documentation is accurate to the actual manufacturing processes.

• Work alongside manufacturing engineering to analyze, identify and implement replacement machinery to improve throughput of various production processes.

• Aid manufacturing engineering in defining requirements and guidelines for replacement equipment and processes from outside vendors.

• Work with machine operators and manufacturing engineering to provide continuous improvement support to optimize the production process.

Additional Duties:

• Support of Company Safety Initiatives including Lock-out/Tag-out/Clear & Try.

• Work with engineering team on development of new products.

• Performs all tasks in a manner that doesn’t impede production schedule.

What will help you thrive in this role?

To perform the job successfully, an individual should demonstrate the following competencies:

• Ability to read and understand production prints and tolerancing conventions.

• Excellent verbal communication skills. Good written communication skills.

• Ability to check computer throughout the day for emails and internal workflow notifications.

• Mechanical aptitude: must be able to work on and with machinery in a manner that is safe, systematic, and effective. Must be comfortable working safely with progressive die sets.

• Leadership: must be comfortable implementing changes in an environment where change is difficult.

• Ability to use Microsoft Excel for project tracking and documentation indexing.

• Must be familiar with creating CAD models and drawings; experience in Autodesk Inventor preferred.

• Ability to converse with toolmakers and skilled setup personnel to understand critical tooling information, and to convey this information using engineering drawing conventions.

• Must be able to take repeatable measurements with digital vernier calipers, micrometers, and gage blocks.

• Must take responsibility for project successes. Must have the persistence required to complete technical tasks. Must proactively continue to check for task completion if the task has been delegated to another party.

• Must have thick skin. Must react to potentially challenging situations in a way that diminishes or resolves conflict rather than amplifying it.

• Must have basic understanding of cold forming physics.

• Must be able to maintain a clean and organized workbench while simultaneously dealing with articles that do not fit into categories.

• Bonus Skills (valued but not required):

• Understanding of fits and tolerances (press fit, slip fit, etc.)

• Conversant knowledge of material compositions (D2, S7, 4140, etc.) and Rockwell Scale hardness for tooling applications.

• Understanding of GD&T.

• Ability to conduct bulk computations (macros) in Microsoft Excel.

• Ability to make insightful recommendations for process improvements, and to develop an implementation plan for these recommendations.

• Ability to perform basic electrical diagnosis with basic tools (test light, multimeter, etc.) and read electrical diagrams.

• Experience with machine fixture and jig design.

• General understanding of control systems and input/output logic as it relates to production machinery.

Hubbell Incorporated

Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently.

The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses.

We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe.

Hubbell Electrical Solutions

Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. HES provides the critical components that allow operators of buildings, factories and other industrial infrastructure to connect, protect, wire and manage power.

Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.

Engineering Technician

Apply now »

Date: Aug 3, 2025

Location: Portsmouth, NH, US, 03801

Company: Hubbell Incorporated

Job Overview

This Engineering Technician is responsible for assisting with the hands-on functional testing, repair, and processing of new products and returned from the field to maximize efficiency and minimize process cycle time. Position is 1st shift, 7:00am - 3:30pm, hybrid with remote days on Monday and Friday, working in the Portsmouth, NH office on Tuesday, Wednesday, Thursday.

A Day In The Life

Essential Functions:

• Repair or replace, reconfigure and/or test, and process Hubbell equipment.

• Train and support contract manufacturers on the test and hardware processes.

• Use Team Center, Sharepoint, and other applications to verify data, drawings, procedures/etc.

• Work with Manager MIMT in specifying and developing repair specific processes.

• Assist in meeting metric objectives associated with warranty and non-warranty repair.

Additional Responsibilities:

• Assist with company-wide continuous quality improvements by providing recommendations for enhancing related policies, procedures, methods, products, and documentation.

• Assist where necessary with Reliability and Failure Analysis testing.

• Perform other duties as assigned by the Management.

What will help you thrive in this role?

Required:

• Minimum of a Associates Degree in Electronics or Technical Certificate

• 2 or more years of equivalent Engineering Technician experience

• Knowledge of software development tools. i.e. .NET C# etc.

• Knowledge of databases like SQL.

• Microsoft tools, Excel, Word, PP

• Must be detail-oriented and have the ability to multitask

• IPC-A-610 Certification

• Trained to IPC-7711/7721 rework and repair standard

• Course work in computer science and Access data base systems or equivalent experience

• Must be willing and able to travel ~10% of the time

Preferred:

• IPC-A-610 Certification

• Trained to IPC-7711/7721 rework and repair standard

Responsibility of Equipment or Process:

• Use of soldering station

• Use of de-soldering for through-hole and surface mount components.

• Use of temperature chamber equipment

• Read and understand assembly drawing and schematics.

Physical Demands:

• Normal Office and Laboratory activities

• Occasional lifting of up to 30 pounds

• Frequent sitting

• Moderate walking

• Frequent standing

Hubbell Incorporated

Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently.

The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses.

We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe.

Hubbell Utility Solutions

Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible.

Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.