1,109 Sheet Metal jobs in the United States

• Work-life balance.
• Career advancement opportunities.
• A great manager and/or team.
• A compelling work culture and company values.
• A sense of purpose and employee appreciation.
• Support & Stability & Technology
• Training

• Determine sequence of installations by reading plans and working drawings
• Perform field take-offs and jobsite material inventories
• Engage in the assembly and installation of sheet metal duct work for air conditioning, refrigeration, and heating units used in schools, commercial and industrial buildings
• Working on elevated ground and maintaining balance when standing on restricted levels such as beams are also required skills.
• You must be able to work effectively and precisely while also contributing to a solid safety culture.

• 4+ Years of vocational preparation acquired in school, work, military, institutional, or vocational environment
• Certification in crane rigging and signaling
• Knowledge of SMACNA requirements and local and state codes.
• Ability to read and understand blueprints
• Ability to write reports with proper format, punctuation, spelling, and grammar
• Good verbal communication skills
• Basic competence in sheet-metal mathematics
• Team oriented with the ability to work well and communicate with others
• Neat, professional appearance

• Develops, fabricates, installs, and insulates HVAC supply and return duct systems, both in renovation and repair work. Installs fume hoods, ducts, and other ventilation systems. Assists in the installation of air handling units, steam and chilled water coils, autoclaves, and other heavy equipment. Performs electric and acetylene welding, brazing, and cutting; flat, vertical, and horizontal welding. Fabricates, installs, and/or maintains gutters, downspouts, grills, food carts, awnings, and various other metal fabrication as assigned by the supervisor.
• Removes and/or replaces pumps, fans, and electric motors around campus. Responsible for performing preventative maintenance on laboratory exhaust fans and motors. Repair/rebuild pumps, fans, and electric motors to be returned to service. Assist with plumbing, fountains, and flagpoles as needed.
• Reads and follows blueprints, written repair orders, and other instructions related to job duties. Maintains tools and work areas in a safe and workmanlike manner.
• Operates University vehicles and performs other related work as required in support of Facilities University.

• High school diploma or equivalent and two years' experience or a combination of post high school education and experience equal to two years. Technical or vocational may substitute for experience.
• A valid State of Florida or Georgia Driver's License or ability to obtain upon hire.

Adecco is assisting our client PowerRail recruit for a Sheet Metal Worker. This position involves fabricating, assembling, installing, and repairing sheet metal products and equipment by reading blueprints or instructions, selecting appropriate materials, and using tools such as shears, hammers, punches, drills, and CNC machines. Duties include measuring and marking materials, cutting, bending, and shaping metal, fastening seams and joints with welds, bolts, rivets, or solder, and smoothing or finishing surfaces. The role also requires maintaining and repairing equipment, transporting prefabricated parts, inspecting work for accuracy, and occasionally hiring, training, or supervising new employees or apprentices. Work may involve operating specialized machinery such as CNC brakes, shears, rollers, and pipe bending machines to meet project specifications. These are Monday-Friday dayshift roles. Pay rate starting at $18+ based on experience and qualifications.

Please review the below details. You must be qualified for this position and have proven and consistent prior experience in this field.

Summary: Sheet Metal Workers should report to the Production manager each day to see what needs to be completed. Sheet Metal Workers will perform the following duties: Fabricate, assemble, install, and repair sheet metal products and equipment, and other plates that need to be formed. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces.

Duties and Responsibilities include the following. Other duties may be assigned.

• Maintain equipment, make repairs or modifications when necessary.

• Fasten seams or joints together with welds, bolts, rivets, solder, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.

• Transport prefabricated parts to other factory locations for assembly and installation.

• Hire, train, or supervise new employees or apprentices.

• Lay out, measure, and mark dimensions and reference lines on material, such as sheet goods, using calculators, scribes, dividers, squares, or rulers.

• Fabricate or alter parts at shop, using shears, hammers, punches, or drills.

• Determine project requirements, such as scope, assembly sequences, or required methods or materials, using blueprints, drawings, or written or verbal instructions.

• Select gauges or types of sheet metal or nonmetallic material, according to product specifications.

• Shape metal material over anvils, blocks, or other forms, using hand tools.

• Trim, file, grind, deburr, buff, or smooth surfaces, seams, or joints of assembled parts, using hand tools or portable power tools.

• Inspect individual parts, assemblies, or installations, using measuring instruments, such as calipers, scales, or micrometers.

• Run CNC breaks, 10' shears, 6' Roller and/or pipe bending machine.

Interested and Qualified in this role? Apply today!

Pay Details: $18.00 per hour

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to

The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Pridestaff is currently seeking an experienced Sheet Metal Worker in Riverside, CA; the worker will fabricate, build, and install various types of metal structures. This is a full-time, contract-to-permanent position with an opportunity to grow. Please see the job requirements below to be considered.

• Pay rate: $18-$9.00 Per Hour ( 20- 21, depending on experience)
• Shift hours: Monday-Friday, 6 am to 2:30 pm no overtime
• Job requirements:
• Set up and operate fabricating machines such as shears, brakes, presses, forming rolls, and routers
• Familiar with the use of a manual kick press, arbor press and hydraulic press.
• Knows hand tools such as calipers, dials, micrometers.
• Able to read blueprints, use a microscope
• Cuts, bends, and shapes sheet metal to required dimensions.
• Trims, files, grinds, deburrs, buffs, and smooths surfaces.
• Must be able to read and speak English.
• At least 1 year of recent experience
• Able to operate a manual Lathe, with detailed attention (mainly used for swaging) experience a PLUS!

• Competitive pay
• Comprehensive benefits package
• Health benefits
• Paid holidays after 1500 hours

Compensation / Pay Rate (Up to): 18.00 - 19.00 Per Hour

SUMMARY DESCRIPTION

The essential function of the position within the organization is to perform skilled sheet metal fabrication, installation, maintenance and repair work on District properties.

This position description is not intended to be an exhaustive list of all duties, knowledge or abilities associated with this classification, but is intended to accurately reflect the primary job elements.

1.Performs skilled sheet metal fabrication, installation, maintenance and repair work to support the maintenance of District facilities.

2.Reads and interprets blueprints and other drawings; assists in estimating and planning project materials, costs and labor requirements.

3.Installs and/or assists in the installation of sheet metal in duct work, gutter systems, kitchen facilities, HVAC systems and other physical plant components.

4.May drive and operate trucks and other vehicles; operates various hand and power tools as necessary to accomplish tasks.

The position requires a high school diploma or equivalent and four (4) year related experience. The position also requires a journeyman sheet metal certification and valid driver's license.

(PROOF OF EDUCATION, TRAINING, AND/OR EXPERIENCE IS REQUIRED).

• Performs composite related fabrication of detail parts and subassemblies from carbon fiber, fiberglass and other lightweight materials commonly use in the aerospace industry.
• Performs automated lay-up machine set-up and operation.
• Performs composite lay-up, fabrication and assembly tasks.
• Performs machine set-up, machining, sheet metal fabrication and extrusion, tube bending and fabrication tasks.
• Assembles precision mechanical and electro-mechanical components.
• Assembles, repairs, modifies and installs various power plants and drive trains.
• Ability to understand the use and fabrication of pre-manufactured composite materials using, blueprints, engineering drawings and planning from nonconformance dispositions.
• Accomplishes these processes by using fabrication tooling materials and automated / motorized equipment.
• Accomplishes related functions to provide complete fabrication details and subassemblies via hand-lay-up methods or through the use of NC equipment.
• Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc., in order to accomplish work statement in accordance with planned operations.
• Prepares test articles, fixtures and data collection devices to perform various tests.
• Performs basic organic chemical conversion and paint preparation.
• Applies routine organic coatings for corrosion protection and appearance requirements.
• Works on articles of moderate complexity using established drawings and requirements.
• Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
• Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
• Maintain clean, neat, organized and FOD free work area.
• Coordinate pertinent information with employees on other shifts.
• Must be available for any shift. Variable Shift. Shift based on business needs.

• Experience in drilling sheet metal, composite and titanium. (5 years)

• High school diploma or GED and typically 1 or more years' related experience or an equivalent combination of education and experience.

Magna-Power Electronics, a Flemington, New Jersey based electronics manufacturer, is seeking a Sheet Metal Worker to join its dedicated world class team. With continued growth and recipient of the 2020 NJ Top Workplace, 2021 Great Places to Work™, and 2022 Hunterdon County Business of the Year awards, Magna-Power competes in a worldwide marketplace and addresses a broad range of applications, including: electric vehicle powertrain development and manufacturing, particle accelerators, semiconductor fabrication, cutting-edge energy research, national defense, among many others.

The Sheet Metal Worker will perform a combination of assembling and finishing of various metal and plastic machined components according to company specifications, using hand and power tools, reading blue prints, and from verbal instructions. In addition to operation of CNC machines and powder coating of components. Given the complex nature of the products, there will be significant hands-on training and interaction with various Magna-Power teams.

The Sheet Metal Worker is responsible for:

• Finishing aluminum, copper, steel, and plastic parts used in assembly of power supply units

• Grinding, filing, or deburring surfaces of parts using various methods and equipment

• Preparing parts for powder coating including washing and masking based on company specifications

• Setting up and operating CNC punch presses and press brake

• Pemming component parts based on company specifications

• Reading work orders and following bill of materials and bill of operations

• Setting up and assembling heat sinks, while working with the robotic arm

The education and experience for this position includes:

• High school diploma or GED

• Minimum 1-year experience is preferred

• Good mechanical aptitude using hand and power tools

• Ability to read a tape measure and perform basic math

• Knowledge in operating CNC machines and the associated measurement tools is preferred

• Knowledge and understanding BOMs, assembly drawings and other related manufacturing documents is preferred

In addition to competitive compensation, Magna-Power offers a comprehensive benefits package, which includes:

• Health insurance

• Dental insurance

• Vision insurance

• Life insurance

• Supplemental insurance

• 401k plan with company match

• Accrued paid time off

• Paid sick-time leave

• Tuition reimbursement

Excellent growth opportunities are available for individuals who are willing to learn and develop. Magna-Power Electronics values diversity in the workplace. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Should you require accommodations due to a disability at any time during the hiring and/or assessment process, we will make all reasonable efforts to accommodate your request.

Department

Production

Employment Type

Full-Time

Minimum Experience

Entry-level

Compensation

$21+/hour

Description

Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Atlanta, GA. Most positions are first shift with a pay range of up to $28/hour based on experience & skill level. If you are a Sheet Metal Worker and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career!

Job Scope :

• Select types of sheet metal according to building or design plans

• Measure and mark dimensions and reference lines on metal sheets

• Drill holes in metal for screws, bolts, and rivets

• Install metal sheets with supportive frameworks

• Fabricate or alter parts at construction sites

• Maneuver and anchor large sheet metal parts

• Fasten seams or joints by welding, bolting, riveting, or soldering

• Sheet metal workers use pieces of thin steel, aluminum, or other alloyed metal in both manufacturing and construction. Sheet metal products include heating and air conditioning ducts, rain gutters, outdoor signs, and siding.

Requirements:

• Previous Sheet Metal Experience

• Tools for the Trade

• Proper PPE must be worn

• OSHA 10 is Preferred

Company Details

Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.

Our comprehensive benefits include:

• Tradesmen+ Rewards Program – earn points for hours worked

• Vacation Pay

• Health insurance

• 401(k) profit-sharing savings plan

• Incentive programs

• Tool purchase programs & MORE!

Tradesmen International is an EO employer - M/F/Veteran/Disability

Click here to visit Tradesmen’s full website. (

Recruiter Name

Zakeem Bailey

Location

US-GA-NORCROSS

Posted Date 1 year ago (4/8/ :30 AM)

Req ID

Category Sheet Metal - Journeyman

Travel No

Job Board EV

Location US-GA-NORCROSS

Description

Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Atlanta, GA. Most positions are first shift with a pay range of up to $28/hour based on experience & skill level. If you are a Sheet Metal Worker and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career!

Job Scope :

• Select types of sheet metal according to building or design plans

• Measure and mark dimensions and reference lines on metal sheets

• Drill holes in metal for screws, bolts, and rivets

• Install metal sheets with supportive frameworks

• Fabricate or alter parts at construction sites

• Maneuver and anchor large sheet metal parts

• Fasten seams or joints by welding, bolting, riveting, or soldering

• Sheet metal workers use pieces of thin steel, aluminum, or other alloyed metal in both manufacturing and construction. Sheet metal products include heating and air conditioning ducts, rain gutters, outdoor signs, and siding.

Requirements:

• Previous Sheet Metal Experience

• Tools for the Trade

• Proper PPE must be worn

• OSHA 10 is Preferred

Company Details

Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.

Our comprehensive benefits include:

• Tradesmen+ Rewards Program – earn points for hours worked

• Vacation Pay

• Health insurance

• 401(k) profit-sharing savings plan

• Incentive programs

• Tool purchase programs & MORE!

Tradesmen International is an EO employer - M/F/Veteran/Disability

Click here to visit Tradesmen’s full website. (

Recruiter Name

Zakeem Bailey

Location

US-GA-LITHIA SPRINGS

Posted Date 1 year ago (4/8/ :30 AM)

Req ID

Category Sheet Metal - Journeyman

Travel No

Job Board EV

Location US-GA-LITHIA SPRINGS