420 Freelance Settings jobs in the United States

Exciting opportunity available: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196.

Are you ready to be a part of a global team dedicated to building a sustainable future? Join Cargill, where over 160,000 employees work together to provide safe and high-quality food products to diverse customers, including foodservice operators, grocery stores, and manufacturers. This position is within Cargill's protein and salt division.

Job Location: North Kingstown, Rhode Island

Job Type: Full Time

Shift(s) Available: 1st

Compensation: $42.30/hr

Benefits Information:

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts

Principal Accountabilities:

• Perform preventative, predictive, and reactive industrial electrical work across the facility.
• Document completed work and conditions found using maintenance software.
• Install, maintain, test, evaluate, and repair various electrical systems, including medium voltage automation and motor control circuits.
• Read and interpret mechanical/electrical schematics, blueprints, and operation manuals.
• Operate forklifts and/or scissor lifts as needed.
• Adhere to all safety rules and regulations.
• Maintain a clean and safe work environment.
• Be prepared for exposure to various environmental conditions and lifting up to 50 lbs.
• Other duties as assigned.

Required Qualifications:

• Must have the legal right to work in the US.
• Must be 18 years or older.
• Must possess a valid and active Rhode Island Electrical B or M license.
• Strong communication skills in English (both verbal and written).
• Ability to perform physical duties such as bending, lifting, kneeling, climbing, and twisting safely.
• Willing to work in various indoor and outdoor conditions, including heat, cold, and noise.
• Must be able to work at elevated levels (4 feet and above).
• Willingness to work overtime, weekends, and holidays as needed.
• Basic computer skills.
• Some experience troubleshooting and maintaining electrical systems, particularly medium voltage and motor control circuits.

Preferred Qualifications:

• Experience with SAP or a Computerized Maintenance Management System (CMMS).
• Technical diploma or certification from a trade school, or at least two years of relevant experience.
• Advanced troubleshooting and maintenance skills for electrical systems.
• Familiarity with programming software such as Rockwell or Siemens.
• Experience in the food industry with technology such as scales and metal detectors.
• Proficient in creating and troubleshooting wiring layouts and circuit routing.
• Knowledgeable about Variable Frequency Drives (VFD) and PLC programming.

Please note that this position does not include relocation reimbursement.

Cargill is an Equal Opportunity Employer, including Disability/Vet.

Exciting opportunity available: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196.

Are you ready to be a part of a global team dedicated to building a sustainable future? Join Cargill, where over 160,000 employees work together to provide safe and high-quality food products to diverse customers, including foodservice operators, grocery stores, and manufacturers. This position is within Cargill's protein and salt division.

Job Location: North Kingstown, Rhode Island

Job Type: Full Time

Shift(s) Available: 1st

Compensation: $42.30/hr

Benefits Information:

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts

Principal Accountabilities:

• Perform preventative, predictive, and reactive industrial electrical work across the facility.
• Document completed work and conditions found using maintenance software.
• Install, maintain, test, evaluate, and repair various electrical systems, including medium voltage automation and motor control circuits.
• Read and interpret mechanical/electrical schematics, blueprints, and operation manuals.
• Operate forklifts and/or scissor lifts as needed.
• Adhere to all safety rules and regulations.
• Maintain a clean and safe work environment.
• Be prepared for exposure to various environmental conditions and lifting up to 50 lbs.
• Other duties as assigned.

Required Qualifications:

• Must have the legal right to work in the US.
• Must be 18 years or older.
• Must possess a valid and active Rhode Island Electrical B or M license.
• Strong communication skills in English (both verbal and written).
• Ability to perform physical duties such as bending, lifting, kneeling, climbing, and twisting safely.
• Willing to work in various indoor and outdoor conditions, including heat, cold, and noise.
• Must be able to work at elevated levels (4 feet and above).
• Willingness to work overtime, weekends, and holidays as needed.
• Basic computer skills.
• Some experience troubleshooting and maintaining electrical systems, particularly medium voltage and motor control circuits.

Preferred Qualifications:

• Experience with SAP or a Computerized Maintenance Management System (CMMS).
• Technical diploma or certification from a trade school, or at least two years of relevant experience.
• Advanced troubleshooting and maintenance skills for electrical systems.
• Familiarity with programming software such as Rockwell or Siemens.
• Experience in the food industry with technology such as scales and metal detectors.
• Proficient in creating and troubleshooting wiring layouts and circuit routing.
• Knowledgeable about Variable Frequency Drives (VFD) and PLC programming.

Please note that this position does not include relocation reimbursement.

Cargill is an Equal Opportunity Employer, including Disability/Vet.

Exciting opportunity available: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196.

Are you ready to be a part of a global team dedicated to building a sustainable future? Join Cargill, where over 160,000 employees work together to provide safe and high-quality food products to diverse customers, including foodservice operators, grocery stores, and manufacturers. This position is within Cargill's protein and salt division.

Job Location: North Kingstown, Rhode Island

Job Type: Full Time

Shift(s) Available: 1st

Compensation: $42.30/hr

Benefits Information:

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts

Principal Accountabilities:

• Perform preventative, predictive, and reactive industrial electrical work across the facility.
• Document completed work and conditions found using maintenance software.
• Install, maintain, test, evaluate, and repair various electrical systems, including medium voltage automation and motor control circuits.
• Read and interpret mechanical/electrical schematics, blueprints, and operation manuals.
• Operate forklifts and/or scissor lifts as needed.
• Adhere to all safety rules and regulations.
• Maintain a clean and safe work environment.
• Be prepared for exposure to various environmental conditions and lifting up to 50 lbs.
• Other duties as assigned.

Required Qualifications:

• Must have the legal right to work in the US.
• Must be 18 years or older.
• Must possess a valid and active Rhode Island Electrical B or M license.
• Strong communication skills in English (both verbal and written).
• Ability to perform physical duties such as bending, lifting, kneeling, climbing, and twisting safely.
• Willing to work in various indoor and outdoor conditions, including heat, cold, and noise.
• Must be able to work at elevated levels (4 feet and above).
• Willingness to work overtime, weekends, and holidays as needed.
• Basic computer skills.
• Some experience troubleshooting and maintaining electrical systems, particularly medium voltage and motor control circuits.

Preferred Qualifications:

• Experience with SAP or a Computerized Maintenance Management System (CMMS).
• Technical diploma or certification from a trade school, or at least two years of relevant experience.
• Advanced troubleshooting and maintenance skills for electrical systems.
• Familiarity with programming software such as Rockwell or Siemens.
• Experience in the food industry with technology such as scales and metal detectors.
• Proficient in creating and troubleshooting wiring layouts and circuit routing.
• Knowledgeable about Variable Frequency Drives (VFD) and PLC programming.

Please note that this position does not include relocation reimbursement.

Cargill is an Equal Opportunity Employer, including Disability/Vet.

Exciting opportunity available: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196.

Are you ready to be a part of a global team dedicated to building a sustainable future? Join Cargill, where over 160,000 employees work together to provide safe and high-quality food products to diverse customers, including foodservice operators, grocery stores, and manufacturers. This position is within Cargill's protein and salt division.

Job Location: North Kingstown, Rhode Island

Job Type: Full Time

Shift(s) Available: 1st

Compensation: $42.30/hr

Benefits Information:

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts

Principal Accountabilities:

• Perform preventative, predictive, and reactive industrial electrical work across the facility.
• Document completed work and conditions found using maintenance software.
• Install, maintain, test, evaluate, and repair various electrical systems, including medium voltage automation and motor control circuits.
• Read and interpret mechanical/electrical schematics, blueprints, and operation manuals.
• Operate forklifts and/or scissor lifts as needed.
• Adhere to all safety rules and regulations.
• Maintain a clean and safe work environment.
• Be prepared for exposure to various environmental conditions and lifting up to 50 lbs.
• Other duties as assigned.

Required Qualifications:

• Must have the legal right to work in the US.
• Must be 18 years or older.
• Must possess a valid and active Rhode Island Electrical B or M license.
• Strong communication skills in English (both verbal and written).
• Ability to perform physical duties such as bending, lifting, kneeling, climbing, and twisting safely.
• Willing to work in various indoor and outdoor conditions, including heat, cold, and noise.
• Must be able to work at elevated levels (4 feet and above).
• Willingness to work overtime, weekends, and holidays as needed.
• Basic computer skills.
• Some experience troubleshooting and maintaining electrical systems, particularly medium voltage and motor control circuits.

Preferred Qualifications:

• Experience with SAP or a Computerized Maintenance Management System (CMMS).
• Technical diploma or certification from a trade school, or at least two years of relevant experience.
• Advanced troubleshooting and maintenance skills for electrical systems.
• Familiarity with programming software such as Rockwell or Siemens.
• Experience in the food industry with technology such as scales and metal detectors.
• Proficient in creating and troubleshooting wiring layouts and circuit routing.
• Knowledgeable about Variable Frequency Drives (VFD) and PLC programming.

Please note that this position does not include relocation reimbursement.

Cargill is an Equal Opportunity Employer, including Disability/Vet.

Exciting opportunity available: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196.

Are you ready to be a part of a global team dedicated to building a sustainable future? Join Cargill, where over 160,000 employees work together to provide safe and high-quality food products to diverse customers, including foodservice operators, grocery stores, and manufacturers. This position is within Cargill's protein and salt division.

Job Location: North Kingstown, Rhode Island

Job Type: Full Time

Shift(s) Available: 1st

Compensation: $42.30/hr

Benefits Information:

• Medical, Dental, Vision, and Prescription Drug Insurance
• Health and Wellness Incentives
• Paid Vacation and Holidays
• 401(k) with Cargill matching contributions
• Flexible Spending Accounts (FSAs)
• Short-Term Disability and Life Insurance
• Employee Assistance Program (EAP)
• Tuition Reimbursement
• Employee Discounts

Principal Accountabilities:

• Perform preventative, predictive, and reactive industrial electrical work across the facility.
• Document completed work and conditions found using maintenance software.
• Install, maintain, test, evaluate, and repair various electrical systems, including medium voltage automation and motor control circuits.
• Read and interpret mechanical/electrical schematics, blueprints, and operation manuals.
• Operate forklifts and/or scissor lifts as needed.
• Adhere to all safety rules and regulations.
• Maintain a clean and safe work environment.
• Be prepared for exposure to various environmental conditions and lifting up to 50 lbs.
• Other duties as assigned.

Required Qualifications:

• Must have the legal right to work in the US.
• Must be 18 years or older.
• Must possess a valid and active Rhode Island Electrical B or M license.
• Strong communication skills in English (both verbal and written).
• Ability to perform physical duties such as bending, lifting, kneeling, climbing, and twisting safely.
• Willing to work in various indoor and outdoor conditions, including heat, cold, and noise.
• Must be able to work at elevated levels (4 feet and above).
• Willingness to work overtime, weekends, and holidays as needed.
• Basic computer skills.
• Some experience troubleshooting and maintaining electrical systems, particularly medium voltage and motor control circuits.

Preferred Qualifications:

• Experience with SAP or a Computerized Maintenance Management System (CMMS).
• Technical diploma or certification from a trade school, or at least two years of relevant experience.
• Advanced troubleshooting and maintenance skills for electrical systems.
• Familiarity with programming software such as Rockwell or Siemens.
• Experience in the food industry with technology such as scales and metal detectors.
• Proficient in creating and troubleshooting wiring layouts and circuit routing.
• Knowledgeable about Variable Frequency Drives (VFD) and PLC programming.

Please note that this position does not include relocation reimbursement.

Cargill is an Equal Opportunity Employer, including Disability/Vet.

**Description**
**_Looking for an opportunity to make an impact?_**
**At Leidos** , we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer's success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.
**If this sounds like the kind of environment where you can thrive, keep reading!**
We are in search of a **Senior Relay Settings Engineer** to join our diverse and fast-paced Framingham, MA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing utility substation and renewable energy projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.
**REMOTE SUPPORT CAPABAILITES:** - Candidates are able to support remotely but must be able to relocate to or currently live within the United States.
**_Begin your journey of a flourishing and meaningful career; share your resume with us today!_**
**Successful candidates can look forward to a fast paced, diverse work environment & flexible work hours/work arrangements as well as managers who will encourage career development and growth including:**
+ Professional Engineer License (PE)
+ Project Management Professional (PMP)
+ Technical & non-technical training opportunities
+ Mentorship Program
**In this role, you can also expect to gain:**
+ NERC PRC compliance expertise
+ Electrical Power Calculations and standard development
+ Interactions with other disciplines (Substation, Protection & Controls, and Civil Structural)
+ Time management and organizational skills
**In this role, the qualified individual will be expected to:**
+ Solving challenging substation engineering problems.
+ Working with protection engineers and performing quality reviews on relay setting packages.
+ Create logic diagrams for IEC61850 substations.
+ Working directly with clients as well as working with other staff in remote office locations.
+ Assignments will cover the full range of project planning through design and construction support.
+ Preparation of relay settings from 4.16kV through 500kV including relay set points, logic diagrams, configuration files and documentation.
**What you will bring to the table:**
+ **Mid- Level:** Bachelors of Science in Electrical Engineering (BSEE) two (2+) years of related experience.
+ **Senior Level:** Bachelors of Science in Electrical Engineering (BSEE) four (4+) years of related experience.
+ Main requirement is experience with creating relay settings and logic diagrams.
+ Capable of using Aspen OneLiner and/or Siemen's CAPE for coordination studies and fault study analysis.
+ Preparation of protective relay coordination studies
+ Experience with development of relay settings for microprocessor relays including: SEL, Alstom, GE, ABB and others. For both transmission line relays (Line Differential, Step Distance and Pilot Schemes) and substation relays (Capacitors, Transformers and buses)
+ Being familiar with Schweitzer AcSELerator QuickSet, General Electric EnerVista and Schneider Electric MiCOM software is a plus.
+ Strong engineering and interpersonal skills and high attention to detail with a passion for quality.
+ Experience implementing control and protection schemes including interpreting schematics and wiring diagrams and preparing relay logic to complete the schemes.
+ Ability to meet deadlines under pressure situations.
+ Team player who can work effectively in team environment.
+ Self-starter who will work independently with minimal direction.
+ Strong written and verbal communication skills required when interfacing with clients and staff.
+ High level of computer competency
+ The following are additional skills that are considered a plus:
+ Experience preparing technical reports.
+ Familiarity with PTC MathCAD software
+ Previous Quality Assurance/Quality Control experience
+ Periodic travel may be required.
PDSSUBSTATION
PowerDelivery
**Original Posting:**
June 25, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
**Pay Range:**
Pay Range $85,150.00 - $153,925.00
The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
#Remote
REQNUMBER: R-
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.

**Description**
**_Looking for an opportunity to make an impact?_**
**At Leidos** , we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer's success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.
**If this sounds like the kind of environment where you can thrive, keep reading!**
We are in search of a **Senior Relay Settings Engineer** to join our diverse and fast-paced Framingham, MA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing utility substation and renewable energy projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.
**REMOTE SUPPORT CAPABAILITES:** - Candidates are able to support remotely but must be able to relocate to or currently live within the United States.
**_Begin your journey of a flourishing and meaningful career; share your resume with us today!_**
**Successful candidates can look forward to a fast paced, diverse work environment & flexible work hours/work arrangements as well as managers who will encourage career development and growth including:**
+ Professional Engineer License (PE)
+ Project Management Professional (PMP)
+ Technical & non-technical training opportunities
+ Mentorship Program
**In this role, you can also expect to gain:**
+ NERC PRC compliance expertise
+ Electrical Power Calculations and standard development
+ Interactions with other disciplines (Substation, Protection & Controls, and Civil Structural)
+ Time management and organizational skills
**In this role, the qualified individual will be expected to:**
+ Solving challenging substation engineering problems.
+ Working with protection engineers and performing quality reviews on relay setting packages.
+ Create logic diagrams for IEC61850 substations.
+ Working directly with clients as well as working with other staff in remote office locations.
+ Assignments will cover the full range of project planning through design and construction support.
+ Preparation of relay settings from 4.16kV through 500kV including relay set points, logic diagrams, configuration files and documentation.
**What you will bring to the table:**
+ **Mid- Level:** Bachelors of Science in Electrical Engineering (BSEE) two (2+) years of related experience.
+ **Senior Level:** Bachelors of Science in Electrical Engineering (BSEE) four (4+) years of related experience.
+ Main requirement is experience with creating relay settings and logic diagrams.
+ Capable of using Aspen OneLiner and/or Siemen's CAPE for coordination studies and fault study analysis.
+ Preparation of protective relay coordination studies
+ Experience with development of relay settings for microprocessor relays including: SEL, Alstom, GE, ABB and others. For both transmission line relays (Line Differential, Step Distance and Pilot Schemes) and substation relays (Capacitors, Transformers and buses)
+ Being familiar with Schweitzer AcSELerator QuickSet, General Electric EnerVista and Schneider Electric MiCOM software is a plus.
+ Strong engineering and interpersonal skills and high attention to detail with a passion for quality.
+ Experience implementing control and protection schemes including interpreting schematics and wiring diagrams and preparing relay logic to complete the schemes.
+ Ability to meet deadlines under pressure situations.
+ Team player who can work effectively in team environment.
+ Self-starter who will work independently with minimal direction.
+ Strong written and verbal communication skills required when interfacing with clients and staff.
+ High level of computer competency
+ The following are additional skills that are considered a plus:
+ Experience preparing technical reports.
+ Familiarity with PTC MathCAD software
+ Previous Quality Assurance/Quality Control experience
+ Periodic travel may be required.
PDSSUBSTATION
PowerDelivery
**Original Posting:**
June 25, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
**Pay Range:**
Pay Range $85,150.00 - $153,925.00
The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
#Remote
REQNUMBER: R- -OTHLOC-6314
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.

**Description**
**_Looking for an opportunity to make an impact?_**
**At Leidos** , we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer's success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.
**If this sounds like the kind of environment where you can thrive, keep reading!**
We are in search of a **Relay Settings Engineering Manager** to join our diverse and fast-paced Framingham, MA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing utility substation and renewable energy projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.
**In this role, you can also expect to gain:**
+ Leadership skills to be on path to become an Engineering director.
+ NERC PRC compliance expertise, Electrical Power Calculations and standard development
+ Interactions with other disciplines (Substation, Protection & Controls, and Civil Structural)
+ Time management and organizational skills
+ Interaction with clients leading to interpersonal skills
**In this role, the qualified individual will be expected to:**
+ Lead team of 8+ engineers to develop relay settings from 4.16kV through 500kV including relay set points, logic diagrams, configuration files and documentation.
+ Possessing experience in **managing and leading a team of engineers** .
+ Review work provided by Client and assess requirements of scopes.
+ Showcasing expertise in dealing with customers and outside vendors, while collaborating effectively with field engineers.
+ Comply with Leidos and Client Safety requirements as well as design and quality expectations.
+ Solving challenging substation engineering problems for entire project cycle
+ Clearly communicate design and engineering requirements to both internal teams and external vendors on behalf of clients.
+ Working with protection engineers and performing quality reviews on relay setting packages.
+ Create logic diagrams for IEC61850 substations.
+ Working directly with clients as well as working with other staff in remote office locations.
+ Assignments will cover the full range of project planning through design and construction support.
**What you will bring to the table:**
+ Bachelors of Science in Electrical Engineering (BSEE) ten (10+) years of related experience.
+ Possessing experience in managing and leading a team of engineers.
+ Experience with creating relay settings, settings calculation templates and logic diagrams highly preferred.
+ Experience working with EPC clients is preferred.
+ Capable of using either Aspen OneLiner, ETAP, Power Tools SKM and/or Siemen's CAPE for coordination studies and fault study analysis.
+ Preparation of protective relay coordination studies
+ Experience with development of relay settings for microprocessor relays including: SEL, Alstom, GE, ABB and others. For both transmission line relays (Line Differential, Step Distance and Pilot Schemes) and substation relays (Capacitors, Transformers and buses)
+ Being familiar with Schweitzer AcSELerator QuickSet, General Electric EnerVista and Schneider Electric MiCOM software is a plus.
+ Strong engineering and interpersonal skills and high attention to detail with a passion for quality.
+ Experience creating & implementing protection and control schemes including interpreting schematics and wiring diagrams and implement relay logic.
+ Ability to meet deadlines under pressure situations.
+ Team player who can work effectively in team environment.
+ Self-starter who will work independently with minimal direction.
+ Strong written and verbal communication skills required when interfacing with clients and staff.
+ High level of computer competency
**You May Also Have:**
+ Experience preparing technical reports.
+ Demonstrating expertise in **proposal development** .
+ Familiarity with PTC MathCAD software
+ Previous Quality Assurance/Quality Control experience
+ Periodic travel may be required. About 15%.
+ Relay testing and troubleshooting experience.
+ Previous Power Consulting or Power utility business experience
PDSSUBSTATION
PowerDelivery
**Original Posting:**
June 4, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
**Pay Range:**
Pay Range $104,650.00 - $189,175.00
The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
#Featuredjob
REQNUMBER: R-
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.

**Description**
**_Looking for an opportunity to make an impact?_**
**At Leidos** , we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer's success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.
**If this sounds like the kind of environment where you can thrive, keep reading!**
We are in search of a **Relay Settings Engineering Manager** to join our diverse and fast-paced Framingham, MA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing utility substation and renewable energy projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.
**In this role, you can also expect to gain:**
+ Leadership skills to be on path to become an Engineering director.
+ NERC PRC compliance expertise, Electrical Power Calculations and standard development
+ Interactions with other disciplines (Substation, Protection & Controls, and Civil Structural)
+ Time management and organizational skills
+ Interaction with clients leading to interpersonal skills
**In this role, the qualified individual will be expected to:**
+ Lead team of 8+ engineers to develop relay settings from 4.16kV through 500kV including relay set points, logic diagrams, configuration files and documentation.
+ Possessing experience in **managing and leading a team of engineers** .
+ Review work provided by Client and assess requirements of scopes.
+ Showcasing expertise in dealing with customers and outside vendors, while collaborating effectively with field engineers.
+ Comply with Leidos and Client Safety requirements as well as design and quality expectations.
+ Solving challenging substation engineering problems for entire project cycle
+ Clearly communicate design and engineering requirements to both internal teams and external vendors on behalf of clients.
+ Working with protection engineers and performing quality reviews on relay setting packages.
+ Create logic diagrams for IEC61850 substations.
+ Working directly with clients as well as working with other staff in remote office locations.
+ Assignments will cover the full range of project planning through design and construction support.
**What you will bring to the table:**
+ Bachelors of Science in Electrical Engineering (BSEE) ten (10+) years of related experience.
+ Possessing experience in managing and leading a team of engineers.
+ Experience with creating relay settings, settings calculation templates and logic diagrams highly preferred.
+ Experience working with EPC clients is preferred.
+ Capable of using either Aspen OneLiner, ETAP, Power Tools SKM and/or Siemen's CAPE for coordination studies and fault study analysis.
+ Preparation of protective relay coordination studies
+ Experience with development of relay settings for microprocessor relays including: SEL, Alstom, GE, ABB and others. For both transmission line relays (Line Differential, Step Distance and Pilot Schemes) and substation relays (Capacitors, Transformers and buses)
+ Being familiar with Schweitzer AcSELerator QuickSet, General Electric EnerVista and Schneider Electric MiCOM software is a plus.
+ Strong engineering and interpersonal skills and high attention to detail with a passion for quality.
+ Experience creating & implementing protection and control schemes including interpreting schematics and wiring diagrams and implement relay logic.
+ Ability to meet deadlines under pressure situations.
+ Team player who can work effectively in team environment.
+ Self-starter who will work independently with minimal direction.
+ Strong written and verbal communication skills required when interfacing with clients and staff.
+ High level of computer competency
**You May Also Have:**
+ Experience preparing technical reports.
+ Demonstrating expertise in **proposal development** .
+ Familiarity with PTC MathCAD software
+ Previous Quality Assurance/Quality Control experience
+ Periodic travel may be required. About 15%.
+ Relay testing and troubleshooting experience.
+ Previous Power Consulting or Power utility business experience
PDSSUBSTATION
PowerDelivery
**Original Posting:**
June 4, 2025
For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
**Pay Range:**
Pay Range $104,650.00 - $189,175.00
The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
#Featuredjob
REQNUMBER: R- -OTHLOC-PL-2D0475
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.