171 Industrial jobs in Cloverleaf

Location: Houston, TX 77049

Pay: $28.80-$31.50

Start: ASAP

Seeking an experienced Industrial Electrician with 3-phase, 480V, and industrial troubleshooting experience to assemble, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand, power, and precision measuring tools. The electrician diagnoses malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem and maintain production machinery throughout the plant which consists of heat treatment operations, hydrotester, threading equipment and controls. The electrician is responsible for the connection of wires to circuit breakers, transformers, or other components. Responsible for observing and following all safety regulations with required PPE.

• Ability to assemble, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures
• Maintain electrical equipment to meet regulatory codes at the country, state and federal levels
• Perform rigging activities, safety-related functions and other miscellaneous electrical functions
• Demonstrate safe and proficient use of shop tools (both hand and power)
• Demonstrate mechanical knowledge
• Competent with programming of VFD's
• Must possess demonstrated ability to safely utilize a forklift and high lift
• Knowledge and ability to troubleshoot PLC's
• Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment and fixtures
• Proficient in testing and troubleshooting electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and megohmmeters, to ensure compatibility and safety of system
• Perform installation and maintenance work as part of a team of skilled trade workers
• Perform duties in a work environment that will be hot, cold, dirty and fast-paced
• Self-starter yet able to take orders as directed

• Basic Electricity & Electronics
• DC Equipment & Controls
• Batteries & DC Circuits
• Single-Phase Motors
• Transformers & AC Circuits
• Three-Phase Systems
• Electrical Measuring Instruments
• AC Control Equipment
• Electrical Safety & Protection
• Electrical Troubleshooting
• Power Supplies
• Digital Logic Systems
• Input/Output Devices
• Ability to read Electrical Schematics and mechanical blueprints
• Ladder logic knowledge
• Variable Frequency Drives
• Programmable Logic Controllers

• Preferred electrician license or two-year electrical program
• Candidates will be required to pass a background check and drug screen.

Must be available to work 12-hour day and night shifts, weekends, call-outs and overtime.

Do you love hands-on work, and working as part of a team? At ISCO, we provide an opportunity to really make a difference. With a high value of appreciation and respect, ISCO strongly focuses on our team members growth and development.

Pay Range: $20+ /hour (Depending on Experience)

ISCO is a family-owned and operated end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader. We are looking for great people with a strong work ethic who love to work with their hands.

Alongside competitive pay, ISCO offers a benefits package including; medical/dental/vision, paid vacation, holidays, sick days, and a 401k! Team members are provided all tools/equipment and PPE.

Responsibilities:

Our Mechanics are responsible for repairing and refurbishing fusion equipment in a distribution plant by performing the following duties:

• Diagnose, maintain and repair fusion equipment including; small diesel/gas engines, generators, electrical circuits and hydraulic systems
• Perform quality inspections of rental fusion equipment prior to returning to service
• Maintain records of service, repairs and scheduled maintenance of rental fusion equipment
• Inspect and diagnose customer owned equipment to prepare repair quotes
• Communicate with maintenance coordinator and service advisors on status of down equipment and customer repairs
• Report machine defects, damages and malfunctions
• Repair and Service fabrication shop equipment as needed
• Prepare equipment for shipping
• Previous experience with computers for order entry, parts ordering and email is a plus
• Ability to utilize local vendors and/or vendor websites to locate required parts as needed
• Perform other related duties as assigned

Base Qualifications:

• 3+ years of experience in maintenance or automotive repair preferred
• Diagnostic ability and Troubleshooting skills
• Commitment to quality
• Ability to meet deadlines, work flexible hours, and work in a team environment
• Interpret technical instructions
• Capability to use independent judgment and work both independently and, in a team setting.
• Basic computer skills
• Physical demands: must be able to lift up to 50lbs on a regular basis, standing, climbing is frequently required.

Screening requirements include: A Physical, Drug Screen, and Criminal Background Check.

About Us: EMR isone ofthe world’s leading metal recycling companieswith a history spanning decades.At EMR, our employees are the heart and soul of our organization. We are committed to creating a workplace that prioritizes the well-being and safety of everyone. Our company provides a supportive and inclusive community where everyone's ideas and contributions are valued.We believe in teamwork and collaboration. Our mission is to provide our customers with efficient and reliable metal recycling services while minimizing the environmental impact of our operations. EMR recycles ten million tons of material annually, everything from beverage cans to aircraft carriers. We work with a wide variety of metals including copper, aluminum, brass, and stainless steel and can recycle it into more than 200 different types of new sustainable raw materials. EMR offers our team a competitive salary and a comprehensive benefits package, including health insurance, retirement planswith company match, wellbeing benefits, employee assistance program and more. Join us and be a part of a team that puts people first! Are you a savvy negotiator with an eye for value and a passion for building strong supplier relationships? We’re looking for an Industrial Buyer to join our growing team and help drive revenue through strategic sourcing and purchasing of scrap metal and other industrial materials. In this role, you’ll be on the front lines - evaluating materials, negotiating deals, and managing supplier relationships, all while helping us grow our book of business. If you have a background in industrial buying, sales, or scrap metal procurement and thrive in a fast-paced, hands-on environment, we want to hear from you! What We Offer: Competitive salary and performance-based bonuses Comprehensive health, dental, and vision insurance plans Retirement savings plan with employer matching Paid time off, including vacation, holidays, parental leave, and sick leave Opportunities for career advancement and professional development A supportive work environment committed to sustainability and environmental responsibility What You’ll Do: Source and purchase scrap metal and industrial materials at competitive rates Negotiate pricing and terms using industry insights and market trends Build and maintain strong relationships with suppliers and clients Identify new opportunities within existing accounts and generate new leads Evaluate materials for quality and value in the field Prepare quotes, respond to inquiries, and follow up with potential and current suppliers Write purchase tickets, assist with weighing materials, and process transactions Stay up to date on competitor activity and market changes Collaborate with other departments and support team-wide goals What You Bring: 1–4+ years of experience in sales, industrial buying, scrap metal, manufacturing, or a related field Excellent communication, negotiation, and relationship-building skills Hands-on mindset with the ability to assess material quality and grade Comfortable working in both office and outdoor yard settings Familiarity with CRM systems and inventory tools is a plus Self-motivated and able to juggle multiple tasks with minimal supervision Knowledge of metals, commodities, or recycling industries (preferred) Education: High school diploma or GED required Bachelor’s degree is a plus, but not required #LI-Onsite EMR USA Metal Recycling provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.*E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve lawful workforce.

Req ID: 229812

Job Location: 4800 Houston, TX (NorthPoint)
Work days/Shift Hours - if applicable: 4:00 AM - 4:30 PM / 2-2-3 Flex Schedule.

Compensation: Starting pay ranges from $27.41 to $33.50 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits.

Additional Relevant Information:

General Purpose

Responsible for troubleshooting and providing immediate preventative and corrective maintenance support to production lines and facilitating change-over

Duties and Responsibilities

• Troubleshoot equipment problems and perform immediate repairs and preventative maintenance on equipment.
• Overhaul and install new equipment.
• Rebuild and fabricate parts.
• Perform facility maintenance and maintain clean and safe work area.
• Generate parts request to ensure adequate inventory.
• Generate and complete work orders as assigned.
• Perform equipment change-overs and production line set ups.

• High School diploma or equivalent preferred.
• 0-5 years of industrial maintenance experience required.
• 1+ years of mechanical/electrical experience preferred.
• Prior diagnostic/troubleshooting and preventative maintenance experience preferred.
• Previous experience within high-speed industrial environment.
• Demonstrated mechanical and technical aptitude.
• Basic computer skills.
• Ability to follow manufacturers specifications and schematics.
• Programmable Logic Control (PLC) knowledge preferred.
• May be required to supply hand tools.

Job Description

Job Title: Industrial Helper

Immediate Supervisor: Site Superintendent

Responsibilities:

• Work under the direction of qualified industrial craftsman (lead)
• Provide labor support to industrial craftsman (lead)
• Knowledgeable in basic mechanical power tools
• Assist in cleaning work areas and equipment.
• Work to gain full understanding of mechanical and general labor procedures.
• Promote and exhibit safe work practices

Requirements:

• Minimum 6 months of field experience in support of industrial helper
• Must possess eagerness and willingness to learn, and receive instruction/direction from qualified industrial craftsman
• Must maintain high standard of safety, integrity and professionalism
• Ability to communicate and comprehend effectively
• Must meet all physical requirements
• Must successfully pass background, drug/alcohol testing
• Ability to adhere to large amounts of standing, walking, bending, squatting and lifting
• Ability to lift, carry, and move up to 49lbs
• Ability to work at heights in excess of 50feet
• Ability to push, pull, turn, hold, grab: objects, materials, controls, and tools
• Ability to climb ladders and stairways, work from man lifts
• Ability to work out on an open structure / platform using the appropriate fall protection requirements
• Required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glass/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves, and leather steel toe work boots

Physical Requirements:

• Ability to adhere to large amounts of standing, walking, bending, squatting and lifting
• Ability to lift, carry, and move up to 49lbs
• Ability to work at heights in excess of 50feet
• Ability to push, pull, turn, hold, grab: objects, materials, controls, and tools
• Ability to climb ladders and stairways, work from man lifts
• Ability to work out on an open structure / platform using the appropriate fall protection requirements
• Required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glass/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves, and leather steel toe work boots

Texas Compression is a Houston-based mechanical and Industrial services contractor servicing customer across Texas, Louisiana and Oklahoma. We are currently looking for experienced skilled laborers for upcoming projects located in Harris, Galveston, Fort Bend and Brazoria Counties. Job duties inclu.

W-Industries is an energy service company that specializes in Automation Solutions, I&E Construction Services, Power Generation and Packaged Equipment for the Energy and Industrial markets. Our expertise encompasses the full spectrum of system technologies from pneumatic - hydraulic control systems to state-of-the-art programmable solutions to chemical injection systems, and everything in-between.

W-Industries is looking to hire an industrial electrician with 5+ years of offshore experience. Position involves bending conduit, pulling cable, installing controls and working on electrical systems.

Requirements

• Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threading machine, rules and conduit benders.
• Installing, modifying and fabricating cable tray accordingly to drawings & P&ID's.
• Read and understand P&ID's (symbols, tags and instrument lines), wiring diagrams and instrument loop drawings.
• Pulls wiring through wiring raceway, assisted by helper.
• Load, transport and unload tools, equipment and supplies.
• Connects power cables to equipment and installs grounding leads.
• Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope.
• Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement.
• Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with screws or bolts using hand or power tools.
• Assist in lifting, positioning and securing of material and work pieces during installation.
• Work on electrical systems ranging from 12vcd to 480 vac; electrical meters and diagnostics tools for troubleshooting electrical systems.
• Perform minor maintenance of cleaning activities of tools and equipment.
• Follow all company safety procedures including lockout/tag out procedures.
• Perform other duties as required.

• Must have 5+ years of Electrical experience working offshore.
• Read and understand P&ID's (symbols, tags and instrument lines), wiring diagrams and instrument loop drawings.
• Understand how to read and translate the information found within all schematic wiring P&ID's process diagrams and experience with applicable codes and standards.
• Proven organizational skills.
• Excellent verbal and written communication and listening skills required.
• Strong interpersonal skills.
• Proven problem solver, results focused, self-motivated.
• Ability to work at heights.
• Comfortable with traveling 80% of time.
• Must be able to work under pressure.
• Must be able to work individually and on a team.
• Drug screen and background check required.

• Ability to lift at least 50 pounds.
• Ability to reach with arms and use tools above/over the head.
• Ability to perform repetitive movements.
• Ability to use hands to grasp.
• Ability to stand (for extended periods of time), walk, stoop, kneel, squat, crawl and twist.
• Ability to sit, balance and climb ladders, scaffolds and other objects.
• Ability to carry tools.
• Ability to move in and around confined and cluttered places and uneven areas.
• Ability to work up to a 12-hour shift in all weather and temperature extremes.
• Ability to distinguish colors.
• Vision adequate to perform all required tasks.

• Offshore certifications such as HUET are a plus

• 401(k)
• Medical, dental and vision insurance
• Basic Life, AD&D, Short- and Long-term Disability insurance
• FSA & HSA
• Vacation/PTO

Founded in 1984, Firetrol is the national leader in fire protection & life safety services. We are currently seeking skilled Fire Sprinkler Technicians (Fitter) to join our team of over 900 of the best fire protection professionals in the industry.We are looking for a fire sprinkler technician to perform Contract & Service work. Requirements•Working knowledge of wet, dry, and pre-action systems as well as backflow and fire pumps.•Proficient in NFPA 13, 20 & 24 code requirements.•Ability to read fire system design drawings.•Ability to manage your job & helper no matter the size of the job.•Ability to use trade appropriate tools to perform daily pipe fitting duties efficiently and safety•Ability to train others to use trade appropriate tools efficiently and safely.BenefitsFiretrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

• Play a pivotal role in cultivating sales from both new and existing customers through a disciplined selling and bidding process.
• Hunt and close new business in manufacturing, energy, infrastructure, oil & gas and other industrial sectors
• Build and manage a strong pipeline of qualified prospects
• Maintain strong relationships with key accounts
• Track your activity and results in our CRM
• Crush quotas and celebrate wins

• Has 3+ years of success in B2B or industrial service sales (painting/coatings/blasting, etc experience is a huge plus)
• Has strong book of business in Manufacturing, Oil & Gas, or other industrial industries
• Communicates clearly, listens actively, and can build trust with engineers, executives, and more.
• Understands the sales process from cold outreach to close
• Is self-motivated, organized, and results-driven
• Willing to travel Texas region

• Competitive base salary + uncapped commission
• Company vehicle, phone, computer
• Strong back-end support from project management, field crews, and sales management
• Training, tools, and a team that has your back
• A culture built around excellence, integrity, and winning as a team