62 Test Design jobs in the United States

**Introduction**
Test Design is a forward-thinking semiconductor team dedicated to delivering testable, high-performance silicon in innovative ways. We're looking for a DFT Engineer who values teamwork and brings hands-on experience with Synopsys tools. If you enjoy solving complex challenges and contributing to a mission-driven engineering culture, you will be a great fit for our team.
**Your role and responsibilities**
As a Test Design Engineer, you will be responsible for architecting and implementing DFT strategies for complex SoC designs using Synopsys toolsets. You will collaborate closely with RTL designers, verification engineers, and physical design teams to ensure high test coverage and manufacturability. Your key responsibilities will include:
* Developing and integrating DFT architectures including scan insertion, boundary scan, MBIST, and JTAG.
* Utilizing Synopsys tools such as DFT Compiler, TetraMax and TestMax for design testability analysis and test point insertion
* Generating test patterns, simulating fault coverage and validating correct circuit behavior and coverage.
* Supporting silicon bring-up and failure analysis with test vectors and diagnostics.
* Driving DFT methodology improvements and automation for efficiency and scalability.
* Collaborating with cross-functional teams to ensure DFT requirements are met throughout the design cycle.
**Required technical and professional expertise**
* 5+ years of hands-on experience in DFT implementation for complex ASIC/SoC designs in advanced process nodes (e.g., 7nm, 5nm, or below).
* Proven expertise with Synopsys DFT tools including DFT Compiler, TetraMAX, TestMAX, and Formality.
* Deep understanding of scan architecture, ATPG, boundary scan, MBIST, IJTAG, and hierarchical DFT methodologies.
* Demonstrated experience in developing and deploying DFT strategies across multiple tape-outs.
* Strong scripting skills in Python, TCL, and Bash for automation and tool integration.
* Solid grasp of IEEE1500, IEEE1687 , fault models (stuck-at, transition, path delay, bridging ) and test coverage metrics.
* Experience working in Unix/Linux-based environments with large-scale computing and version control systems (e.g., Git).
**Preferred technical and professional experience**
* 10+ years of experience in DFT with a track record of successful silicon bring-up and production test support.
* Experience with low-power DFT techniques, scan compression, and hierarchical DFT
* Experience with DFT-aware physical design flows, including timing closure and floorplanning for test logic.
* Proficiency in Makefile-based build systems and CI/CD pipelines for regression and test automation.
* Experience mentoring junior engineers and leading cross-functional DFT initiatives.
IBM is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, caste, genetics, pregnancy, disability, neurodivergence, age, veteran status, or other characteristics. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status.

**THE COMPANY**
**Silvus Technologies** is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide the vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons.
Silvus StreamCaster® radios are being rapidly adopted by customers all over the world ranging from the U.S. and Allied Nations Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Superbowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers.
Wouldn't you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of **"Keeping Our Heroes Connected ( "?**
Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can provide a rewarding internship that creates a pathway to a fulfilling career.
THE OPPORTUNITY
Silvus is seeking a full-time **_Manufacturing Automated Test Design Engineer_** that will report to the _VP of Engineering_ on the _Engineering_ team. The successful individual in this role will be able to design and implement efficient and streamlined automated production line test setup and programs for wireless communication systems in a manufacturing environment.
The _Manufacturing Automated Test Design Engineer_ position will be based at Silvus Technologies' headquarters in the heart of vibrant **West Los Angeles,** **CA** and is 100% onsite, Monday through Friday.
_The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion._
ROLE AND RESPONSIBILITIES
+ Design and implement comprehensive test plans to provide full coverage of wireless communication system feature sets
+ Design and implement logging and log analysis tools to capture performance of both the systems under test and the test infrastructure itself
+ Take ownership of production test station design, implementation, maintenance, repair, and upgrade; continuous improvement of manufacturing test efficiency.
+ Collaborate with RF and systems engineering teams to understand performance requirements and establish production tests and performance thresholds.
+ Partner with engineering and quality teams to validate new testing approaches for rollout to production.
+ Work closely with the software development team to augment production test systems to support rollout of new features and product configurations.
+ Basic manufacturing failure troubleshooting and root cause analysis for production failures escalated to engineering.
REQUIRED QUALIFICATIONS
+ Bachelor's degree in engineering, electronics, manufacturing, or related technical field
+ Minimum 2 years of relevant test engineering experience
+ Demonstrated experience in wireless/networking or an electronics manufacturing environment
+ Proficient in at least one programming language (C/C++ or Python)
+ Proficient with RF instruments such as signal generators and spectrum analyzers
+ Demonstrated organization skill and the ability to manage multiple tasks including running multiple tests simultaneously
+ Knowledgeable about automatic test equipment (ATE) implementations.
+ **Must be a U.S. Citizen** due to clients under U.S. government contracts.
PREFERRED KNOWLEDGE SKILLS AND ABILITIES
+ Programing with APIs for test instruments.
+ Programing and scripting in Linux OS
+ Shell language such as BASH
+ MATLAB
WORKING CONDITIONS & PHYSICAL REQUIREMENTS
+ Occasional exposure to heat, cold, and allergens while performing tests or demonstrations in the field.
+ While performing the duties of this job, the employee is required to do the following:
+ Lift equipment up to 20 lbs. for the set-up of demonstrations and testing.
+ Perform bending and reaching movements to place items on lower and higher shelves.
+ Kneeling or squatting to access lower shelves.
+ Walking/Moving in the labs.
**COMPENSATION**
_The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate's experience and qualifications._
CA Pay Range
$100,000-$130,000 USD
**NOTE - As a U.S. Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements are needed for some Engineering or R&D roles. This generally does NOT apply to International positions; only job postings for positions located in the U.S. Exceptions will be included in the Required Qualifications section of the posted position.**
**_All Employment is contingent upon the successful clearance of a background check._**
Silvus is proud to be an equal-opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws.
We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation.
_*Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies._

**THE COMPANY**
**Silvus Technologies** is dedicated to one mission: connecting those who keep us safe. We do so by delivering the most advanced Mobile Ad-hoc Network (MANET) radios powered by our custom and ever evolving Mobile-Networked MIMO waveform. Together, our radios and waveform provide the vital communications for mission critical applications in the harshest environments from underground tunnels to high altitude balloons.
Silvus StreamCaster® radios are being rapidly adopted by customers all over the world ranging from the U.S. and Allied Nations Departments of Defense, to International, Federal, State and Local Law Enforcement agencies, all the way to the Superbowl, Grammys and industry-leading drone, robot, and other unmanned systems manufacturers.
Wouldn't you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of **"Keeping Our Heroes Connected ( "?**
Silvus' rapid growth is fueled by a focus on research and innovation and a team of the most passionate, skilled, and creative thinking individuals. If you are looking for a challenging experience, you owe it to yourself to learn how Silvus can provide a rewarding internship that creates a pathway to a fulfilling career.
THE OPPORTUNITY
Silvus is seeking a full-time **_Manufacturing Automated Test Design Engineer_** that will report to the _VP of Engineering_ on the _Engineering_ team. The successful individual in this role will be able to design and implement efficient and streamlined automated production line test setup and programs for wireless communication systems in a manufacturing environment.
The _Manufacturing Automated Test Design Engineer_ position will be based at Silvus Technologies' headquarters in the heart of vibrant **West Los Angeles,** **CA** and is 100% onsite, Monday through Friday.
_The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion._
ROLE AND RESPONSIBILITIES
+ Design and implement comprehensive test plans to provide full coverage of wireless communication system feature sets
+ Design and implement logging and log analysis tools to capture performance of both the systems under test and the test infrastructure itself
+ Take ownership of production test station design, implementation, maintenance, repair, and upgrade; continuous improvement of manufacturing test efficiency.
+ Collaborate with RF and systems engineering teams to understand performance requirements and establish production tests and performance thresholds.
+ Partner with engineering and quality teams to validate new testing approaches for rollout to production.
+ Work closely with the software development team to augment production test systems to support rollout of new features and product configurations.
+ Basic manufacturing failure troubleshooting and root cause analysis for production failures escalated to engineering.
REQUIRED QUALIFICATIONS
+ Bachelor's degree in engineering, electronics, manufacturing, or related technical field
+ Minimum 2 years of relevant test engineering experience
+ Demonstrated experience in wireless/networking or an electronics manufacturing environment
+ Proficient in at least one programming language (C/C++ or Python)
+ Proficient with RF instruments such as signal generators and spectrum analyzers
+ Demonstrated organization skill and the ability to manage multiple tasks including running multiple tests simultaneously
+ Knowledgeable about automatic test equipment (ATE) implementations.
+ **Must be a U.S. Citizen** due to clients under U.S. government contracts.
PREFERRED KNOWLEDGE SKILLS AND ABILITIES
+ Programing with APIs for test instruments.
+ Programing and scripting in Linux OS
+ Shell language such as BASH
+ MATLAB
WORKING CONDITIONS & PHYSICAL REQUIREMENTS
+ Occasional exposure to heat, cold, and allergens while performing tests or demonstrations in the field.
+ While performing the duties of this job, the employee is required to do the following:
+ Lift equipment up to 20 lbs. for the set-up of demonstrations and testing.
+ Perform bending and reaching movements to place items on lower and higher shelves.
+ Kneeling or squatting to access lower shelves.
+ Walking/Moving in the labs.
**COMPENSATION**
_The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate's experience and qualifications._
CA Pay Range
$100,000-$130,000 USD
**NOTE - As a U.S. Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements are needed for some Engineering or R&D roles. This generally does NOT apply to International positions; only job postings for positions located in the U.S. Exceptions will be included in the Required Qualifications section of the posted position.**
**_All Employment is contingent upon the successful clearance of a background check._**
Silvus is proud to be an equal-opportunity employer, and we value diversity. We do not discriminate on the basis of race, color, age, religion or belief, ancestry, national origin, sex (including pregnancy), sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, physical or mental disability, protected veteran status, genetic information, political affiliation, or any other factor protected by applicable federal, state, or local laws.
We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive benefits and privileges of employment. Please contact us to request accommodation.
_*Silvus does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to Silvus Technologies._

Overview SOS International LLC (SOSi) is seeking a Test, Design and Evaluation Subject Matter Expert (SME) to support the government customer in the Falls Church, Virginia area. Essential Job Duties Designs, assesses, develops, formulates and evaluates test plans for candidate technologies, integrated technologies, and capabilities. Analyzes alternatives, assesses objectives, proposes key objectives (e.g., demonstrating performance metrics). Evaluates performance, utility, and potential applications during testing. Assesses technology readiness levels (TRLs) demonstrated, verifies reported performance, evaluates actual demonstrated performance, and reprioritize efforts accordingly. Produces monthly Special Access Program (SAP) reports and monthly technical project test assessment reports. Conducts program demonstration and experimentation analysis of alternatives. Minimum Requirements Active in Scope TS/SCI Clearance; eligible for Special Access Program read on; willing to submit to a counterintelligence polygraph if required. Master's degree or higher in engineering or other technological discipline. 20+ years in an engineering or other related field. Expert in evaluating, designing evaluating test plans. Expert in testing candidate technologies and capabilities. Expert in alternative analysis. Expert in developing technology performance metrics to evaluate industry developments for consideration by the Department of Defense and the Intelligence Community. Expert in evaluating performance, utility and potential applications during testing. Preferred Qualifications Department of Defense or military experience desired; experience in capability development, technology transition, and acquisition a plus. Work Environment Working conditions are normal for an office environment. Working at SOSi All interested individuals will receive consideration and will not be discriminated against for any reason.
SOSi is an equal employment opportunity employer and affirmative action employer. All interested individuals will receive consideration and will not be discriminated against on the basis of race, color, religion, sex, national origin, disability, age, sexual orientation, gender identity, genetic information, or protected veteran status. SOSi takes affirmative action in support of its policy to advance diversity and inclusion of individuals who are minorities, women, protected veterans, and individuals with disabilities.

**Job Description**
The Endicott, New York campus of BAE Systems provides safety critical electronics for commercial and military aircraft and environmentally friendly electric drive solutions for transportation industries. More than 1,300 employees located here support the headquarters of two major business segments of Electronic Systems: Controls and Avionics Solutions and Power and Propulsion Solutions.
**Controls and Avionics Solutions** is a leader in the design, development, production, and support of flight and mission- critical products for commercial and military aircraft, including fly-by-wire flight controls, full authority digital engine controls, and power management systems. Our smart electronics are designed to streamline and simplify control of the flight deck environment through intuitive, integrated technology that ensures optimal aircraft performance. Our new technologies include the development of an active inceptor system that provides tactile cueing for pilots, and solutions for hybrid and all-electric aircraft to enable the future of air travel. To learn more about BAE Systems Controls and Avionics Solutions check us out at; Summary**
As a Senior Test Equipment Design Engineer you will develop systems for testing products that support military and commercial aircraft and ground vehicles and be part of our Test Engineering unit, you will join a cross-functional group of professionals that are responsible for all aspects of test systems development including mechanical, electrical, software and fabrication. With our team, you will have the opportunity to utilize and develop your skills in a fast paced and exiting environment for a broad range of test systems from simple circuit card testers to very large and complex systems integration labs.
We are looking for an Electrical Engineer with Test Equipment design experience to add to our team. This is an exciting opportunity to develop test systems to support products for some of the world s most advanced military and commercial aircraft and ground vehicles.
**In this Sr Test Equipment Design Engineer position, you will make impacts in the following ways;**
+ Perform technical work that requires the diversified application of engineering principles, theories, concepts, and techniques to the detailed design, development and integration of Test Equipment designs used to support the integration/certification and acceptance testing of electronic assemblies, subassemblies, and systems of varying technologies.
+ Perform technical analysis, engineering design, and test equipment related assignments for the selection and application of state-of-the-art test design principles, theories and techniques for complex subassemblies, assemblies or functional systems in support of system and top level assembly acceptance testing and integration of company products
+ Consult with engineering specialists to devise new techniques and approaches and provide solutions to a wide range of technical problems dealing with the selection, design and implementation of test strategies in support of acceptance and performance test methodologies. Make independent decisions based on available data, selection of materials and required parameters.
+ Work from technical objectives, overall schedules and expected results as specified by supervisor or senior engineering personnel. May lead project segments including responsibility for achievement of schedule, fiscal and technical performance objectives.
+ Support assignments that are broad and may include:
+ design and development of new test techniques as a result of independent research study
+ design and development of test plans, procedures, test strategies, and test requirements of company products
+ design and development of manual and automated test equipment
+ testing and integration of procedures, initial prototype equipment and systems integration support
+ contributions to proposal efforts
+ Coordinates and directs the work efforts of lower level engineers and support personnel.
+ Coordinates the preparation of charts, diagrams and reports expressing recommendations, technical accomplishments and project progress measured against specific plans.
+ Attends conferences and meetings to represent assigned activity.
Because this role involves a combination of collaborative/in-person and independent work, it will take the form of a **hybrid work format** , with time split between working onsite and remotely.
**-?xml:namespace prefix = "o" ns = "urn:schemas-microsoft-com:office:office" /->**
**Required Education, Experience, & Skills**
+ Bachelor's Degree in Electrical Engineering from an accredited college or university or its equivalent and a minimum of six (6) years work experience; or a Master's Degree and three (3) years experience.
+ Test Equipment requirements development, documentation, and verification
+ Proficient with Computer Aided Design (CAD) tools used for schematic capture of printed circuit board designs
+ All aspects of Test System hardware design and documentation from top assembly to subassemblies, including assembly drawings, schematics, wire lists, parts lists, printed circuit boards, interconnect diagrams, configuration drawings, etc.
+ Excellent integration, troubleshooting, and debug skills.
+ Experience working with avionic interfaces.
+ Good communication skills, written and verbal.
**Preferred Education, Experience, & Skills**
+ Experience with serial communication busses (1553, ARINC-429, CAN, RS-232/422/485, TTP, Ethernet)
+ Experience with Mentor Graphics PWB design tools
+ Experience with the development of test equipment for engine controls, flight controls, and weapon controls computers.
**Pay Information**
Full-Time Salary Range: $99200 - $168600
Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
**Senior Test Equipment Design Engineer**
**113982BR**
EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

**Description**
**SAIC** is seeking an **Automated Test Equipment (ATE) Design Engineer**  to support the  **Middletown, RI** engineering team. Our team supports the Naval Undersea Warfare Center (NUWC) Division Newport in the design and development of several different ATE systems for U.S. Navy torpedoes. These systems allow the fleet to test critical hardware components and sub-assemblies, as well as full torpedoes, to ensure they are ready for service.
**Job Summary:** You will work as a part of a team comprised of electrical, computer, mechanical, and systems engineers as well as other test design engineers to design, develop, and verify Navy ATE systems:
· Works with systems engineers to analyze hardware and software requirements provided by the Navy.
· Works with electrical and mechanical engineers to research and design ATE hardware components and wiring.
· Works with other test engineers to develop test software applications in NI TestStand and C++.
· Supports bench and design verification testing of ATE hardware and software against requirements.
· Works with technical writers to accurately document design elements and develop end-user manuals.
· Works with project managers to identify technical issues and present solutions to the Navy
· Works with junior engineers to provide mentorship and guidance.
**Work environment:** The SAIC Middletown engineering team is responsible for providing professional, efficient support to multiple Navy contracts and customers. Staff are expected to complete tasks with limited supervision but are provided clear direction by management and task-leads. SAIC managers support giving staff blocks of meeting-free time in order to complete detailed tasks without distraction but also requires team members to work together to solve more complex problems.
**Location/Schedule:** Work is performed at SAIC but also allows for remote/work at home. Candidates are expected to be able to be on-site approximately half-time in order to work with ATE hardware in-person. The on-site work is at: SAIC, 28 Jacome Way, Middletown, RI. Flexible work schedule options are also available. Engineers may partake in SAIC's 9/80 schedule to have every other Friday off or a 4/10 schedule as desired.
**Growth:** Our management team is focused on enabling our engineers to succeed and achieve long term career goals and promoting leaders from within our programs. We have multiple long-term programs within the local area and are continuously pursuing similar expansions in the future.
**Here is a link to the program page where you can see a list of all of our open roles and apply directly:** & Experience:**
+ B.S. in Electrical Engineering, Computer Engineering, Computer Science, or related engineering discipline.
+ 9+ years of experience developing software to automate testing of electronic devices and equipment.
+ Experience developing software to interface test sequences with calibrated test equipment and switch matrixes. 
+ Experience using NI TestStand and C++.
+ Experience with NI LabVIEW and/or CVI.
+ Experience developing documentation to capture software design details as well as test plans and procedures.
+ Must be able to work in a team environment while completing tasks in an unsupervised and self-directed fashion.
**Clearance:**
+ Must have the ability to obtain an Interim Secret clearance to start and maintain an Active Secret clearance for the duration of the contract.
**Desired Skills:**
+ Experience with Navy (or at least DoD related) programs.
+ Electrical circuit or system design.
+ Familiarity with System Engineering concepts.
+ Experience with MS Office products, including Excel, Word, Powerpoint, and Teams.
REQNUMBER: 2504752
SAIC is a premier technology integrator, solving our nation's most complex modernization and systems engineering challenges across the defense, space, federal civilian, and intelligence markets. Our robust portfolio of offerings includes high-end solutions in systems engineering and integration; enterprise IT, including cloud services; cyber; software; advanced analytics and simulation; and training. We are a team of 23,000 strong driven by mission, united purpose, and inspired by opportunity. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $6.5 billion. For more information, visit saic.com. For information on the benefits SAIC offers, see Working at SAIC. EOE AA M/F/Vet/Disability

**Description**
**SAIC** is seeking an **Automated Test Equipment (ATE) Design Engineer**  to support the  **Middletown, RI** engineering team. Our team supports the Naval Undersea Warfare Center (NUWC) Division Newport in the design and development of several different ATE systems for U.S. Navy torpedoes. These systems allow the fleet to test critical hardware components and sub-assemblies, as well as full torpedoes, to ensure they are ready for service.
**Job Summary:** You will work as a part of a team comprised of electrical, computer, mechanical, and systems engineers as well as other test design engineers to design, develop, and verify Navy ATE systems:
+ Works with systems engineers to analyze hardware and software requirements provided by the Navy.
+ Works with electrical and mechanical engineers to research and design ATE hardware components and wiring.
+ Works with other test engineers to develop test software applications in NI TestStand and C++.
+ Supports bench and design verification testing of ATE hardware and software against requirements.
+ Works with technical writers to accurately document design elements and develop end-user manuals.
+ Works with project managers to identify technical issues and present solutions to the Navy.
+ Works with junior engineers to provide mentorship and guidance.
**Work environment:** The SAIC Middletown engineering team is responsible for providing professional, efficient support to multiple Navy contracts and customers. Staff are expected to complete tasks with limited supervision but are provided clear direction by management and task-leads. SAIC managers support giving staff blocks of meeting-free time in order to complete detailed tasks without distraction but also requires team members to work together to solve more complex problems.
**Location/Schedule:** Work is performed at SAIC but also allows for remote/work at home. Candidates are expected to be able to be on-site approximately half-time in order to work with ATE hardware in-person. The on-site work is at: SAIC, 28 Jacome Way, Middletown, RI. Flexible work schedule options are also available. Engineers may partake in SAIC's 9/80 schedule to have every other Friday off or a 4/10 schedule as desired.
**Growth:** Our management team is focused on enabling our engineers to succeed and achieve long term career goals and promoting leaders from within our programs. We have multiple long-term programs within the local area and are continuously pursuing similar expansions in the future.
**Here is a link to the program page where you can see a list of all of our open roles and apply directly:** & Experience:**
+ B.S. in Electrical Engineering, Computer Engineering, Computer Science, or related engineering discipline.
+ 5+ years of experience developing software to automate testing of electronic devices and equipment.
+ Experience developing software to interface test sequences with calibrated test equipment and switch matrixes. 
+ Experience using NI TestStand and C++.
+ Experience with NI LabVIEW and/or CVI.
+ Experience developing documentation to capture software design details as well as test plans and procedures.
+ Must be able to work in a team environment while completing tasks in an unsupervised and self-directed fashion.
**Clearance:**
+ Must have the ability to obtain an Interim Secret clearance to start and maintain an Active Secret clearance for the duration of the contract.
**Desired Skills:**
+ Experience with Navy (or at least DoD related) programs.
+ Electrical circuit or system design.
+ Familiarity with System Engineering concepts.
+ Experience with MS Office products, including Excel, Word, Powerpoint, and Teams.
REQNUMBER: 2508269
SAIC is a premier technology integrator, solving our nation's most complex modernization and systems engineering challenges across the defense, space, federal civilian, and intelligence markets. Our robust portfolio of offerings includes high-end solutions in systems engineering and integration; enterprise IT, including cloud services; cyber; software; advanced analytics and simulation; and training. We are a team of 23,000 strong driven by mission, united purpose, and inspired by opportunity. Headquartered in Reston, Virginia, SAIC has annual revenues of approximately $6.5 billion. For more information, visit saic.com. For information on the benefits SAIC offers, see Working at SAIC. EOE AA M/F/Vet/Disability

RELOCATION ASSISTANCE: Relocation assistance may be available
CLEARANCE TYPE: Secret
TRAVEL: Yes, 10% of the Time
**Description**
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
**Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation.**
**Northrop Grumman Aeronautics Systems** sector is seeking a highly motivated **Structures Test Fixture Design Engineer (Level 5)** to join our team of qualified, diverse individuals within our **Test & Evaluation** organization. This role is located in **Melbourne, FL** .
In this role you will be the subject matter expert and resource for the Structural Test Design team. You will be responsible for the designing and developing large-scale structural test fixtures. You will lead and provide mentorship to less experienced engineers during Critical Design Review (CDR) and Preliminary Design Review (PDR). You will be responsible for developing and delivering engaging, data-driven presentations tailored to internal leadership and external customers.
**_Note:_** _This is an individual contributor role with no direct reports._
**Key Responsibilities may include, but are not limited to:**
+ Reviewing designs for compliance, technically and requirements.
+ Coordinate design criteria with Internal Customers, Vendors, Test Engineering, EHS and Facilities Personnel.
+ Evaluating design factors, taking into account ease manufacturing, cost, safety, maintenance and end user.
+ Identifying design errors, omissions, and other deficiencies, and recommend revisions and/or improvements.
+ Analyzing damage tolerance, durability, design allowables and structural modeling.
**You will excel in this role if you:**
+ Have hands-on experience designing large-scale structural test fixtures for aircraft or aerospace components.
+ Enjoy working in a large team environment.
+ Demonstrate strong leadership and communications skills.
+ Are self-motivated and proactive.
+ Take a team centric approach to problem solving.
+ Are detail-oriented and able to work with little supervision.
+ Are willing to learn additional engineering disciplines.
We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do.
**Basic Qualifications:**
+ Must have a Bachelor's Degree in a STEM (Science, Technology, Engineering, or Math) discipline and 12 years of related professional/military experience; OR a Master's Degree in a STEM discipline and 10 years of related professional/military experience; OR a Ph.D. in a STEM discipline and 8 years of related professional/military experience.
+ Professional experience using computer-aided design (CAD) software, NX10, and/or GD&T
+ Must have the ability to work flexible hours, including evenings and weekends, as necessary, to support flight test and lab schedules.
+ Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company.
**Preferred Qualifications:**
+ Structural Test experience across multiple engineering disciplines
+ Strong interpersonal and leadership skills
+ Extensive professional experience with NX10 and GD&T
**#AS-FA3**
Primary Level Salary Range: $147,700.00 - $221,500.00
The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.
Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.
The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.
Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Title: Applications Dev & Test - Software Design Engineer 2
Location: Hybrid (Redmond, WA)

Position ID: 148526-1

Duration: 12 month contract + extension

Summary:

This is an exciting opportunity to work on Xbox Game Streaming. The Xbox Platform team works with Azure and datacenter teams to ensure the health, compliance, and security of custom Xbox devices deployed in Azure datacenters.

The main function of this role is to run operations for the fleet of hardware. This includes work to design, develop, implement, test, and maintain specialized client/server applications, and provide major enhancement of existing systems. Success will depend on organization, clear communication, problem solving, technical excellence, and a drive for results.

Job Responsibilities:
• Analyze hardware failures and coordinate repairs with datacenter technicians
• Document issues and resolutions to improve trouble shooting guides
• Contribute to tools and automations for scaling and auto-resolving common issues
• Track and report compliance requirements, such as sensitive data sharing
• Work with engineering teams in Xbox to communicate issues and resolve bugs
• Create detailed work schedules for long running execution plans
• Fine-tune and improve a variety of software projects
• Analyze and review enhancement requests and specifications
• Implement system software and customize to client requirements
• Prepare the detailed software specifications and test plans

Qualifications:
• Bachelor's degree in a technical field such as computer science, computer engineering or related field required
• 2-4 years experience required
• A solid foundation in computer science, with strong competencies in data structures, algorithms, and software design
• large systems software design and development experience
• Experience performing in-depth troubleshooting and unit testing with both new and legacy production systems
• experience in programming and experience with problem diagnosis and resolution