14,903 Technical Installation jobs in the United States

The expected hiring range for this position is:

$36.85-$47.64.

Please note that the pay range information is a general guideline only. The pay offered to a selected candidate will be determined based on factors such the scope and responsibilities of the position, qualifications of the selected candidate, business considerations, internal equity, and external market pay for comparable jobs.

LOCATED IN LEAD, SOUTH DAKOTA

A Lead Technician is sought to join Fermilab's Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Project team. The LBNF/DUNE Project is hosted by Fermilab in Batavia, IL, but includes participation from universities and laboratories from around the world. The project includes construction of a beamline and near detector at Fermilab and a large underground detector at the Sanford Underground Research Facility (SURF) in Lead, South Dakota. LBNF/DUNE project will design and construct one of the largest proposed neutrino experiments in the world over the next several years.

Summary of Responsibilities: Based on expertise, general experience, and/or academic study, provides on-site support for an area of assignment pertaining to the installation of project components. Lead technicians will provide comprehensive direction to a group of on-site technicians.

You Will:

* Work one mile underground, with rotating shifts, and potential night and weekend work. Shift differential would be paid for the second shift.

* Operate as the foreman who leads, trains and assists technicians in multidisciplinary teams as assigned. Set goals, assign projects and contribute to performance appraisals for assigned technicians.

* Assistance with Installation of all infrastructure equipment required for the construction of two neutrino detectors, includes working at heights, network, cabling, detector safety systems, communications, electronics racks, HVAC, etc.

* Track daily activity and provide comprehensive shift reports.

* Assist in creating daily and weekly work plans

* You are responsible for all detector component movement on the level and within the cleanroom and cryostat. This includes use of small overhead cranes, hoists, mechanical connections, trolleys, winches, forklifts, etc.

* Abide by and are responsible for performing all duties in accordance with all environmental, health and safety regulations and Laboratory policies, procedures and practices pertinent to this position, including generating Hazard Analysis, and enforcing safety rules and regulations.

* Performs other duties as assigned.

We Are Looking For

Minimum Required Education and Experience: HS degree (or technical certificate orequivalent) plus 12+ years of advanced expertise and experience in a highly technical functionof strategic importance to a Laboratory project or experiment (e.g., cryo, radio frequency,radiation protection, clean room, etc.)

* Strong knowledge in formalized work planning and scheduling

* Demonstrated technical and problem-solving skills

* Formal industry certifications in one or more; forklift, aerial lift, crane or overhead crane, rigging, welding,

* Ability to recognize hazardous situations and recommend corrective measures

* Good interpersonal, communication skills

* Ability to work in a team environment.

* Excellent written and verbal communications skills to enable effective interaction with project, Fermilab, and stakeholder personnel.

* Strong analytical skills to identify trends and establish proactive corrective actions.

* Ability to use MS Office and document management systems

* Ability to work independently.

* Trade specific skills or management experience thereof - Electrical, HVAC, controls and instrumentation, survey, welding, plumbing, ironworking, fabrication, etc.

Physical Activity and Work Conditions

* Ability to perform physically demanding tasks, including lifting and carrying up to 50 pounds regularly.

* Prolonged periods of standing, walking, and climbing ladders or scaffolding.

* Frequent bending, kneeling, and reaching overhead.

* Ability to work in confined spaces and at various heights.

* Tolerance for exposure to varying weather conditions, including extreme heat, cold, and precipitation.

* Capability to wear and operate required personal protective equipment (PPE), including hard hats, safety glasses, gloves, and steel-toed boots.

* Sufficient visual and manual dexterity to operate tools and equipment safely.

* Ability to work extended hours and varying shifts, as needed.

* Ability to work in underground environments, including tunnels and shafts, with limited natural light.

Why Fermilab:
Fermilab is America's premier laboratory for particle physics and accelerator research, funded by the U.S. Department of Energy. We support discovery science experiments in Illinois and locations around the world, including deep underground mines in South Dakota and Canada, mountaintops in Arizona and Chile, CERN in Europe and the South Pole.

Drug-Free Workplace & Pre-Employment Screening

Fermilab is dedicated to fostering a safe, productive, and drug-free work environment. As part of the hiring process, candidates must successfully complete a background check and drug screening. Employment is contingent upon the successful completion of these screenings.

Equal Opportunity Statement

Fermilab is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories.

REAL-ID Requirement for access to Fermilab Campus
Fermilab requires all members of the public to produce a REAL-ID, or equivalent, to access the Fermilab Campus for interviews or career events. A list of acceptable forms of ID can be found here: If a candidate is selected for an interview but does not possess any of the equivalent documents, we may schedule a virtual interview.

What To Expect Next:
We'll be in touch! If your qualifications are in alignment with the position requirements, one of our recruiters will be reaching out to schedule a phone interview to learn more about your career interests and goals. In the meantime, we encourage you to check us out on Facebook, X, Instagram, LinkedIn, or our About Us page.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.

Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.

Principal Duties/Responsibilities:

· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

· Independently performs maintenance as per industry standards.

· Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures.

· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes

· Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data.

· Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

· Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

· Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

· Completes and conducts on-the-job training and technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry.

· Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate.

· Extensive travel required. (Local, National, International)

Desirable KSAs:

· Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment.

· Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems.

Competencies:

· Communications

· Customer Focus

· Personal Discipline

· Safety

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.

Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.

Principal Duties/Responsibilities:

· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.

· Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.

· Independently performs maintenance as per industry standards.

· Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures.

· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

· Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes

· Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data.

· Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.

· Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

· Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.

· Completes and conducts on-the-job training and technical self-study programs for career development.

· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

· High School Graduate or equivalent (GED).

· Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry.

· Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

· Must be able to use basic hand tools and specialized tools as appropriate.

· Extensive travel required. (Local, National, International)

Desirable KSAs:

· Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment.

· Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems.

Competencies:

· Communications

· Customer Focus

· Personal Discipline

· Safety

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.
Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor.
**Principal Duties/Responsibilities:**
· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools.
· Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment.
· Independently performs maintenance as per industry standards.
· Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures.
· May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.
· Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes
· Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data.
· Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development.
· Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.
· Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations.
· Completes and conducts on-the-job training and technical self-study programs for career development.
· Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions.
**Knowledge, Skills, Abilities (KSAs), & Competencies:**
**Essential KSAs:**
· High School Graduate or equivalent (GED).
· Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry.
· Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.
· Must be able to use basic hand tools and specialized tools as appropriate.
· Extensive travel required. (Local, National, International)
**Desirable KSAs:**
· Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment.
· Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems.
**Competencies:**
· Communications
· Customer Focus
· Personal Discipline
· Safety
**Physical Demands and Working Conditions:**
While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.
?
ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. ( is committed to providing equal employment opportunity in all aspects of employment to all applicants and employees, regardless of age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status.

Job Description

Job Description

Description:

Join Our Team as a Field Service Technician at DOC Services!

Are you a skilled technician looking to advance your career with a leading company that values your hard work and expertise? DOC Services Inc. is the perfect place for you! With over 35 years of experience and a reputation for excellence, we are committed to providing reliable maintenance solutions that keep our clients’ businesses running smoothly.

Why DOC Services Inc?

• Year-Round Stability : Enjoy consistent work.
• Growth and Development : Continuous training and opportunities to enhance your skills and advance your career.
• Comprehensive Support : Be part of a company that sets you up for success, with robust resources and a dedicated support system.
• Flexible Scheduling : Achieve work-life balance with schedules designed to fit your lifestyle.
• Top-Notch Benefits : Competitive compensation, 401(k) with company match, medical, dental, and vision insurance, life insurance, and disability coverage.

Your Role as a Field Service Technician You'll be at the forefront of ensuring equipment runs efficiently in big-box retail environments. Your main responsibilities include:

• Diagnosing and repairing mechanical and electrical failures on electromechanical equipment.
• Performing preventive maintenance while adhering to OSHA safety standards.
• Skillfully using hand and power tools for equipment assembly, disassembly, and repair.
• Promptly responding to service calls to keep our clients’ equipment operating seamlessly.
• Communicating effectively with customers and colleagues, embodying our commitment to top-tier service.

Minimum Qualifications:

• A high school diploma or GED.
• 2+ years of equipment repair experience or equivalent training.
• Strong mechanical and electrical skills, with the ability to read schematics.
• A valid driver's license with a clean driving record.
• Excellent interpersonal skills and a professional attitude.
• The ability to work independently, pay close attention to detail, and remain organized.
• Physical capability to stand, bend, drive for extended periods, lift up to 75 lbs, and work at heights over 6 feet.

What We Offer:

• Tools of the Trade : Company vehicle, phone, laptop, and gas card provided.
• Financial Security : Competitive pay and a 401(k) plan with company match.
• Health and Wellness : Comprehensive medical, dental, and vision insurance options.
• Career Advancement : Continuous training and professional development opportunities.
• Company Culture : Be part of a respected, nationwide service company that celebrates its heritage and looks forward to the future.

Join us and bring your expertise to a team that values quality, dedication, and professionalism. Apply today and become part of a company where your skills will be recognized and rewarded.

DOC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, disability, or any other federal, state, or local protected class.

Requirements:

Field Service Supervisor

Don't miss the opportunity to join a growing, people-focused company! Established in 1934 and headquartered in Des Moines, IA, EFCO serves a diverse range of customers worldwide. At EFCO, we embrace every challenge, turn vision into reality, and provide cutting-edge Innovative solutions. Our commitment to Super Service allows us to build lasting relationships grounded in Integrity. From engineering and design to manufacturing, supply, and field service, we deliver top-quality concrete forming and shoring products and services that make construction safer and more efficient; helping our customers realize the Lowest in-Place Concrete Cost (LIPCC).

Purpose : EFCO Corp. is seeking a hands-on, customer-focused professional to provide on-site training and support for our concrete forming systems. In this role, you'll work directly with customers to ensure safe, efficient assembly and use of EFCO products. You'll also act as a technical advisor, supporting sales teams and serving as a key liaison between customers and EFCO personnel.

EFCO Culture Statement

Act with INTEGRITY by demonstrating honesty, responsibility, trustworthiness, and respect in all actions. Strive for QUALITY through continuous improvement and data-driven decision-making. Embrace INNOVATION by being self-aware, collaborative, and curious. Deliver SUPER SERVICE by creating value and consistently exceeding customer expectations.

Key Responsibilities

• Erect EFCO Forming Equipment on Job Sites (60%)
  Lead and assist with on-site assembly, manage labor and equipment staging, troubleshoot issues, and ensure compliance with safety guidelines. Guide customers through cycling procedures and complete detailed field reports for each visit.
• Identify Customer Solutions & Troubleshoot (10%)
  Work closely with sales and engineering teams to assess customer needs and provide solutions. Act as a technical resource and coach customers on best practices.
• Plan & Coordinate Field Visits (10%)
  Review construction plans and formwork drawings, forecast workload with the district manager, verify equipment lists, and coordinate travel and site scheduling.
• Support Sales Through On-Site Demonstrations (10%)
  Partner with Territory Managers to demonstrate form cycling, setup, and stripping during pre-sale activities. Assist with project scheduling for customer success.
• Deliver Job Site Safety Talks (5%)
  Conduct at least two toolbox safety meetings per month to promote a strong safety culture.
• Special Projects & Other Duties (5%)
  Contribute to internal projects like submitting FORM Marks articles and other assigned tasks.

Qualifications

• High school diploma or equivalent; bachelor's degree in engineering or 5+ years as a foreman or superintendent
• Blueprint reading skills
• Excellent communication, decision-making, and leadership abilities
• Strong problem-solving skills and a proactive attitude
• Passion for construction and delivering high levels of customer service
• Physical ability to climb, lift/push/pull up to 150 lbs, and work at heights and in demanding environments
• Valid driver's license and ability to travel extensively (2-4 nights per week)

Total Rewards

• Medical, dental, and vision insurance
• Flexible Spending Account
• Health Savings Account
• Life and AD&D insurance
• 401k options
• PTO
• Tuition Reimbursement
• 10 paid holidays
• Employee Assistance Program

EFCO is an Equal Opportunity Employer. Qualified applicants for employment will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Our client, a leading manufacturer of specialized industrial machinery, is seeking a highly skilled and customer-focused Field Service Engineer to manage the installation, maintenance, and repair of their equipment across the region, with a primary focus on the Houston, Texas, US area. This role requires a strong technical aptitude, excellent problem-solving skills, and the ability to work independently in customer facilities. The ideal candidate will have a solid background in mechanical and electrical systems, with a passion for ensuring optimal equipment performance and customer satisfaction.

As a Field Service Engineer, you will be responsible for the complete installation of new equipment at customer sites, including commissioning, calibration, and initial testing to ensure functionality and compliance with specifications. You will perform scheduled preventive maintenance, diagnosing and repairing any malfunctions or breakdowns to minimize downtime. Your duties will include troubleshooting complex mechanical, electrical, and hydraulic systems. Providing technical support and training to customer operators and maintenance personnel will be a key aspect of the role, empowering them to operate and maintain the equipment effectively. You will document all service activities, including installation reports, maintenance logs, and repair histories, utilizing company software and systems. Proactively identifying potential issues and recommending solutions to prevent future problems is essential. You will also manage your service schedule, parts inventory, and travel arrangements to ensure efficient operations. Building and maintaining strong relationships with customers will be paramount to success, ensuring they receive timely and high-quality support.

The required qualifications include an Associate's or Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related technical field. A minimum of 5 years of experience in field service, installation, or maintenance of industrial machinery is essential. Proficiency in reading and interpreting mechanical and electrical schematics and blueprints is a must. Strong diagnostic and troubleshooting skills across a range of equipment types are required. Excellent customer service, communication, and interpersonal skills are vital. The ability to travel frequently (up to 75%) and work flexible hours, including occasional weekends, is necessary. A valid driver's license and a clean driving record are also required. Experience with specific types of industrial equipment relevant to our client's product line is highly desirable. This role demands a self-motivated individual with a keen eye for detail and a commitment to technical excellence.

Company Description:

Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.

At Crown, we know that our employees are the driving force behind our success in the material handling industry.  We cultivate a culture of passionate people and inspired innovation.  We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.

From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.

We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.

Want to Learn More?  Watch A Day in the Life of a Crown Field Service Technician! click here .

Job Posting External

Job Duties

• Troubleshoot, diagnose and repair Crown and all other makes of lift trucks.
• Perform all assigned planned maintenance on customer lift trucks.
• Maintain a service van and its inventory.
• Process paperwork after completion of each job.

Minimum Qualifications

• Less than 2 years related experience
• High school diploma or equivalent
• Valid driver's license, good driving record, and ability to safely operate lift trucks.

Preferred Qualifications

• Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.
• Good written/verbal communication and customer care skills.
• Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.
• Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment.
• Industry related training is preferred
• Ability to read and understand service manuals, plan, and follow-through

Work Authorization:

Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.

No agency calls please.

Compensation and Benefits:

Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.

Crown also offers Service Technicians:

• Award-Winning Service Training
• Company Vehicle for Field Service Technicians
• Tool Insurance
• No Flat Rate
• 40 Hours Per Week plus Overtime
• Uniforms
• Specialty Tools
• Primarily 1st Shift
• Career Advancement Opportunities

EOE Veterans/Disabilities