302 Boilermaker jobs in the United States

Job DescriptionQualification Highlights•Must have 4+ years' experience as a Boilermaker Helper, Boilermaker Ironworker or comparable position with Experience•Must possess all Knowledge Skills and Abilities for positions (see below).•Must be able to meet all physical requirements.•Must be able to work at heights in excess of 300 ft.•Must have all required tools.•Must have reliable transportation.Reports to PositionThis position does not have any direct reports.ResponsibilitiesPosition Responsibilities•Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.•Identify all tools required for tasks.•Identify safety risks and the precautions required to eliminate those risks.•Fabricate equipment according to blueprints or instructions from supervisors.•Hoist equipment and tools into location via bull rigging or crane.•Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.•Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.•Bolt aligned structural-steel members in position for permanent riveting or bolting.•Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.•Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.Required Knowledge, Skills, and Abilities•Basic knowledge of hand tools and power tools.•Knowledge of industrial machinery and equipment•Understand load properties of cables, ropes, hoists, and chains.•Organization and time management•Good problem-solving abilities•Good aptitude and manual dexterity•Knowledge of math concepts, geometry, and layout•Good reading comprehension•Ability to work with others - team player•Good communication skills with co-workers and supervisors•Commitment to Zachry values and safety rules and regulationsQualificationsPreferred Qualifications•Prefer experience with industrial machinery installation, repair, and maintenance of Power Generation machines and equipment.•The preferred candidate will have experience working as a Millwright helper on a Industrial project.•Zachry/JVIC ROF'ed employee.•Former Zachry/JVIC Employee.•Basic Computer efficiency•Formal/technical education.Physical Requirements•Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting.•Will talk and hear to communicate.•Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.•May be required to pick up, lift, carry and move up to 50lbs.•Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements.•Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE.•Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots.Required Tools- list to be provided.ZACHRY/JVIC is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer.

Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.

Locates and marks reference points for columns or plates on foundation, using master straight edge, squares, transit and measuring tape and applying knowledge of geometry.

Attaches rigging or signals crane operator to lift components to specified position.

Aligns structures or plates sections to assemble boiler frame, tanks or vats using plumb bobs, levels, wedges, dogs or turnbuckles.

Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together.

Bolts or arc-welds structures and sections together.

Positions drums and headers into supports or bolts or welds supports to frame.

Aligns water tubes, connects and expands ends to drums and headers using tube expander.

Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches.

Performs minor maintenance or cleaning activities with tools and equipment.

Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers.

Signals crane operator in lifting parts to specific positions.

Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.

Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts.

May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers.

May line firebox with refractory brick and blocks.

May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed.

Flame cutting and knowledge of torch use.

Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Summary: Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.

Responsibilities:

• Locates and marks reference points for columns or plates on foundation, using master straight edge, squares, transit and measuring tape and applying knowledge of geometry.
• Attaches rigging or signals crane operator to lift components to specified position.
• Aligns structures or plates sections to assemble boiler frame, tanks or vats using plumb bobs, levels, wedges, dogs or turnbuckles.
• Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together.
• Bolts or arc-welds structures and sections together.
• Positions drums and headers into supports or bolts or welds supports to frame.
• Aligns water tubes, connects and expands ends to drums and headers using tube expander.
• Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches.
• Performs minor maintenance or cleaning activities with tools and equipment.
• Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers.
• Signals crane operator in lifting parts to specific positions.
• Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.
• Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts.
• May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers.
• May line firebox with refractory brick and blocks.
• May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed.
• Flame cutting and knowledge of torch use.
• Responsible for observing and complying with all safety and project rules. Performs other duties as required.

• Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry.
• Attaches rigging or signals crane operator to lift components to specified position.
• Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles.
• Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together.
• Bolts or arc-welds structures and sections together. Positions drums and headers into supports or bolts or welds supports to frame.
• Aligns water tubes, connects and expands ends to drums and headers using tube expander.
• Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches
• Performs minor maintenance or cleaning activities with tools and equipment.
• Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers.
• Signals crane operator in lifting parts to specific positions.
• Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.
• Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts.
• May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers.
• May line firebox with refractory brick and blocks.
• May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed.
• Flame cutting and knowledge of torch use.
• Responsible for observing and complying with all safety and project rules. Performs other duties as required.

• 3 + years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.
• Must have a valid TWIC card

Brown & Root Industrial Services - JobID: 5001136996300 (Maintenance Mechanic) As a Boilermaker at Brown & Root, you'll: Align structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles; Install manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers; Repair boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates; Assist in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.Hiring Immediately >>

• Run air/power hand tools and standard hand toolsAttach electrical wiring and shielded cable as required
• Read and understand wiring schematics and piping layout
• Cutting and threading of pipe
• Ensure that parts are assembled on boiler per instructions for proper appearance and function
• Read and interpret shop orders
• Must be capable of training other employees in said department
• Function with minimal amount of supervision
• Able to reproduce all operations within acceptable quality guidelines
• Prompt, dependable and reliable in work attendancePerform other related duties as required

• Competitive Salaries
• Medical and Dental Insurance Covered 100% by Superior Boiler for Employees & Families
• PTO Day 1
• 401k with Company Matching
• Vision Insurance
• Short-Term Disability
• Critical Illness Insurance
• Accident Insurance
• Life Insurance
• Flex Spending Accounts
• Health Savings Accounts
• Perfect Attendance Awards

EMCOR Industrial Services, a division of EMCOR Group, Inc. is comprised of eight companies that support major industries through maintenance, construction, engineering, manufacturing, and fabrication services.

Job Title: Boilermaker

Job Summary: Our companies are currently looking for boilermakers to assist in the repair, retube, rebuild, and fabrication of shell and tube heat exchangers, as well as other equipment, used in the refining, petrochemical, and chemical processing industry.

Essential Duties and Responsibilities:

• Breakdown heat exchangers and related equipment
• Perform mechanical repairs, including welding, sawing, and grinding
• Assist with the line-up and assembly of tubesheets and baffles
• Load tubes into baffle assemblies
• Install test heads on bundles
• Assist with hydro testing
• Assist with loading and unloading of trucks transporting heat exchangers
• Boltup and breakdown equipment
• Operate powered industrial trucks and mechanical lift equipment, including overhead cranes
• Operate various power tools, including portable grinder, roll motor, tugger, knocking gun, and impact gun
• Read tape measure down to 1/16 of an inch
• Assists in tool room and with tool record keeping
• Maintain clean work area

Qualifications:

• High school diploma or equivalent
• Ability to read and write in English
• Basic computer skills
• Ability to read and interpret drawings and measuring devices
• Experience working in the trades or adjacent industries preferred

Working Environment and Physical Demands:

• Exposed to hot and cold environments, noise, and dust
• May be exposed to chemical and pinching hazards
• Must be able to lift 50 pounds
• Must be able to stand for prolonged periods of time
• Must be able to bend, push/pull, twist, stoop, squat, lift, and reach overhead

EMCOR Industrial Services companies are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.

Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine.

EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process it is probably fraudulent.

Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Total Safety is seeking Boilermakers (NCCER preferred) with Deluge Systems/Bolt Up/Screw Pipe experience who can provide maintenance services, installation of pipe, fittings, valves, and piping systems, repairs and inspects all boiler components along with working the towers and exchangers in industrial plants and/or industrial settings to keep them in good working order.

Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. Our Core Values are People, Safety & Wellbeing, Accountability, Responsibility, Empowerment, Honesty, Transparency, and Integrity.

Essential Duties:

Experience in maintaining job site documentation, i.e., job time sheets, and building drawings.

Ability to read and interpret blueprints, diagrams, and specifications used in installation activities.

Proficient in hand tool, power tool, and pipe fitting experience.

Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to forty feet, working in ducts, crawl spaces, above ceilings, etc.

Ability to work alternative shifts or weekends and to travel upon request to meet customer installation schedule.

Tighten and loosen bolts on flange connections and manways as per ISO drawings and work plan.

Assist with installation/removal of blinds as needed for pressure testing purposes.

Possess skilled knowledge of pipefittings, bolts, valves, etc. as required.

Assemble and secure pipes, tubes, fittings, and related equipment according to specifications.

Use impact wrenches, combination wrenches, and line up pins to install valves and piping spools.

Performs other related duties as required and assigned.

Skills and Experience:

3+ year's boilermaker experience in the fire protection, petrochemical, or oil refinery related industry preferred.

Ability to carry and move equipment and tools weighing up to forty pounds.

Valid driver's license from state of residence and valid proof of vehicle insurance, satisfactory driving record required.

Must be able to pass a comprehensive background and drug/alcohol screening.

The ability to successfully pass plant security, drug screen (to include UA, hair follicle & breathalyzer).

Working Environment:

Industrial or shop environment. Frequently exposed to wet, humid, outside weather conditions and vibration. Works in some customer environments during later part of training. May be exposed to high pressure, chemicals, gas releases, or fire. The noise level in work environment is usually moderate.

Educational Requirements:

High School Diploma or equivalent education and/or experience.

NCCER in Pipefitting/Boilermaker (preferred)

Current TWIC

Total Safety and its subsidiaries afford equal opportunity in employment to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law. Total Safety is an Equal Opportunity Employer.

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws.
For further information, please review the Know Your Rights notice from the Department of Labor.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Location: Corpus Christi, Texas

Company: Flint Hills Resources

Career Field: Operations & Manufacturing

Job Number: 148960